lkml.org 
[lkml]   [2017]   [Oct]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] hwmon/amc6821: Use common error handling code in amc6821_init_client()
On Tue, Oct 24, 2017 at 10:10:13PM +0200, SF Markus Elfring wrote:
> From: Markus Elfring <elfring@users.sourceforge.net>
> Date: Tue, 24 Oct 2017 22:04:20 +0200
>
> * Add two jump targets so that a bit of exception handling can be better
> reused at the end of this function.
>
> This issue was detected by using the Coccinelle software.
>
> * Delete the local variable "err" which became unnecessary
> with this refactoring.
>
> Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>

Nack; I am not a friend of that much verboseness to start with,
and I don't think the patch improves readability.

Guenter

> ---
> drivers/hwmon/amc6821.c | 77 ++++++++++++++++++-------------------------------
> 1 file changed, 28 insertions(+), 49 deletions(-)
>
> diff --git a/drivers/hwmon/amc6821.c b/drivers/hwmon/amc6821.c
> index 46b4e35fd555..5c067de3fdcf 100644
> --- a/drivers/hwmon/amc6821.c
> +++ b/drivers/hwmon/amc6821.c
> @@ -885,70 +885,42 @@ static int amc6821_detect(
> static int amc6821_init_client(struct i2c_client *client)
> {
> int config;
> - int err = -EIO;
>
> if (init) {
> config = i2c_smbus_read_byte_data(client, AMC6821_REG_CONF4);
> -
> - if (config < 0) {
> - dev_err(&client->dev,
> - "Error reading configuration register, aborting.\n");
> - return err;
> - }
> + if (config < 0)
> + goto report_read_failure;
>
> config |= AMC6821_CONF4_MODE;
> -
> if (i2c_smbus_write_byte_data(client, AMC6821_REG_CONF4,
> - config)) {
> - dev_err(&client->dev,
> - "Configuration register write error, aborting.\n");
> - return err;
> - }
> + config))
> + goto report_write_failure;
>
> config = i2c_smbus_read_byte_data(client, AMC6821_REG_CONF3);
> -
> - if (config < 0) {
> - dev_err(&client->dev,
> - "Error reading configuration register, aborting.\n");
> - return err;
> - }
> + if (config < 0)
> + goto report_read_failure;
>
> dev_info(&client->dev, "Revision %d\n", config & 0x0f);
>
> config &= ~AMC6821_CONF3_THERM_FAN_EN;
> -
> if (i2c_smbus_write_byte_data(client, AMC6821_REG_CONF3,
> - config)) {
> - dev_err(&client->dev,
> - "Configuration register write error, aborting.\n");
> - return err;
> - }
> + config))
> + goto report_write_failure;
>
> config = i2c_smbus_read_byte_data(client, AMC6821_REG_CONF2);
> -
> - if (config < 0) {
> - dev_err(&client->dev,
> - "Error reading configuration register, aborting.\n");
> - return err;
> - }
> + if (config < 0)
> + goto report_read_failure;
>
> config &= ~AMC6821_CONF2_RTFIE;
> config &= ~AMC6821_CONF2_LTOIE;
> config &= ~AMC6821_CONF2_RTOIE;
> - if (i2c_smbus_write_byte_data(client,
> - AMC6821_REG_CONF2, config)) {
> - dev_err(&client->dev,
> - "Configuration register write error, aborting.\n");
> - return err;
> - }
> + if (i2c_smbus_write_byte_data(client, AMC6821_REG_CONF2,
> + config))
> + goto report_write_failure;
>
> config = i2c_smbus_read_byte_data(client, AMC6821_REG_CONF1);
> -
> - if (config < 0) {
> - dev_err(&client->dev,
> - "Error reading configuration register, aborting.\n");
> - return err;
> - }
> + if (config < 0)
> + goto report_read_failure;
>
> config &= ~AMC6821_CONF1_THERMOVIE;
> config &= ~AMC6821_CONF1_FANIE;
> @@ -958,14 +930,21 @@ static int amc6821_init_client(struct i2c_client *client)
> else
> config &= ~AMC6821_CONF1_PWMINV;
>
> - if (i2c_smbus_write_byte_data(
> - client, AMC6821_REG_CONF1, config)) {
> - dev_err(&client->dev,
> - "Configuration register write error, aborting.\n");
> - return err;
> - }
> + if (i2c_smbus_write_byte_data(client, AMC6821_REG_CONF1,
> + config))
> + goto report_write_failure;
> }
> return 0;
> +
> +report_read_failure:
> + dev_err(&client->dev,
> + "Error reading configuration register, aborting.\n");
> + return -EIO;
> +
> +report_write_failure:
> + dev_err(&client->dev,
> + "Configuration register write error, aborting.\n");
> + return -EIO;
> }
>
> static int amc6821_probe(struct i2c_client *client,
> --
> 2.14.3
>

\
 
 \ /
  Last update: 2017-10-24 22:18    [W:0.126 / U:0.192 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site