lkml.org 
[lkml]   [2017]   [Oct]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] drm/bridge/synopsys: dsi: add optional pixel clock
Date
The pixel clock is optional. When available, it offers a better
preciseness for timing computations.

Signed-off-by: Philippe Cornu <philippe.cornu@st.com>
---
drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c | 24 ++++++++++++++++++------
1 file changed, 18 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c b/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c
index d9cca4f..8b3787d 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c
@@ -225,6 +225,7 @@ struct dw_mipi_dsi {
void __iomem *base;

struct clk *pclk;
+ struct clk *px_clk;

unsigned int lane_mbps; /* per lane */
u32 channel;
@@ -753,24 +754,28 @@ void dw_mipi_dsi_bridge_mode_set(struct drm_bridge *bridge,
struct dw_mipi_dsi *dsi = bridge_to_dsi(bridge);
const struct dw_mipi_dsi_phy_ops *phy_ops = dsi->plat_data->phy_ops;
void *priv_data = dsi->plat_data->priv_data;
+ struct drm_display_mode px_clk_mode = *mode;
int ret;

clk_prepare_enable(dsi->pclk);

- ret = phy_ops->get_lane_mbps(priv_data, mode, dsi->mode_flags,
+ if (dsi->px_clk)
+ px_clk_mode.clock = clk_get_rate(dsi->px_clk) / 1000;
+
+ ret = phy_ops->get_lane_mbps(priv_data, &px_clk_mode, dsi->mode_flags,
dsi->lanes, dsi->format, &dsi->lane_mbps);
if (ret)
DRM_DEBUG_DRIVER("Phy get_lane_mbps() failed\n");

pm_runtime_get_sync(dsi->dev);
dw_mipi_dsi_init(dsi);
- dw_mipi_dsi_dpi_config(dsi, mode);
+ dw_mipi_dsi_dpi_config(dsi, &px_clk_mode);
dw_mipi_dsi_packet_handler_config(dsi);
dw_mipi_dsi_video_mode_config(dsi);
- dw_mipi_dsi_video_packet_config(dsi, mode);
+ dw_mipi_dsi_video_packet_config(dsi, &px_clk_mode);
dw_mipi_dsi_command_mode_config(dsi);
- dw_mipi_dsi_line_timer_config(dsi, mode);
- dw_mipi_dsi_vertical_timing_config(dsi, mode);
+ dw_mipi_dsi_line_timer_config(dsi, &px_clk_mode);
+ dw_mipi_dsi_vertical_timing_config(dsi, &px_clk_mode);

dw_mipi_dsi_dphy_init(dsi);
dw_mipi_dsi_dphy_timing_config(dsi);
@@ -784,7 +789,7 @@ void dw_mipi_dsi_bridge_mode_set(struct drm_bridge *bridge,

dw_mipi_dsi_dphy_enable(dsi);

- dw_mipi_dsi_wait_for_two_frames(mode);
+ dw_mipi_dsi_wait_for_two_frames(&px_clk_mode);

/* Switch to cmd mode for panel-bridge pre_enable & panel prepare */
dw_mipi_dsi_set_mode(dsi, 0);
@@ -878,6 +883,13 @@ static int dw_mipi_dsi_bridge_attach(struct drm_bridge *bridge)
return ERR_PTR(ret);
}

+ dsi->px_clk = devm_clk_get(dev, "px_clk");
+ if (IS_ERR(dsi->px_clk)) {
+ ret = PTR_ERR(dsi->px_clk);
+ dev_dbg(dev, "Unable to get optional px_clk: %d\n", ret);
+ dsi->px_clk = NULL;
+ }
+
/*
* Note that the reset was not defined in the initial device tree, so
* we have to be prepared for it not being found.
--
1.9.1
\
 
 \ /
  Last update: 2017-10-26 18:10    [W:0.048 / U:9.692 seconds]
©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site