lkml.org 
[lkml]   [2017]   [Oct]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2] i2c: aspeed: Deassert reset in probe
Date
In order to use i2c from a cold boot, the i2c peripheral must be taken
out of reset. We request a shared reset controller each time a bus
driver is loaded, as the reset is shared between the 14 i2c buses.

On remove the reset is asserted, which only touches the hardware once
the last i2c bus is removed.

The request is optional, so if a device tree does not specify a reset
controller (or the driver is not built in), the driver continues to
probe.

Signed-off-by: Joel Stanley <joel@jms.id.au>
---
v2: Sort the headers

drivers/i2c/busses/i2c-aspeed.c | 8 ++++++++
1 file changed, 8 insertions(+)

diff --git a/drivers/i2c/busses/i2c-aspeed.c b/drivers/i2c/busses/i2c-aspeed.c
index 284f8670dbeb..a2006376322f 100644
--- a/drivers/i2c/busses/i2c-aspeed.c
+++ b/drivers/i2c/busses/i2c-aspeed.c
@@ -12,6 +12,7 @@

#include <linux/clk.h>
#include <linux/completion.h>
+#include <linux/delay.h>
#include <linux/err.h>
#include <linux/errno.h>
#include <linux/i2c.h>
@@ -27,6 +28,7 @@
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/platform_device.h>
+#include <linux/reset.h>
#include <linux/slab.h>

/* I2C Register */
@@ -132,6 +134,7 @@ struct aspeed_i2c_bus {
struct i2c_adapter adap;
struct device *dev;
void __iomem *base;
+ struct reset_control *rst;
/* Synchronizes I/O mem access to base. */
spinlock_t lock;
struct completion cmd_complete;
@@ -847,6 +850,9 @@ static int aspeed_i2c_probe_bus(struct platform_device *pdev)
/* We just need the clock rate, we don't actually use the clk object. */
devm_clk_put(&pdev->dev, parent_clk);

+ bus->rst = devm_reset_control_get_optional_shared(&pdev->dev, NULL);
+ reset_control_deassert(bus->rst);
+
ret = of_property_read_u32(pdev->dev.of_node,
"bus-frequency", &bus->bus_frequency);
if (ret < 0) {
@@ -919,6 +925,8 @@ static int aspeed_i2c_remove_bus(struct platform_device *pdev)

i2c_del_adapter(&bus->adap);

+ reset_control_assert(bus->rst);
+
return 0;
}

--
2.14.1
\
 
 \ /
  Last update: 2017-10-22 17:14    [W:0.052 / U:0.136 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site