lkml.org 
[lkml]   [2017]   [Oct]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] I2C-S3C2410: Use common error handling code in s3c24xx_i2c_probe()
Date
From: Markus Elfring <elfring@users.sourceforge.net>
Date: Wed, 25 Oct 2017 15:00:35 +0200

Add a jump target so that a bit of exception handling can be better reused
at the end of this function.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
---
drivers/i2c/busses/i2c-s3c2410.c | 19 +++++++++----------
1 file changed, 9 insertions(+), 10 deletions(-)

diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c
index 5d97510ee48b..304a6d492c8c 100644
--- a/drivers/i2c/busses/i2c-s3c2410.c
+++ b/drivers/i2c/busses/i2c-s3c2410.c
@@ -1168,8 +1168,7 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev)
clk_disable(i2c->clk);
if (ret != 0) {
dev_err(&pdev->dev, "I2C controller init failed\n");
- clk_unprepare(i2c->clk);
- return ret;
+ goto unprepare_clock;
}

/*
@@ -1180,24 +1179,21 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev)
i2c->irq = ret = platform_get_irq(pdev, 0);
if (ret <= 0) {
dev_err(&pdev->dev, "cannot find IRQ\n");
- clk_unprepare(i2c->clk);
- return ret;
+ goto unprepare_clock;
}

ret = devm_request_irq(&pdev->dev, i2c->irq, s3c24xx_i2c_irq,
0, dev_name(&pdev->dev), i2c);
if (ret != 0) {
dev_err(&pdev->dev, "cannot claim IRQ %d\n", i2c->irq);
- clk_unprepare(i2c->clk);
- return ret;
+ goto unprepare_clock;
}
}

ret = s3c24xx_i2c_register_cpufreq(i2c);
if (ret < 0) {
dev_err(&pdev->dev, "failed to register cpufreq notifier\n");
- clk_unprepare(i2c->clk);
- return ret;
+ goto unprepare_clock;
}

/*
@@ -1217,12 +1213,15 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev)
if (ret < 0) {
pm_runtime_disable(&pdev->dev);
s3c24xx_i2c_deregister_cpufreq(i2c);
- clk_unprepare(i2c->clk);
- return ret;
+ goto unprepare_clock;
}

dev_info(&pdev->dev, "%s: S3C I2C adapter\n", dev_name(&i2c->adap.dev));
return 0;
+
+unprepare_clock:
+ clk_unprepare(i2c->clk);
+ return ret;
}

static int s3c24xx_i2c_remove(struct platform_device *pdev)
--
2.14.3
\
 
 \ /
  Last update: 2017-10-25 15:07    [W:0.683 / U:0.144 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site