lkml.org 
[lkml]   [2017]   [Oct]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subjecthard lock-up with 4.14 git
Date
Hi,

after some use (eg. compiling packages) the machine locks up hard. Magic
SysRq doesn't work.

I had trouble bisecting the offending commit. This is my third try. And
it points to 94b1b03b519b81c494900cb112aa00ed205cc2d9 "x86/mm: Rework
lazy TLB mode and TLB freshness tracking".

Does it make sense? It still locks up with master. Please let me know if
you need more infos. Please CC, as I am not subscribed.

Regards,

Prakash


PS: The log:

git bisect start
# good: [569dbb88e80deb68974ef6fdd6a13edb9d686261] Linux 4.13
git bisect good 569dbb88e80deb68974ef6fdd6a13edb9d686261
# bad: [2bd6bf03f4c1c59381d62c61d03f6cc3fe71f66e] Linux 4.14-rc1
git bisect bad 2bd6bf03f4c1c59381d62c61d03f6cc3fe71f66e
# bad: [aae3dbb4776e7916b6cd442d00159bea27a695c1] Merge
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
git bisect bad aae3dbb4776e7916b6cd442d00159bea27a695c1
# bad: [bf1d6b2c76eda86159519bf5c427b1fa8f51f733] Merge tag
'staging-4.14-rc1' of
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
git bisect bad bf1d6b2c76eda86159519bf5c427b1fa8f51f733
# good: [edc2988c548db05e33b921fed15821010bc74895] Merge branch 'linus'
into locking/core, to fix up conflicts
git bisect good edc2988c548db05e33b921fed15821010bc74895
# bad: [04759194dc447ff0b9ef35bc641ce3bb076c2930] Merge tag
'arm64-upstream' of
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
git bisect bad 04759194dc447ff0b9ef35bc641ce3bb076c2930
# good: [5f82e71a001d14824a7728ad9e49f6aea420f161] Merge branch
'locking-core-for-linus' of
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
git bisect good 5f82e71a001d14824a7728ad9e49f6aea420f161
# bad: [f57091767add2b79d76aac41b83b192d8ba1dce7] Merge branch
'x86-cache-for-linus' of
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
git bisect bad f57091767add2b79d76aac41b83b192d8ba1dce7
# bad: [dd90cccffc20a15d8e4c3ac8813f4b6a6cd4766f] Merge branch
'timers-core-for-linus' of
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
git bisect bad dd90cccffc20a15d8e4c3ac8813f4b6a6cd4766f
# bad: [e505371dd83963caae1a37ead9524e8d997341be] x86/boot: Add early
cmdline parsing for options with arguments
git bisect bad e505371dd83963caae1a37ead9524e8d997341be
# bad: [b9d05200bc12444c7778a49c9694d8382ed06aa8] x86/mm: Insure that
boot memory areas are mapped properly
git bisect bad b9d05200bc12444c7778a49c9694d8382ed06aa8
# bad: [f7750a79568788473c5e8092ee58a52248f34329] x86, mpparse,
x86/acpi, x86/PCI, x86/dmi, SFI: Use memremap() for RAM mappings
git bisect bad f7750a79568788473c5e8092ee58a52248f34329
# bad: [cba4671af7550e008f7a7835f06df0763825bf3e] x86/mm: Disable PCID
on 32-bit kernels
git bisect bad cba4671af7550e008f7a7835f06df0763825bf3e
# good: [b0579ade7cd82391360e959cc844e50a160e8a96] x86/mm: Track the
TLB's tlb_gen and update the flushing algorithm
git bisect good b0579ade7cd82391360e959cc844e50a160e8a96
# bad: [43858b4f25cf0adc5c2ca9cf5ce5fdf2532941e5] x86/mm: Stop calling
leave_mm() in idle code
git bisect bad 43858b4f25cf0adc5c2ca9cf5ce5fdf2532941e5
# bad: [94b1b03b519b81c494900cb112aa00ed205cc2d9] x86/mm: Rework lazy
TLB mode and TLB freshness tracking
git bisect bad 94b1b03b519b81c494900cb112aa00ed205cc2d9
# first bad commit: [94b1b03b519b81c494900cb112aa00ed205cc2d9] x86/mm:
Rework lazy TLB mode and TLB freshness tracking

