lkml.org 
[lkml]   [2017]   [Oct]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v1 1/2] dt-bindings: display: stm32: add a 2nd endpoint
Date
ltdc can have up to 2 endpoints:
- dpi external gpios: for rgb panels or external bridge ICs.
- dpi internal ios: connected internally to dsi.

Note: Refer to the reference manual to know if the dsi is
present on your device.

Signed-off-by: Philippe Cornu <philippe.cornu@st.com>
---
Documentation/devicetree/bindings/display/st,stm32-ltdc.txt | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt b/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt
index 74b5ac7..0292522 100644
--- a/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt
+++ b/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt
@@ -10,7 +10,11 @@
- "lcd" for the clock feeding the output pixel clock & IP clock.
- resets: reset to be used by the device (defined by use of RCC macro).
Required nodes:
- - Video port for RGB output.
+ - Video port for DPI RGB output: ltdc has one video port with up to 2
+ endpoints:
+ - for external dpi rgb panel or bridge, using gpios.
+ - for internal dpi input of the MIPI DSI host controller.
+ Note: These 2 endpoints cannot be activated simultaneously.

* STMicroelectronics STM32 DSI controller specific extensions to Synopsys
DesignWare MIPI DSI host controller
--
1.9.1
\
 
 \ /
  Last update: 2017-10-26 13:49    [W:0.059 / U:4.944 seconds]
©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site