lkml.org 
[lkml]   [2017]   [Oct]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 2/2] mfd: Add Spreadtrum SC27xx series PMICs driver
On 13 October 2017 at 18:13, Lee Jones <lee.jones@linaro.org> wrote:
> On Fri, 13 Oct 2017, Baolin Wang wrote:
>> On 13 October 2017 at 17:26, Lee Jones <lee.jones@linaro.org> wrote:
>> > On Wed, 11 Oct 2017, Baolin Wang wrote:
>> >
>> >> This patch adds support for Spreadtrum SC27xx series PMIC MFD core, and It
>> >> provides communication through the SPI interfaces. The SC27xx series PMICs
>> >> contains the following 6 major components:
>> >> - DCDCs
>> >> - LDOs
>> >> - Battery management system
>> >> - Audio codec
>> >> - User interface function, such as indicator, flash LED
>> >> - IC level function, such as power on/off, type-c
>> >>
>> >> Signed-off-by: Baolin Wang <baolin.wang@spreadtrum.com>
>> >> ---
>> >> drivers/mfd/Kconfig | 10 ++
>> >> drivers/mfd/Makefile | 1 +
>> >> drivers/mfd/sprd-sc27xx-spi.c | 273 +++++++++++++++++++++++++++++++++++++++++
>> >> 3 files changed, 284 insertions(+)
>> >> create mode 100644 drivers/mfd/sprd-sc27xx-spi.c
>> >>
>> >> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
>> >> index fc5e4fe..4753cd5 100644
>> >> --- a/drivers/mfd/Kconfig
>> >> +++ b/drivers/mfd/Kconfig
>> >> @@ -1057,6 +1057,16 @@ config MFD_SMSC
>> >> To compile this driver as a module, choose M here: the
>> >> module will be called smsc.
>> >>
>> >> +config MFD_SC27XX_PMIC
>> >> + tristate "Spreadtrum SC27xx PMICs"
>> >> + depends on ARCH_SPRD || COMPILE_TEST
>> >> + depends on SPI_MASTER
>> >> + select MFD_CORE
>> >> + select REGMAP_SPI
>> >> + select REGMAP_IRQ
>> >> + help
>> >> + This enables support for the Spreadtrum SC27xx PMICs.
>> >> +
>> >> config ABX500_CORE
>> >> bool "ST-Ericsson ABX500 Mixed Signal Circuit register functions"
>> >> default y if ARCH_U300 || ARCH_U8500 || COMPILE_TEST
>> >> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
>> >> index c3d0a1b..a377e0f 100644
>> >> --- a/drivers/mfd/Makefile
>> >> +++ b/drivers/mfd/Makefile
>> >> @@ -226,3 +226,4 @@ obj-$(CONFIG_MFD_SUN4I_GPADC) += sun4i-gpadc.o
>> >> obj-$(CONFIG_MFD_STM32_LPTIMER) += stm32-lptimer.o
>> >> obj-$(CONFIG_MFD_STM32_TIMERS) += stm32-timers.o
>> >> obj-$(CONFIG_MFD_MXS_LRADC) += mxs-lradc.o
>> >> +obj-$(CONFIG_MFD_SC27XX_PMIC) += sprd-sc27xx-spi.o
>> >> diff --git a/drivers/mfd/sprd-sc27xx-spi.c b/drivers/mfd/sprd-sc27xx-spi.c
>> >> new file mode 100644
>> >> index 0000000..2b3f2bc
>> >> --- /dev/null
>> >> +++ b/drivers/mfd/sprd-sc27xx-spi.c
>> >> @@ -0,0 +1,273 @@
>> >> +/*
>> >> + * Copyright (C) 2017 Spreadtrum Communications Inc.
>> >> + *
>> >> + * This software is licensed under the terms of the GNU General Public
>> >> + * License version 2, as published by the Free Software Foundation, and
>> >> + * may be copied, distributed, and modified under those terms.
>> >> + *
>> >> + * This program is distributed in the hope that it will be useful,
>> >> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> >> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> >> + * GNU General Public License for more details.
>> >> + */
>
> [...]
>
>> >> +static int sprd_pmic_spi_read(void *context,
>> >> + const void *reg, size_t reg_size,
>> >> + void *val, size_t val_size)
>> >> +{
>> >> + struct device *dev = context;
>> >> + struct spi_device *spi = to_spi_device(dev);
