lkml.org 
[lkml]   [2017]   [Oct]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] Input: tca8418 - enable interrupt after it has been requested
On Mon, Oct 16, 2017 at 05:57:14PM -0400, Damien Riegel wrote:
> Currently, enabling keypad interrupts is one of the first operations
> done on the keypad, even before the interrupt is requested, so there is
> a small time window where the keypad can fire interrupts but the driver
> is not yet ready to handle them. It's fine for level interrupts because
> they will be handled anyway, but not so much for edge ones.
>
> This commit modifies and moves the function in charge of configuring the
> keypad. Enabling interrupts is now the last thing done on the keypad,
> and after the interrupt has been requested by the driver.
>
> Writing to the config register was also used to determine if the device
> was indeed present on the bus or not, this has been replaced by reading
> the lock/event count register to keep the same functionality.
>
> Signed-off-by: Damien Riegel <damien.riegel@savoirfairelinux.com>

Applied, thank you.

> ---
> I originally made this patch on top of:
>
> 800e3b9a6801 Input: drop owner assignment from i2c_driver
>
> But I only compile-tested it on top of input/next. The issue was spotted
> thanks to a bootloader that left the keypad configured, only with
> interrupts disabled. So any button pressed or released during Linux's
> boot was queued and triggered an interrupt as soon as the driver enabled
> interrupts. It would really be appreciated if someone could give this
> patch a try.
>
> drivers/input/keyboard/tca8418_keypad.c | 29 +++++++++++++++++------------
> 1 file changed, 17 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/input/keyboard/tca8418_keypad.c b/drivers/input/keyboard/tca8418_keypad.c
> index e37e335e406f..6da607d3b811 100644
> --- a/drivers/input/keyboard/tca8418_keypad.c
> +++ b/drivers/input/keyboard/tca8418_keypad.c
> @@ -234,14 +234,7 @@ static irqreturn_t tca8418_irq_handler(int irq, void *dev_id)
> static int tca8418_configure(struct tca8418_keypad *keypad_data,
> u32 rows, u32 cols)
> {
> - int reg, error;
> -
> - /* Write config register, if this fails assume device not present */
> - error = tca8418_write_byte(keypad_data, REG_CFG,
> - CFG_INT_CFG | CFG_OVR_FLOW_IEN | CFG_KE_IEN);
> - if (error < 0)
> - return -ENODEV;
> -
> + int reg, error = 0;
>
> /* Assemble a mask for row and column registers */
> reg = ~(~0 << rows);
> @@ -257,6 +250,12 @@ static int tca8418_configure(struct tca8418_keypad *keypad_data,
> error |= tca8418_write_byte(keypad_data, REG_DEBOUNCE_DIS2, reg >> 8);
> error |= tca8418_write_byte(keypad_data, REG_DEBOUNCE_DIS3, reg >> 16);
>
> + if (error)
> + return error;
> +
> + error = tca8418_write_byte(keypad_data, REG_CFG,
> + CFG_INT_CFG | CFG_OVR_FLOW_IEN | CFG_KE_IEN);
> +
> return error;
> }
>
> @@ -268,6 +267,7 @@ static int tca8418_keypad_probe(struct i2c_client *client,
> struct input_dev *input;
> u32 rows = 0, cols = 0;
> int error, row_shift, max_keys;
> + u8 reg;
>
> /* Check i2c driver capabilities */
> if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE)) {
> @@ -301,10 +301,10 @@ static int tca8418_keypad_probe(struct i2c_client *client,
> keypad_data->client = client;
> keypad_data->row_shift = row_shift;
>
> - /* Initialize the chip or fail if chip isn't present */
> - error = tca8418_configure(keypad_data, rows, cols);
> - if (error < 0)
> - return error;
> + /* Read key lock register, if this fails assume device not present */
> + error = tca8418_read_byte(keypad_data, REG_KEY_LCK_EC, &reg);
> + if (error)
> + return -ENODEV;
>
> /* Configure input device */
> input = devm_input_allocate_device(dev);
> @@ -340,6 +340,11 @@ static int tca8418_keypad_probe(struct i2c_client *client,
> return error;
> }
>
> + /* Initialize the chip */
> + error = tca8418_configure(keypad_data, rows, cols);
> + if (error < 0)
> + return error;
> +
> error = input_register_device(input);
> if (error) {
> dev_err(dev, "Unable to register input device, error: %d\n",
> --
> 2.14.2
>

--
Dmitry

\
 
 \ /
  Last update: 2017-10-22 17:30    [W:0.037 / U:0.092 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site