processor : 0
vendor_id : AuthenticAMD
cpu family : 16
model : 5
model name : AMD Phenom(tm) II X4 840 Processor
stepping : 3
microcode : 0x10000c8
cpu MHz : 3201.034
cache size : 512 KB
physical id : 0
siblings : 4
core id : 0
cpu cores : 4
apicid : 0
initial apicid : 0
fpu : yes
fpu_exception : yes
cpuid level : 5
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc rep_good nopl nonstop_tsc cpuid extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt hw_pstate vmmcall npt lbrv svm_lock nrip_save
bugs : tlb_mmatch fxsave_leak sysret_ss_attrs null_seg amd_e400
bogomips : 6400.76
TLB size : 1024 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 48 bits physical, 48 bits virtual
power management: ts ttp tm stc 100mhzsteps hwpstate

processor : 1
vendor_id : AuthenticAMD
cpu family : 16
model : 5
model name : AMD Phenom(tm) II X4 840 Processor
stepping : 3
microcode : 0x10000c8
cpu MHz : 3201.034
cache size : 512 KB
physical id : 0
siblings : 4
core id : 1
cpu cores : 4
apicid : 1
initial apicid : 1
fpu : yes
fpu_exception : yes
cpuid level : 5
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc rep_good nopl nonstop_tsc cpuid extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt hw_pstate vmmcall npt lbrv svm_lock nrip_save
bugs : tlb_mmatch fxsave_leak sysret_ss_attrs null_seg amd_e400
bogomips : 6400.76
TLB size : 1024 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 48 bits physical, 48 bits virtual
power management: ts ttp tm stc 100mhzsteps hwpstate

processor : 2
vendor_id : AuthenticAMD
cpu family : 16
model : 5
model name : AMD Phenom(tm) II X4 840 Processor
stepping : 3
microcode : 0x10000c8
cpu MHz : 3201.034
cache size : 512 KB
physical id : 0
siblings : 4
core id : 3
cpu cores : 4
apicid : 2
initial apicid : 3
fpu : yes
fpu_exception : yes
cpuid level : 5
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc rep_good nopl nonstop_tsc cpuid extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt hw_pstate vmmcall npt lbrv svm_lock nrip_save
bugs : tlb_mmatch fxsave_leak sysret_ss_attrs null_seg amd_e400
bogomips : 6400.76
TLB size : 1024 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 48 bits physical, 48 bits virtual
power management: ts ttp tm stc 100mhzsteps hwpstate

processor : 3
vendor_id : AuthenticAMD
cpu family : 16
model : 5
model name : AMD Phenom(tm) II X4 840 Processor
stepping : 3
microcode : 0x10000c8
cpu MHz : 3201.034
cache size : 512 KB
physical id : 0
siblings : 4
core id : 2
cpu cores : 4
apicid : 3
initial apicid : 2
fpu : yes
fpu_exception : yes
cpuid level : 5
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc rep_good nopl nonstop_tsc cpuid extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt hw_pstate vmmcall npt lbrv svm_lock nrip_save
bugs : tlb_mmatch fxsave_leak sysret_ss_attrs null_seg amd_e400
bogomips : 6400.76
TLB size : 1024 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 48 bits physical, 48 bits virtual
power management: ts ttp tm stc 100mhzsteps hwpstate

