lkml.org 
[lkml]   [2017]   [Oct]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v3 05/10] arm: dts: mt7623: update pio, usb and crypto nodes
From
Date


On 10/20/2017 03:55 AM, Ryder Lee wrote:
> Hi
>
> On Thu, 2017-10-19 at 18:29 +0200, Matthias Brugger wrote:
>>
>> On 10/02/2017 03:54 AM, Ryder Lee wrote:
>>> This patch updates pio, usb and crypto nodes to make them be consistent
>>> with the binding documents.
>>>
>>> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
>>> ---
>>> arch/arm/boot/dts/mt7623.dtsi | 26 ++++++++++++++------------
>>> 1 file changed, 14 insertions(+), 12 deletions(-)
>>>
>>> diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
>>> index 381843e..0640fb7 100644
>>> --- a/arch/arm/boot/dts/mt7623.dtsi
>>> +++ b/arch/arm/boot/dts/mt7623.dtsi
>>> @@ -227,8 +227,7 @@
>>> };
>>>
>>> pio: pinctrl@10005000 {
>>> - compatible = "mediatek,mt7623-pinctrl",
>>> - "mediatek,mt2701-pinctrl";
>>> + compatible = "mediatek,mt7623-pinctrl";
>>
>> Looks good.
>>
>>> reg = <0 0x1000b000 0 0x1000>;
>>> mediatek,pctl-regmap = <&syscfg_pctl_a>;
>>> pins-are-numbered;
>>> @@ -680,7 +679,7 @@
>>> interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_LOW>;
>>> clocks = <&hifsys CLK_HIFSYS_USB0PHY>,
>>> <&topckgen CLK_TOP_ETHIF_SEL>;
>>> - clock-names = "sys_ck", "free_ck";
>>> + clock-names = "sys_ck", "ref_ck";
>>
>> This is already merged. Please rebase.
>
> I didn't see any changes in mt7623.dtsi.
>

You are right, sorry I didn't noticed this.

>>> power-domains = <&scpsys MT2701_POWER_DOMAIN_HIF>;
>>> phys = <&u2port0 PHY_TYPE_USB2>, <&u3port0 PHY_TYPE_USB3>;
>>> status = "disabled";
>>> @@ -690,8 +689,6 @@
>>> compatible = "mediatek,mt7623-u3phy",
>>> "mediatek,mt2701-u3phy";
>>> reg = <0 0x1a1c4000 0 0x0700>;
>>> - clocks = <&clk26m>;
>>> - clock-names = "u3phya_ref";
>>
>> Same here.
>>
>>> #address-cells = <2>;
>>> #size-cells = <2>;
>>> ranges;
>>> @@ -699,12 +696,16 @@
>>>
>>> u2port0: usb-phy@1a1c4800 {
>>> reg = <0 0x1a1c4800 0 0x0100>;
>>> + clocks = <&topckgen CLK_TOP_USB_PHY48M>;
>>> + clock-names = "ref";
>>
>> Same here.
>>
>>> #phy-cells = <1>;
>>> status = "okay";
>>> };
>>>
>>> u3port0: usb-phy@1a1c4900 {
>>> reg = <0 0x1a1c4900 0 0x0700>;
>>> + clocks = <&clk26m>;
>>> + clock-names = "ref";
>>
>> Same here.
>>
>>> #phy-cells = <1>;
>>> status = "okay";
>>> };
>>> @@ -719,7 +720,7 @@
>>> interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_LOW>;
>>> clocks = <&hifsys CLK_HIFSYS_USB1PHY>,
>>> <&topckgen CLK_TOP_ETHIF_SEL>;
>>> - clock-names = "sys_ck", "free_ck";
>>> + clock-names = "sys_ck", "ref_ck";
>>
>> Same here.
>>
>>> power-domains = <&scpsys MT2701_POWER_DOMAIN_HIF>;
>>> phys = <&u2port1 PHY_TYPE_USB2>, <&u3port1 PHY_TYPE_USB3>;
>>> status = "disabled";
>>> @@ -729,8 +730,6 @@
>>> compatible = "mediatek,mt7623-u3phy",
>>> "mediatek,mt2701-u3phy";
>>> reg = <0 0x1a244000 0 0x0700>;
>>> - clocks = <&clk26m>;
>>> - clock-names = "u3phya_ref";
>>
>> Same here.
>>
>>> #address-cells = <2>;
>>> #size-cells = <2>;
>>> ranges;
>>> @@ -738,12 +737,16 @@
>>>
>>> u2port1: usb-phy@1a244800 {
>>> reg = <0 0x1a244800 0 0x0100>;
>>> + clocks = <&topckgen CLK_TOP_USB_PHY48M>;
>>> + clock-names = "ref";
>>
>> Same here.
>>
>>> #phy-cells = <1>;
>>> status = "okay";
>>> };
>>>
>>> u3port1: usb-phy@1a244900 {
>>> reg = <0 0x1a244900 0 0x0700>;
>>> + clocks = <&clk26m>;
>>> + clock-names = "ref";
>>
>> Same here.
>>
>>> #phy-cells = <1>;
>>> status = "okay";
>>> };
>>> @@ -784,16 +787,15 @@
>>> };
>>>
>>> crypto: crypto@1b240000 {
>>> - compatible = "mediatek,mt7623-crypto";
>>> + compatible = "mediatek,eip97-crypto";
>>
>> Crypto node is not present in upstream.
>
> Crypto driver is already merged.
>

You are right, the node got added. I've overseen this as well :-\

After sleeping over this patch, I would prefer that you split it in three, one
for each device.
Thanks,
Matthias

\
 
 \ /
  Last update: 2017-10-22 17:35    [W:2.138 / U:0.044 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site