lkml.org 
[lkml]   [2017]   [Oct]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 5/7] gpio: brcmstb: correct the configuration of level interrupts
Date
This commit corrects a bug when configuring the GPIO hardware for
IRQ_TYPE_LEVEL_LOW and IRQ_TYPE_LEVEL_HIGH interrupt types. The
hardware is now correctly configured to support those types.

Fixes: 19a7b6940b78 ("gpio: brcmstb: Add interrupt and wakeup source support")
Signed-off-by: Doug Berger <opendmb@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Gregory Fong <gregory.0xf0@gmail.com>
---
drivers/gpio/gpio-brcmstb.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/gpio/gpio-brcmstb.c b/drivers/gpio/gpio-brcmstb.c
index 513de4936a25..183863902f7f 100644
--- a/drivers/gpio/gpio-brcmstb.c
+++ b/drivers/gpio/gpio-brcmstb.c
@@ -137,13 +137,13 @@ static int brcmstb_gpio_irq_set_type(struct irq_data *d, unsigned int type)

switch (type) {
case IRQ_TYPE_LEVEL_LOW:
- level = 0;
+ level = mask;
edge_config = 0;
edge_insensitive = 0;
break;
case IRQ_TYPE_LEVEL_HIGH:
level = mask;
- edge_config = 0;
+ edge_config = mask;
edge_insensitive = 0;
break;
case IRQ_TYPE_EDGE_FALLING:
--
2.14.1
\
 
 \ /
  Last update: 2017-10-24 21:57    [W:0.344 / U:0.128 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site