lkml.org 
[lkml]   [2017]   [Oct]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 24/25] thermal/drivers/hisi: Add support for hi3660 SoC
On Tue, Oct 10, 2017 at 08:02:49PM +0200, Daniel Lezcano wrote:
> From: Kevin Wangtao <kevin.wangtao@linaro.org>
>
> This patch adds the support for thermal sensor on the Hi3660 SoC.
> Hi3660 tsensor support alarm interrupt and have three configurable
> alarm thresholds, it also has a configurable hysteresis interval,
> interrupt will be triggered when temperature rise above the alarm
> threshold or fall below the hysteresis threshold.

Minor:


CHECK: Alignment should match open parenthesis
#173: FILE: drivers/thermal/hisi_thermal.c:214:
+ writel(DIV_ROUND_UP(value, HI3660_TEMP_STEP) & 0x7F,
+ addr + HI3660_LAG(id));

total: 0 errors, 0 warnings, 1 checks, 205 lines checked

>
> Signed-off-by: Kevin Wangtao <kevin.wangtao@linaro.org>
> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
> ---
> drivers/thermal/hisi_thermal.c | 146 ++++++++++++++++++++++++++++++++++++++++-
> 1 file changed, 145 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/thermal/hisi_thermal.c b/drivers/thermal/hisi_thermal.c
> index e87ca6c..10276f0 100644
> --- a/drivers/thermal/hisi_thermal.c
> +++ b/drivers/thermal/hisi_thermal.c
> @@ -39,12 +39,24 @@
> #define HI6220_TEMP0_RST_MSK (0x1C)
> #define HI6220_TEMP0_VALUE (0x28)
>
> +#define HI3660_OFFSET(chan) ((chan) * 0x40)
> +#define HI3660_TEMP(chan) (HI3660_OFFSET(chan) + 0x1C)
> +#define HI3660_TH(chan) (HI3660_OFFSET(chan) + 0x20)
> +#define HI3660_LAG(chan) (HI3660_OFFSET(chan) + 0x28)
> +#define HI3660_INT_EN(chan) (HI3660_OFFSET(chan) + 0x2C)
> +#define HI3660_INT_CLR(chan) (HI3660_OFFSET(chan) + 0x30)
> +
> #define HI6220_TEMP_BASE (-60000)
> #define HI6220_TEMP_RESET (100000)
> #define HI6220_TEMP_STEP (785)
> #define HI6220_TEMP_LAG (3500)
>
> +#define HI3660_TEMP_BASE (-63780)
> +#define HI3660_TEMP_STEP (205)
> +#define HI3660_TEMP_LAG (4000)
> +
> #define HI6220_DEFAULT_SENSOR 2
> +#define HI3660_DEFAULT_SENSOR 1
>
> #define MAX_THRES_NUM 2
>
> @@ -96,6 +108,24 @@ static inline int hi6220_thermal_temp_to_step(int temp)
> }
>
> /*
> + * for Hi3660,
> + * Step: 189/922 (0.205)
> + * Temperature base: -63.780°C
> + *
> + * The register is programmed in temperature steps, every step is 205
> + * millidegree and begins at -63 780 m°C
> + */
> +static inline int hi3660_thermal_step_to_temp(int step)
> +{
> + return HI3660_TEMP_BASE + step * HI3660_TEMP_STEP;
> +}
> +
> +static inline int hi3660_thermal_temp_to_step(int temp)
> +{
> + return DIV_ROUND_UP(temp - HI3660_TEMP_BASE, HI3660_TEMP_STEP);
> +}
> +
> +/*
> * The lag register contains 5 bits encoding the temperature in steps.
> *
> * Each time the temperature crosses the threshold boundary, an
> @@ -169,6 +199,45 @@ static inline int hi6220_thermal_get_temperature(void __iomem *addr)
> }
>
> /*
> + * [0:6] lag register
> + *
> + * The temperature is coded in steps, cf. HI3660_TEMP_STEP.
> + *
> + * Min : 0x00 : 0.0 °C
> + * Max : 0x7F : 26.0 °C
> + *
> + */
> +static inline void hi3660_thermal_set_lag(void __iomem *addr,
> + int id, int value)
> +{
> + writel(DIV_ROUND_UP(value, HI3660_TEMP_STEP) & 0x7F,
> + addr + HI3660_LAG(id));
> +}
> +
> +static inline void hi3660_thermal_alarm_clear(void __iomem *addr,
> + int id, int value)
> +{
> + writel(value, addr + HI3660_INT_CLR(id));
> +}
> +
> +static inline void hi3660_thermal_alarm_enable(void __iomem *addr,
> + int id, int value)
> +{
> + writel(value, addr + HI3660_INT_EN(id));
> +}
> +
> +static inline void hi3660_thermal_alarm_set(void __iomem *addr,
> + int id, int value)
> +{
> + writel(value, addr + HI3660_TH(id));
> +}
> +
> +static inline int hi3660_thermal_get_temperature(void __iomem *addr, int id)
> +{
> + return hi3660_thermal_step_to_temp(readl(addr + HI3660_TEMP(id)));