radeon 1376256 30 - Live 0xffffffffa00b5000
i2c_algo_bit 16384 1 radeon, Live 0xffffffffa006c000
drm_kms_helper 110592 1 radeon, Live 0xffffffffa008e000
cfbfillrect 16384 1 drm_kms_helper, Live 0xffffffffa0052000
syscopyarea 16384 1 drm_kms_helper, Live 0xffffffffa004b000
cfbimgblt 16384 1 drm_kms_helper, Live 0xffffffffa0044000
sysfillrect 16384 1 drm_kms_helper, Live 0xffffffffa0087000
sysimgblt 16384 1 drm_kms_helper, Live 0xffffffffa0080000
fb_sys_fops 16384 1 drm_kms_helper, Live 0xffffffffa0079000
cfbcopyarea 16384 1 drm_kms_helper, Live 0xffffffffa0072000
ttm 73728 1 radeon, Live 0xffffffffa0057000
drm 274432 13 radeon,drm_kms_helper,ttm, Live 0xffffffffa0000000
00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] RS780 Host Bridge
Subsystem: ABIT Computer Corp. RS780 Host Bridge
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 64
Region 3: Memory at <ignored> (64-bit, non-prefetchable)
Capabilities: [c4] HyperTransport: Slave or Primary Interface
Command: BaseUnitID=0 UnitCnt=12 MastHost- DefDir- DUL-
Link Control 0: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn+ LSEn- ExtCTL- 64b-
Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn-
Revision ID: 3.00
Link Frequency 0: [b]
Link Error 0: <Prot- <Ovfl- <EOC- CTLTm-
Link Frequency Capability 0: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
Feature Capability: IsocFC- LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD-
Link Frequency 1: 200MHz
Link Error 1: <Prot- <Ovfl- <EOC- CTLTm-
Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- 500MHz- 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend-
Error Handling: PFlE- OFlE- PFE- OFE- EOCFE- RFE- CRCFE- SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE-
Prefetchable memory behind bridge Upper: 00-00
Bus Number: 00
Capabilities: [54] HyperTransport: UnitID Clumping
Capabilities: [40] HyperTransport: Retry Mode
Capabilities: [9c] HyperTransport: #1a
Capabilities: [f8] HyperTransport: #1c

00:02.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] RS780 PCI to PCI bridge (ext gfx port 0) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000e000-0000efff [size=4K]
Memory behind bridge: fdd00000-fddfffff [size=1M]
Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff [size=256M]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag+ RBE+
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 5GT/s, Width x16, ASPM L0s L1, Exit Latency L0s <64ns, L1 <1us
ClockPM- Surprise- LLActRep+ BwNot+ ASPMOptComp-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt+
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
Slot #2, PowerLimit 75.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+ LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible+
RootCap: CRSVisible+
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Not Supported, TimeoutDis-, LTR-, OBFF Not Supported ARIFwd-
AtomicOpsCap: Routing- 32bit- 64bit- 128bitCAS-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd-
AtomicOpsCtl: ReqEn- EgressBlck-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: fee0f00c Data: 41b1
Capabilities: [b0] Subsystem: ABIT Computer Corp. RS780 PCI to PCI bridge (ext gfx port 0)
Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
Capabilities: [110 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
Status: NegoPending- InProgress-
Kernel driver in use: pcieport

00:09.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] RS780/RS880 PCI to PCI bridge (PCIE port 4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000d000-0000dfff [size=4K]
Memory behind bridge: fdc00000-fdcfffff [size=1M]
Prefetchable memory behind bridge: 00000000fdb00000-00000000fdbfffff [size=1M]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag+ RBE+
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <64ns, L1 <1us
ClockPM- Surprise- LLActRep+ BwNot+ ASPMOptComp-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
Slot #9, PowerLimit 25.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+ LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible+
RootCap: CRSVisible+
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Not Supported, TimeoutDis-, LTR-, OBFF Not Supported ARIFwd-
AtomicOpsCap: Routing- 32bit- 64bit- 128bitCAS-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd-
AtomicOpsCtl: ReqEn- EgressBlck-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: fee0f00c Data: 41d1
Capabilities: [b0] Subsystem: ABIT Computer Corp. RS780/RS880 PCI to PCI bridge (PCIE port 4)
Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
Capabilities: [110 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
Status: NegoPending- InProgress-
Kernel driver in use: pcieport

