lkml.org 
[lkml]   [2017]   [Oct]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH V3 1/4] thermal/drivers/hisi: Put platform code together
Date
From: Kevin Wangtao <kevin.wangtao@linaro.org>

Reorganize the code for next patches by moving the functions upper in
the file which will prevent a forward declaration. There is no functional
change here.

Signed-off-by: Kevin Wangtao <kevin.wangtao@linaro.org>
Tested-by: Daniel Lezcano <daniel.lezcano@linaro.org> # hikey6220
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
drivers/thermal/hisi_thermal.c | 76 +++++++++++++++++++++---------------------
1 file changed, 38 insertions(+), 38 deletions(-)

diff --git a/drivers/thermal/hisi_thermal.c b/drivers/thermal/hisi_thermal.c
index b48e47e..ffa00b4 100644
--- a/drivers/thermal/hisi_thermal.c
+++ b/drivers/thermal/hisi_thermal.c
@@ -201,6 +201,44 @@ static void hisi_thermal_disable_sensor(struct hisi_thermal_data *data)
clk_disable_unprepare(data->clk);
}

+static int hisi_thermal_setup(struct hisi_thermal_data *data)
+{
+ struct hisi_thermal_sensor *sensor = &data->sensor;
+ int ret;
+
+ /* enable clock for tsensor */
+ ret = clk_prepare_enable(data->clk);
+ if (ret)
+ return ret;
+
+ /* disable module firstly */
+ hisi_thermal_reset_enable(data->regs, 0);
+ hisi_thermal_enable(data->regs, 0);
+
+ /* select sensor id */
+ hisi_thermal_sensor_select(data->regs, sensor->id);
+
+ /* setting the hdak time */
+ hisi_thermal_hdak_set(data->regs, 0);
+
+ /* setting lag value between current temp and the threshold */
+ hisi_thermal_set_lag(data->regs, HISI_TEMP_LAG);
+
+ /* enable for interrupt */
+ hisi_thermal_alarm_set(data->regs, sensor->thres_temp);
+
+ hisi_thermal_reset_set(data->regs, HISI_TEMP_RESET);
+
+ /* enable module */
+ hisi_thermal_reset_enable(data->regs, 1);
+ hisi_thermal_enable(data->regs, 1);
+
+ hisi_thermal_alarm_clear(data->regs, 0);
+ hisi_thermal_alarm_enable(data->regs, 1);
+
+ return 0;
+}
+
static int hisi_thermal_get_temp(void *__data, int *temp)
{
struct hisi_thermal_data *data = __data;
@@ -291,44 +329,6 @@ static void hisi_thermal_toggle_sensor(struct hisi_thermal_sensor *sensor,
on ? THERMAL_DEVICE_ENABLED : THERMAL_DEVICE_DISABLED);
}

-static int hisi_thermal_setup(struct hisi_thermal_data *data)
-{
- struct hisi_thermal_sensor *sensor = &data->sensor;
- int ret;
-
- /* enable clock for tsensor */
- ret = clk_prepare_enable(data->clk);
- if (ret)
- return ret;
-
- /* disable module firstly */
- hisi_thermal_reset_enable(data->regs, 0);
- hisi_thermal_enable(data->regs, 0);
-
- /* select sensor id */
- hisi_thermal_sensor_select(data->regs, sensor->id);
-
- /* setting the hdak time */
- hisi_thermal_hdak_set(data->regs, 0);
-
- /* setting lag value between current temp and the threshold */
- hisi_thermal_set_lag(data->regs, HISI_TEMP_LAG);
-
- /* enable for interrupt */
- hisi_thermal_alarm_set(data->regs, sensor->thres_temp);
-
- hisi_thermal_reset_set(data->regs, HISI_TEMP_RESET);
-
- /* enable module */
- hisi_thermal_reset_enable(data->regs, 1);
- hisi_thermal_enable(data->regs, 1);
-
- hisi_thermal_alarm_clear(data->regs, 0);
- hisi_thermal_alarm_enable(data->regs, 1);
-
- return 0;
-}
-
static int hisi_thermal_probe(struct platform_device *pdev)
{
struct hisi_thermal_data *data;
--
2.7.4
\
 
 \ /
  Last update: 2017-10-22 17:53    [W:0.040 / U:0.312 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site