> +}
> +
> +/*
> * Temperature configuration register - Sensor selection
> *
> * Bits [19:12]
> @@ -206,11 +275,22 @@ static int hi6220_thermal_irq_handler(struct hisi_thermal_data *data)
> return 0;
> }
>
> +static int hi3660_thermal_irq_handler(struct hisi_thermal_data *data)
> +{
> + hi3660_thermal_alarm_clear(data->regs, data->sensor.id, 1);
> + return 0;
> +}
> +
> static int hi6220_thermal_get_temp(struct hisi_thermal_data *data)
> {
> return hi6220_thermal_get_temperature(data->regs);
> }
>
> +static int hi3660_thermal_get_temp(struct hisi_thermal_data *data)
> +{
> + return hi3660_thermal_get_temperature(data->regs, data->sensor.id);
> +}
> +
> static int hi6220_thermal_disable_sensor(struct hisi_thermal_data *data)
> {
> /* disable sensor module */
> @@ -222,6 +302,13 @@ static int hi6220_thermal_disable_sensor(struct hisi_thermal_data *data)
> return 0;
> }
>
> +static int hi3660_thermal_disable_sensor(struct hisi_thermal_data *data)
> +{
> + /* disable sensor module */
> + hi3660_thermal_alarm_enable(data->regs, data->sensor.id, 0);
> + return 0;
> +}
> +
> static int hi6220_thermal_enable_sensor(struct hisi_thermal_data *data)
> {
> struct hisi_thermal_sensor *sensor = &data->sensor;
> @@ -260,6 +347,29 @@ static int hi6220_thermal_enable_sensor(struct hisi_thermal_data *data)
> return 0;
> }
>
> +static int hi3660_thermal_enable_sensor(struct hisi_thermal_data *data)
> +{
> + unsigned int value;
> + struct hisi_thermal_sensor *sensor = &data->sensor;
> +
> + /* disable interrupt */
> + hi3660_thermal_alarm_enable(data->regs, sensor->id, 0);
> +
> + /* setting lag value between current temp and the threshold */
> + hi3660_thermal_set_lag(data->regs, sensor->id, HI3660_TEMP_LAG);
> +
> + /* set interrupt threshold */
> + value = hi3660_thermal_temp_to_step(sensor->thres_temp[0]);
> + value |= hi3660_thermal_temp_to_step(sensor->thres_temp[1]) << 10;
> + hi3660_thermal_alarm_set(data->regs, sensor->id, value);
> +
> + /* enable interrupt */
> + hi3660_thermal_alarm_clear(data->regs, sensor->id, 1);
> + hi3660_thermal_alarm_enable(data->regs, sensor->id, 1);
> +
> + return 0;
> +}
> +
> static int hi6220_thermal_probe(struct hisi_thermal_data *data)
> {
> struct platform_device *pdev = data->pdev;
> @@ -296,6 +406,33 @@ static int hi6220_thermal_probe(struct hisi_thermal_data *data)
> return 0;
> }
>
> +static int hi3660_thermal_probe(struct hisi_thermal_data *data)
> +{
> + struct platform_device *pdev = data->pdev;
> + struct device *dev = &pdev->dev;
> + struct resource *res;
> +
> + data->get_temp = hi3660_thermal_get_temp;
> + data->enable_sensor = hi3660_thermal_enable_sensor;
> + data->disable_sensor = hi3660_thermal_disable_sensor;
> + data->irq_handler = hi3660_thermal_irq_handler;
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + data->regs = devm_ioremap_resource(dev, res);
> + if (IS_ERR(data->regs)) {
> + dev_err(dev, "failed to get io address\n");
> + return PTR_ERR(data->regs);
> + }
> +
> + data->irq = platform_get_irq(pdev, 0);
> + if (data->irq < 0)
> + return data->irq;
> +
> + data->sensor.id = HI3660_DEFAULT_SENSOR;
> +
> + return 0;
> +}
> +
>
> static int hisi_thermal_get_temp(void *__data, int *temp)
> {
> @@ -371,7 +508,14 @@ static int hisi_thermal_register_sensor(struct platform_device *pdev,
> }
>
> static const struct of_device_id of_hisi_thermal_match[] = {
> - { .compatible = "hisilicon,tsensor", .data = hi6220_thermal_probe },
> + {
> + .compatible = "hisilicon,tsensor",
> + .data = hi6220_thermal_probe
> + },
> + {
> + .compatible = "hisilicon,hi3660-tsensor",
> + .data = hi3660_thermal_probe
> + },
> { /* end */ }
> };
> MODULE_DEVICE_TABLE(of, of_hisi_thermal_match);
> --
> 2.7.4
>

\
 
 \ /
  Last update: 2017-10-17 06:40    [W:0.962 / U:0.956 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site