lkml.org 
[lkml]   [2017]   [Oct]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 4/4] KVM: LAPIC: Don't silently accept bad vectors
2017-10-13 19:36+0200, Radim Krčmář:
> 2017-10-13 09:17+0800, Wanpeng Li:
> > 2017-10-04 22:44 GMT+08:00 Radim Krčmář <rkrcmar@redhat.com>:
> > > 2017-10-04 22:16+0800, Wanpeng Li:
> > >> 2017-10-04 20:01 GMT+08:00 Radim Krčmář <rkrcmar@redhat.com>:
> > >> > 2017-10-04 15:56+0800, Wanpeng Li:
> > >> >> 2017-10-04 1:53 GMT+08:00 Radim Krčmář <rkrcmar@redhat.com>:
> > >> >> > 2017-09-28 18:04-0700, Wanpeng Li:
> > >> >> >> @@ -946,6 +965,11 @@ static int __apic_accept_irq(struct kvm_lapic *apic, int delivery_mode,
> > >> >> >> int result = 0;
> > >> >> >> struct kvm_vcpu *vcpu = apic->vcpu;
> > >> >> >>
> > >> >> >> + if (unlikely(vector < 16) && delivery_mode == APIC_DM_FIXED) {
> > >> >> >> + apic_error(apic, APIC_ESR_RECVILL);
> > >> >> >
> > >> >> > The error is also triggered if lowest priority is supported and tries to
> > >> >> > deliver an invalid vector.
> > >> >>
> > >> >> Could you point out this in SDM? :)
> > >> >
> > >> > In section 10.5.3 Error Handling:
> > >> >
> > >> > If the local APIC does not support the sending of lowest-priority IPIs
> > >> > and software writes the ICR to send a lowest-priority IPI with an
> > >> > illegal vector, the local APIC sets only the “redirectible IPI” error
> > >> > bit.
> > >> >
> > >> > Hence, if local APIC does support lowest-priority, then it throws the
> > >> > same error as fixed. (KVM does support lowest-priority.)
> > >>
> > >> Yeah, I read the section before but I misunderstand it. It seems that
> > >> the section means it just occurs when the local APIC does not support
> > >> the sending of lowest-priority IPIs?
> > >
> > > I think so.
> >
> > I see Virtualbox just captures Fixed delivery mode for error handling.
>
> Hm, it doesn't even inject an error on destination of the
> lowest-priority interrupt and just drop it?
>
> I can't interpret the SDM in any other way, though:
>
> When an interrupt vector in the range of 0 to 15 is sent or received
> through the local APIC, the APIC indicates an illegal vector in its
> Error Status Register (see Section 10.5.3, “Error Handling”).
>
> and we support lowest-priority interrupts, because if we didn't, then
>
> The interrupt is not processed and hence the “Send Illegal Vector” bit
> is not set in the ESR.
>
> I'll go for a quick bare-metal test ...

Turns out my machine doesn't support for lowest priority IPIs (probably
got killed with FSB), so all I get is error 0x10.

\
 
 \ /
  Last update: 2017-10-13 22:31    [W:1.611 / U:0.032 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site