00:0a.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] RS780/RS880 PCI to PCI bridge (PCIE port 5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000c000-0000cfff [size=4K]
Memory behind bridge: fdf00000-fdffffff [size=1M]
Prefetchable memory behind bridge: 00000000fde00000-00000000fdefffff [size=1M]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag+ RBE+
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #1, Speed 5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <64ns, L1 <1us
ClockPM- Surprise- LLActRep+ BwNot+ ASPMOptComp-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
Slot #10, PowerLimit 25.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+ LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible+
RootCap: CRSVisible+
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Not Supported, TimeoutDis-, LTR-, OBFF Not Supported ARIFwd-
AtomicOpsCap: Routing- 32bit- 64bit- 128bitCAS-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd-
AtomicOpsCtl: ReqEn- EgressBlck-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: fee0f00c Data: 41e1
Capabilities: [b0] Subsystem: ABIT Computer Corp. RS780/RS880 PCI to PCI bridge (PCIE port 5)
Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
Capabilities: [110 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
Status: NegoPending- InProgress-
Kernel driver in use: pcieport

00:11.0 SATA controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] (prog-if 01 [AHCI 1.0])
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 96, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 24
Region 0: I/O ports at ff00 [size=8]
Region 1: I/O ports at fe00 [size=4]
Region 2: I/O ports at fd00 [size=8]
Region 3: I/O ports at fc00 [size=4]
Region 4: I/O ports at fb00 [size=16]
Region 5: Memory at fe02f000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] MSI: Enable+ Count=1/4 Maskable- 64bit+
Address: 00000000fee0f00c Data: 4142
Capabilities: [70] SATA HBA v1.0 InCfgSpace
Kernel driver in use: ahci

00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller (prog-if 10 [OHCI])
Subsystem: ABIT Computer Corp. SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fe02e000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci

00:12.1 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0 USB OHCI1 Controller (prog-if 10 [OHCI])
Subsystem: ABIT Computer Corp. SB7x0 USB OHCI1 Controller
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fe02d000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci

00:12.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller (prog-if 20 [EHCI])
Subsystem: ABIT Computer Corp. SB7x0/SB8x0/SB9x0 USB EHCI Controller
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at fe02c000 (32-bit, non-prefetchable) [size=256]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Bridge: PM- B3+
Capabilities: [e4] Debug port: BAR=1 offset=00e0
Kernel driver in use: ehci-pci

00:13.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller (prog-if 10 [OHCI])
Subsystem: ABIT Computer Corp. SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fe02b000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci

00:13.1 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0 USB OHCI1 Controller (prog-if 10 [OHCI])
Subsystem: ABIT Computer Corp. SB7x0 USB OHCI1 Controller
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fe02a000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci

00:13.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller (prog-if 20 [EHCI])
Subsystem: ABIT Computer Corp. SB7x0/SB8x0/SB9x0 USB EHCI Controller
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 19
Region 0: Memory at fe029000 (32-bit, non-prefetchable) [size=256]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Bridge: PM- B3+
Capabilities: [e4] Debug port: BAR=1 offset=00e0
Kernel driver in use: ehci-pci

00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus Controller (rev 3a)
Subsystem: ABIT Computer Corp. SBx00 SMBus Controller
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort+ <MAbort- >SERR+ <PERR+ INTx-
Capabilities: [b0] HyperTransport: MSI Mapping Enable- Fixed+

00:14.1 IDE interface: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 IDE Controller (prog-if 8a [Master SecP PriP])
Subsystem: ABIT Computer Corp. SB7x0/SB8x0/SB9x0 IDE Controller
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374
Region 4: I/O ports at fa00 [size=16]
Capabilities: [70] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: 00000000 Data: 0000
Kernel driver in use: pata_atiixp

00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 Azalia (Intel HDA)
Subsystem: ABIT Computer Corp. SBx00 Azalia (Intel HDA)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fe024000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: snd_hda_intel

00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 LPC host controller
Subsystem: ABIT Computer Corp. SB7x0/SB8x0/SB9x0 LPC host controller
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0

00:14.4 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 PCI to PCI Bridge (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+ ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=04, subordinate=04, sec-latency=64
I/O behind bridge: 0000b000-0000bfff [size=4K]
Memory behind bridge: fda00000-fdafffff [size=1M]
Prefetchable memory behind bridge: fd900000-fd9fffff [size=1M]
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-

