lkml.org 
[lkml]   [2017]   [Oct]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/3] arm: dts: mt7623: update usb related nodes
Date
The current usb related nodes are out-of-date, so we make them be
consistent with the binding documents.

Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
---
arch/arm/boot/dts/mt7623.dtsi | 16 ++++++++++------
1 file changed, 10 insertions(+), 6 deletions(-)

diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
index 6c2c8c8..84a3f27 100644
--- a/arch/arm/boot/dts/mt7623.dtsi
+++ b/arch/arm/boot/dts/mt7623.dtsi
@@ -788,7 +788,7 @@
interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_LOW>;
clocks = <&hifsys CLK_HIFSYS_USB0PHY>,
<&topckgen CLK_TOP_ETHIF_SEL>;
- clock-names = "sys_ck", "free_ck";
+ clock-names = "sys_ck", "ref_ck";
power-domains = <&scpsys MT2701_POWER_DOMAIN_HIF>;
phys = <&u2port0 PHY_TYPE_USB2>, <&u3port0 PHY_TYPE_USB3>;
status = "disabled";
@@ -798,8 +798,6 @@
compatible = "mediatek,mt7623-u3phy",
"mediatek,mt2701-u3phy";
reg = <0 0x1a1c4000 0 0x0700>;
- clocks = <&clk26m>;
- clock-names = "u3phya_ref";
#address-cells = <2>;
#size-cells = <2>;
ranges;
@@ -807,12 +805,16 @@

u2port0: usb-phy@1a1c4800 {
reg = <0 0x1a1c4800 0 0x0100>;
+ clocks = <&topckgen CLK_TOP_USB_PHY48M>;
+ clock-names = "ref";
#phy-cells = <1>;
status = "okay";
};

u3port0: usb-phy@1a1c4900 {
reg = <0 0x1a1c4900 0 0x0700>;
+ clocks = <&clk26m>;
+ clock-names = "ref";
#phy-cells = <1>;
status = "okay";
};
@@ -827,7 +829,7 @@
interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_LOW>;
clocks = <&hifsys CLK_HIFSYS_USB1PHY>,
<&topckgen CLK_TOP_ETHIF_SEL>;
- clock-names = "sys_ck", "free_ck";
+ clock-names = "sys_ck", "ref_ck";
power-domains = <&scpsys MT2701_POWER_DOMAIN_HIF>;
phys = <&u2port1 PHY_TYPE_USB2>, <&u3port1 PHY_TYPE_USB3>;
status = "disabled";
@@ -837,8 +839,6 @@
compatible = "mediatek,mt7623-u3phy",
"mediatek,mt2701-u3phy";
reg = <0 0x1a244000 0 0x0700>;
- clocks = <&clk26m>;
- clock-names = "u3phya_ref";
#address-cells = <2>;
#size-cells = <2>;
ranges;
@@ -846,12 +846,16 @@

u2port1: usb-phy@1a244800 {
reg = <0 0x1a244800 0 0x0100>;
+ clocks = <&topckgen CLK_TOP_USB_PHY48M>;
+ clock-names = "ref";
#phy-cells = <1>;
status = "okay";
};

u3port1: usb-phy@1a244900 {
reg = <0 0x1a244900 0 0x0700>;
+ clocks = <&clk26m>;
+ clock-names = "ref";
#phy-cells = <1>;
status = "okay";
};
--
1.9.1
\
 
 \ /
  Last update: 2017-10-22 17:37    [W:0.051 / U:0.156 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site