lkml.org 
[lkml]   [2017]   [Oct]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 1/5] dt-bindings: input: Add Atmel PTC subsystem bindings
Date
Add description of the Atmel PTC subsystem bindings.

Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Acked-by: Rob Herring <robh@kernel.org>
---
.../devicetree/bindings/input/atmel,ptc.txt | 67 ++++++++++++++++++++++
1 file changed, 67 insertions(+)
create mode 100644 Documentation/devicetree/bindings/input/atmel,ptc.txt

diff --git a/Documentation/devicetree/bindings/input/atmel,ptc.txt b/Documentation/devicetree/bindings/input/atmel,ptc.txt
new file mode 100644
index 000000000000..a183fd511e04
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/atmel,ptc.txt
@@ -0,0 +1,67 @@
+Atmel PTC Subsystem
+
+The Atmel Peripheral Touch Controller subsystem offers built-in hardware
+for capacitive touch measurement on sensors that function as buttons, sliders
+and wheels.
+
+1) PTC Subsystem node
+
+Required properties:
+- compatible: Must be "atmel,sama5d2-ptc"
+- reg: Address, length of the shared memory and ppp registers location
+ and length.
+- clocks: Phandlers to the clocks.
+- clock-names: Must be "ptc_clk", "ptc_int_osc", "slow_clk".
+- #address-cells: Must be one. The cell is the button or scroller id.
+- #size-cells: Must be zero.
+
+Example:
+ ptc@fc060000 {
+ compatible = "atmel,sama5d2-ptc";
+ reg = <0x00800000 0x10000
+ 0xfc060000 0xcf>;
+ interrupts = <58 IRQ_TYPE_LEVEL_HIGH 7>;
+ clocks = <&ptc_clk>, <&main>, <&clk32k>;
+ clock-names = "ptc_clk", "ptc_int_osc", "slow_clk";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ [ child node definitions... ]
+ };
+
+2) Scroller / buttons subnodes
+
+Subnodes describe the kind of sensors the customer want to use. They have to be
+named according to their function: button, slider or wheel.
+
+2.1) Scroller subnodes
+
+Required properties:
+- reg: Id of the scroller, each id must be different.
+
+Example:
+ slider@0 {
+ reg = <0>;
+ };
+
+ wheel@1 {
+ reg = <1>;
+ };
+
+2.2) Button subnodes
+
+Required properties:
+- reg: Id of node used for the button, each id must be
+ different.
+- linux,keycode: Key code of the button.
+
+Example:
+ button@8 {
+ reg = <8>;
+ linux,keycode = <2>;
+ };
+
+ button@9 {
+ reg = <9>;
+ linux,keycode = <3>;
+ };
--
2.12.2
\
 
 \ /
  Last update: 2017-10-22 17:40    [W:0.153 / U:0.024 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site