00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor HyperTransport Configuration
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [80] HyperTransport: Host or Secondary Interface
Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ Slave- <EOCErr- DUL-
Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn+ LSEn+ ExtCTL- 64b-
Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
Revision ID: 3.00
Link Frequency: [b]
Link Error: <Prot- <Ovfl- <EOC- CTLTm-
Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz+ 1.4GHz- 1.6GHz- Vend-
Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA+ UIDRD- ExtRS- UCnfE-

00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Address Map
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor DRAM Controller
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Miscellaneous Control
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [f0] Secure device <?>
Kernel driver in use: k10temp

00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Link Control
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Barts PRO [Radeon HD 6850] (prog-if 00 [VGA controller])
Subsystem: PC Partner Limited / Sapphire Technology Barts PRO [Radeon HD 6850]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 28
Region 0: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 2: Memory at fddc0000 (64-bit, non-prefetchable) [size=128K]
Region 4: I/O ports at ee00 [size=256]
[virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v2) Legacy Endpoint, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend-
LnkCap: Port #0, Speed 5GT/s, Width x16, ASPM L0s L1, Exit Latency L0s <64ns, L1 <1us
ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Not Supported, TimeoutDis-, LTR-, OBFF Not Supported
AtomicOpsCap: 32bit- 64bit- 128bitCAS-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
AtomicOpsCtl: ReqEn-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee0f00c Data: 41a2
Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
Capabilities: [150 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, ECRCGenCap+ ECRCGenEn- ECRCChkCap+ ECRCChkEn-
MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
HeaderLog: 00000000 00000000 00000000 00000000
Kernel driver in use: radeon
Kernel modules: radeon

01:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Barts HDMI Audio [Radeon HD 6790/6850/6870 / 7720 OEM]
Subsystem: PC Partner Limited / Sapphire Technology Barts HDMI Audio [Radeon HD 6790/6850/6870 / 7720 OEM]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 27
Region 0: Memory at fddfc000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v2) Legacy Endpoint, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend-
LnkCap: Port #0, Speed 5GT/s, Width x16, ASPM L0s L1, Exit Latency L0s <64ns, L1 <1us
ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Not Supported, TimeoutDis-, LTR-, OBFF Not Supported
AtomicOpsCap: 32bit- 64bit- 128bitCAS-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
AtomicOpsCtl: ReqEn-
LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee0f00c Data: 4192
Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
Capabilities: [150 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, ECRCGenCap+ ECRCGenEn- ECRCChkCap+ ECRCChkEn-
MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
HeaderLog: 00000000 00000000 00000000 00000000
Kernel driver in use: snd_hda_intel

02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 01)
Subsystem: Realtek Semiconductor Co., Ltd. RTL8111/8168 PCI Express Gigabit Ethernet controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 26
Region 0: I/O ports at de00 [size=256]
Region 2: Memory at fdcff000 (64-bit, non-prefetchable) [size=4K]
[virtual] Expansion ROM at fdc00000 [disabled] [size=128K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [48] Vital Product Data
Not readable
Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+
Address: 00000000fee0f00c Data: 4172
Capabilities: [60] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 1024 bytes, PhantFunc 0, Latency L0s <1us, L1 unlimited
ExtTag+ AttnBtn+ AttnInd+ PwrInd+ RBE- FLReset- SlotPowerLimit 0.000W
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 4096 bytes
DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x4, ASPM L0s, Exit Latency L0s unlimited
ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [84] Vendor Specific Information: Len=4c <?>
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
AERCap: First Error Pointer: 14, ECRCGenCap- ECRCGenEn- ECRCChkCap- ECRCChkEn-
MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
HeaderLog: 00000000 00000000 00000000 00000000
Capabilities: [12c v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
Status: NegoPending- InProgress-
Capabilities: [148 v1] Device Serial Number 45-12-00-00-10-ec-81-68
Capabilities: [154 v1] Power Budgeting <?>
Kernel driver in use: r8169

03:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8056 PCI-E Gigabit Ethernet Controller (rev 14)
Subsystem: ABIT Computer Corp. 88E8056 PCI-E Gigabit Ethernet Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 25
Region 0: Memory at fdffc000 (64-bit, non-prefetchable) [size=16K]
Region 2: I/O ports at ce00 [size=256]
[virtual] Expansion ROM at fdf00000 [disabled] [size=128K]
Capabilities: [48] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [50] Vital Product Data
Product Name: Marvell Yukon 88E8056 Gigabit Ethernet Controller
Read-only fields:
[PN] Part number: Yukon 88E8056
[EC] Engineering changes: Rev. 1.4
[MN] Manufacture ID: 4d 61 72 76 65 6c 6c
[SN] Serial number: AbCdEfG0439C2
[CP] Extended capability: 01 10 cc 03
[RV] Reserved: checksum good, 9 byte(s) reserved
Read/write fields:
[RW] Read-write area: 121 byte(s) free
End
Capabilities: [5c] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee0f00c Data: 4162
Capabilities: [e0] Express (v1) Legacy Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <256ns, L1 unlimited
ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp-
LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 1f, ECRCGenCap- ECRCGenEn- ECRCChkCap- ECRCChkEn-
MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
HeaderLog: 00000000 00000000 00000000 00000000
Kernel driver in use: sky2

