lkml.org 
[lkml]   [2017]   [Oct]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 1/5] uio: dt-bindings: document existing binding for uio-pdrv-genirq
On Tue, Oct 10, 2017 at 11:46:51AM +1300, Chris Packham wrote:
> Document the device tree bindings for the uio-prv-genirq driver. Provide
> some examples on how it can be used.
>
> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
> ---
> Changes in v3:
> - New. Document existing binding first.
>
> .../devicetree/bindings/uio/uio-pdrv-genirq.txt | 27 ++++++++++++++++++++++
> 1 file changed, 27 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/uio/uio-pdrv-genirq.txt
>
> diff --git a/Documentation/devicetree/bindings/uio/uio-pdrv-genirq.txt b/Documentation/devicetree/bindings/uio/uio-pdrv-genirq.txt
> new file mode 100644
> index 000000000000..5a92b1f8825f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/uio/uio-pdrv-genirq.txt
> @@ -0,0 +1,27 @@
> +*Generic UIO platform driver with interrupts

This document is a how to use the UIO driver, not a DT binding. Using
UIO versus a proper kernel driver is purely a kernel decision that has
nothing to do with DT.

> +
> +Required properties:
> +- compatible: Should be a value set with the of_id module parameter.
> +
> +Optional properties:
> +- interrupts: Should contain the interrupt to be associated with this device
> + (only a single interrupt is supported per device).
> +- interrupt-parent: Specifies the phandle to the parent interrupt controller.
> +- reg: Should specify the physical address spaces used by this device.
> +
> +Example:
> +
> +/* Device with MM IO and interrupt assuming of_id="me,my-device" */
> +my-device@10000 {
> + compatible = "me,my-device";
> + reg = <0x10000 0x40>;
> + interrupts = <4 IRQ_TYPE_EDGE_BOTH>;
> + interrupt-parent = <&gic>;
> +};
> +
> +/* Device with interrupt only assuming of_id="me,my-device" */
> +my-int {
> + compatible = "me,my-device";
> + interrupts = <6 IRQ_TYPE_EDGE_BOTH>;
> + interrupt-parent = <&gic>;
> +};
> --
> 2.14.2
>

\
 
 \ /
  Last update: 2017-10-13 22:24    [W:0.060 / U:0.060 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site