>> >> + u32 rx_buf[2] = { 0 };
>> >> + int ret;
>> >> +
>> >> + rx_buf[0] = *(u32 *)reg;
>> >> + ret = spi_read(spi, rx_buf, 1);
>> >> + if (ret < 0)
>> >> + return ret;
>> >> +
>> >> + memcpy(val, rx_buf, val_size);
>> >
>> > This looks like you're asking for trouble.
>> >
>> > What if val_size > sizeof(rx_buf)?
>> >
>> > You should probably check for that.
>>
>> Since we always read one register every time, which means the reg_size
>> and val_size are always 4. But it will be more helpful to check
>> incorrect parameters by adding one check here.
>>
>> >
>> >> + return 0;
>> >> +}
>> >> +
>> >> +static struct regmap_bus sprd_pmic_regmap = {
>> >> + .write = sprd_pmic_spi_write,
>> >> + .read = sprd_pmic_spi_read,
>> >> + .reg_format_endian_default = REGMAP_ENDIAN_NATIVE,
>> >> + .val_format_endian_default = REGMAP_ENDIAN_NATIVE,
>> >> +};
>> >> +
>> >> +static const struct regmap_config sprd_pmic_config = {
>> >> + .reg_bits = 32,
>> >> + .val_bits = 32,
>> >> + .reg_stride = 4,
>> >> + .max_register = 0xffff,
>> >> +};
>> >> +
>> >> +static int sprd_pmic_probe(struct spi_device *spi)
>> >> +{
>> >> + struct sprd_pmic *sprd_pmic;
>> >> + const struct sprd_pmic_data *data;
>> >> + int ret, i;
>> >> +
>> >> + data = of_device_get_match_data(&spi->dev);
>> >> + if (!data) {
>> >> + dev_err(&spi->dev, "No matching driver data found\n");
>> >> + return -EINVAL;
>> >> + }
>> >> +
>> >> + sprd_pmic = devm_kzalloc(&spi->dev, sizeof(*sprd_pmic), GFP_KERNEL);
>> >> + if (!sprd_pmic)
>> >> + return -ENOMEM;
>> >> +
>> >> + sprd_pmic->regmap = devm_regmap_init(&spi->dev, &sprd_pmic_regmap,
>> >> + &spi->dev, &sprd_pmic_config);
>> >> + if (IS_ERR(sprd_pmic->regmap)) {
>> >> + ret = PTR_ERR(sprd_pmic->regmap);
>> >> + dev_err(&spi->dev, "Failed to allocate register map %d\n", ret);
>> >> + return ret;
>> >> + }
>> >> +
>> >> + spi_set_drvdata(spi, sprd_pmic);
>> >> + sprd_pmic->dev = &spi->dev;
>> >> + sprd_pmic->irq = spi->irq;
>> >> +
>> >> + sprd_pmic->irq_chip.name = dev_name(&spi->dev);
>> >> + sprd_pmic->irq_chip.status_base =
>> >> + data->irq_base + SPRD_PMIC_INT_MASK_STATUS;
>> >> + sprd_pmic->irq_chip.mask_base = data->irq_base + SPRD_PMIC_INT_EN;
>> >> + sprd_pmic->irq_chip.ack_base = 0;
>> >> + sprd_pmic->irq_chip.num_regs = 1;
>> >> + sprd_pmic->irq_chip.num_irqs = data->num_irqs;
>> >> + sprd_pmic->irq_chip.mask_invert = true;
>> >> +
>> >> + sprd_pmic->irqs = devm_kzalloc(&spi->dev, sizeof(struct regmap_irq) *
>> >> + data->num_irqs, GFP_KERNEL);
>> >> + if (!sprd_pmic->irqs)
>> >> + return -ENOMEM;
>> >> +
>> >> + sprd_pmic->irq_chip.irqs = sprd_pmic->irqs;
>> >> + for (i = 0; i < data->num_irqs; i++) {
>> >> + sprd_pmic->irqs[i].reg_offset = i / data->num_irqs;
>> >> + sprd_pmic->irqs[i].mask = BIT(i % data->num_irqs);
>> >> + }
>> >
>> > Why don't you do this live, instead of pre-calculating?
>>
>> Since the SC27xx series PMICs have different interrupts number (such
>> as SC2731 has 16 interrupts and SC2720 has 6 interrupts).
>
> Right, so save num_irqs in your device data structure.

Yes. I will add some doc to describe why we need 'sprd_pmic_data'
structure as match data for different PMICs in this SC27xx series.

--
Baolin.wang
Best Regards

\
 
 \ /
  Last update: 2017-10-13 15:41    [W:0.066 / U:1.372 seconds]
©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site