lkml.org 
[lkml]   [2017]   [Oct]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/2] dt-bindings: mmc: add bindings for hi3798cv200-dw-mshc
On Wed, Oct 18, 2017 at 07:16:27AM -0400, Jiancheng Xue wrote:
> From: tianshuliang <tianshuliang@hisilicon.com>
>
> Hisilicon hi3798cv200 SoC extends the dw-mshc controller
> for additional clock control. Add device tree bindings for
> hi3798cv200-dw-mshc.
>
> Signed-off-by: tianshuliang <tianshuliang@hisilicon.com>
> Signed-off-by: Jiancheng Xue <xuejiancheng@hisilicon.com>
> ---
> .../bindings/mmc/hi3798cv200-dw-mshc.txt | 51 ++++++++++++++++++++++
> 1 file changed, 51 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/mmc/hi3798cv200-dw-mshc.txt
>
> diff --git a/Documentation/devicetree/bindings/mmc/hi3798cv200-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/hi3798cv200-dw-mshc.txt
> new file mode 100644
> index 0000000..845c32c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mmc/hi3798cv200-dw-mshc.txt
> @@ -0,0 +1,51 @@
> +* Hisilicon specific extensions to the Synopsys Designware Mobile
> + Storage Host Controller
> +
> +Read synopsys-dw-mshc.txt for more details
> +
> +The Synopsys designware mobile storage host controller is used to interface
> +a SoC with storage medium such as eMMC or SD/MMC cards. This file documents
> +differences between the core Synopsys dw mshc controller properties described
> +by synopsys-dw-mshc.txt and the properties used by the Hisilicon specific
> +extensions to the Synopsys Designware Mobile Storage Host Controller.
> +
> +Required Properties:
> +
> +* compatible: should be one of the following.
> + - "hisilicon,hi3798cv200-dw-mshc": for controllers with hi3798cv200 specific extensions.
> +
> +Optional Properties:
> +* clocks: from common clock binding: if ciu-drive and ciu-sample are
> + specified in clock-names, should contain handles to these clocks.
> +
> +* clock-names:Apart from the clock-names described in synopsys-dw-mshc.txt

space ^

> + two more clocks "ciu-drive" and "ciu-sample" are supported. They are used
> + to control the clock phases, "ciu-sample" is required for tuning high-speed modes.

wrap your lines.

> +
> +Example:
> +
> + /* for Hi3798cv200 */
> +
> + /* SoC portion */
> + emmc: mmc@9830000 {
> + compatible = "hisilicon,hi3798cv200-dw-mshc";
> + reg = <0x9830000 0x10000>;
> + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&crg HISTB_MMC_CIU_CLK>,
> + <&crg HISTB_MMC_BIU_CLK>,
> + <&crg HISTB_MMC_SAMPLE_CLK>;
> + clock-names = "ciu", "biu", "ciu-sample";
> + };
> +
> + /* Board portion */

Don't show the board/soc split in examples.

> + &emmc {
> + status = "okay";
> + num-slots = <1>;
> + fifo-depth = <256>;
> + clock-frequency = <200000000>;
> + cap-mmc-highspeed;
> + mmc-ddr-1_8v;
> + mmc-hs200-1_8v;
> + non-removable;
> + bus-width = <8>;
> + };
> --
> 2.7.4
>

\
 
 \ /
  Last update: 2017-10-24 20:46    [W:0.047 / U:0.040 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site