[ 0.000000] Linux version 4.13.0+ (light@graviton) (gcc version 6.4.0 (Gentoo 6.4.0 p1.0)) #683 SMP Sun Oct 8 15:06:09 CEST 2017
[ 0.000000] Command line: root=/dev/sda4 init=/usr/lib/systemd/systemd lpj=3200383 radeon.modeset=1 radeon.dpm=1 radeon.dynclks=1 snd-hda-intel.enable_msi=1 quiet rootfstype=ext4
[ 0.000000] x86/fpu: x87 FPU will use FXSAVE
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x00000000000977ff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000097800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cff80fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cffe0000-0x00000000cffe2fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cffe3000-0x00000000cffeffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000cfff0000-0x00000000cfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000012fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] random: fast init done
[ 0.000000] SMBIOS 2.5 present.
[ 0.000000] DMI: . ./A-S78H(RS780+SB700), BIOS 6.00 PG 12/19/2008
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x130000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back
[ 0.000000] 3 base 000100000000 mask FFFFE0000000 write-back
[ 0.000000] 4 base 000120000000 mask FFFFF0000000 write-back
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000130000000 aka 4864M
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000000] e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xcff81 max_arch_pfn = 0x400000000
[ 0.000000] Base memory trampoline at [ffff880000091000] 91000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x01e11000, 0x01e11fff] PGTABLE
[ 0.000000] BRK [0x01e12000, 0x01e12fff] PGTABLE
[ 0.000000] BRK [0x01e13000, 0x01e13fff] PGTABLE
[ 0.000000] BRK [0x01e14000, 0x01e14fff] PGTABLE
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F8360 000024 (v02 RS780 )
[ 0.000000] ACPI: XSDT 0x00000000CFFE3080 00004C (v01 RS780 AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: FACP 0x00000000CFFE9E00 0000F4 (v03 RS780 AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm1aEventBlock: 32/8 (20170531/tbfadt-603)
[ 0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm1aControlBlock: 16/8 (20170531/tbfadt-603)
[ 0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/PmTimerBlock: 32/8 (20170531/tbfadt-603)
[ 0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 64/8 (20170531/tbfadt-603)
[ 0.000000] ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aEventBlock: 8, using default 32 (20170531/tbfadt-708)
[ 0.000000] ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aControlBlock: 8, using default 16 (20170531/tbfadt-708)
[ 0.000000] ACPI BIOS Warning (bug): Invalid length for FADT/PmTimerBlock: 8, using default 32 (20170531/tbfadt-708)
[ 0.000000] ACPI: DSDT 0x00000000CFFE3200 006BC7 (v01 RS780 AWRDACPI 00001000 MSFT 03000000)
[ 0.000000] ACPI: FACS 0x00000000CFFE0000 000040
[ 0.000000] ACPI: FACS 0x00000000CFFE0000 000040
[ 0.000000] ACPI: SSDT 0x00000000CFFE9FC0 00088C (v01 PTLTD POWERNOW 00000001 LTP 00000001)
[ 0.000000] ACPI: HPET 0x00000000CFFEA880 000038 (v01 RS780 AWRDACPI 42302E31 AWRD 00000098)
[ 0.000000] ACPI: MCFG 0x00000000CFFEA8C0 00003C (v01 RS780 AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: APIC 0x00000000CFFE9F00 000084 (v01 RS780 AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000012fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000096fff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000cff80fff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000012fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000012fffffff]
[ 0.000000] On node 0 totalpages: 1048343
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3990 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 13247 pages used for memmap
[ 0.000000] DMA32 zone: 847745 pages, LIFO batch:31
[ 0.000000] Normal zone: 3072 pages used for memmap
[ 0.000000] Normal zone: 196608 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] e820: [mem 0xd0000000-0xdfffffff] available for PCI devices
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.000000] setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] percpu: Embedded 35 pages/cpu @ffff88012fc00000 s105240 r8192 d29928 u524288
[ 0.000000] pcpu-alloc: s105240 r8192 d29928 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1031939
[ 0.000000] Kernel command line: root=/dev/sda4 init=/usr/lib/systemd/systemd lpj=3200383 radeon.modeset=1 radeon.dpm=1 radeon.dynclks=1 snd-hda-intel.enable_msi=1 quiet rootfstype=ext4
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] AGP: Node 0: aperture [bus addr 0xc4000000-0xc5ffffff] (32MB)
[ 0.000000] Aperture pointing to e820 RAM. Ignoring.
[ 0.000000] AGP: Your BIOS doesn't leave an aperture memory hole
[ 0.000000] AGP: Please enable the IOMMU option in the BIOS setup
[ 0.000000] AGP: This costs you 64MB of RAM
[ 0.000000] AGP: Mapping aperture over RAM [mem 0xc4000000-0xc7ffffff] (65536KB)
[ 0.000000] Memory: 3975064K/4193372K available (7011K kernel code, 720K rwdata, 2344K rodata, 852K init, 440K bss, 218308K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133481069984 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.001000] tsc: Detected 3200.561 MHz processor
[ 0.001000] Calibrating delay loop (skipped) preset value.. 6400.76 BogoMIPS (lpj=3200383)
[ 0.001000] pid_max: default: 32768 minimum: 301
[ 0.001000] ACPI: Core revision 20170531
[ 0.009656] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.009754] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.009781] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.010175] CPU: Physical Processor ID: 0
[ 0.010177] CPU: Processor Core ID: 0
[ 0.010179] mce: CPU supports 6 MCE banks
[ 0.010189] LVT offset 0 assigned for vector 0xf9
[ 0.010196] process: using AMD E400 aware idle routine
[ 0.010199] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
[ 0.010202] Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
[ 0.010471] Freeing SMP alternatives memory: 36K
[ 0.011160] smpboot: Max logical packages: 1
[ 0.011782] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.022000] smpboot: CPU0: AMD Phenom(tm) II X4 840 Processor (family: 0x10, model: 0x5, stepping: 0x3)
[ 0.022000] Performance Events: AMD PMU driver.
[ 0.022000] ... version: 0
[ 0.022000] ... bit width: 48
[ 0.022000] ... generic registers: 4
[ 0.022000] ... value mask: 0000ffffffffffff
[ 0.022000] ... max period: 00007fffffffffff
[ 0.022000] ... fixed-purpose events: 0
[ 0.022000] ... event mask: 000000000000000f
[ 0.022000] Hierarchical SRCU implementation.
[ 0.022568] smp: Bringing up secondary CPUs ...
[ 0.022734] x86: Booting SMP configuration:
[ 0.022737] .... node #0, CPUs: #1 #2 #3
[ 0.027057] smp: Brought up 1 node, 4 CPUs
[ 0.027057] smpboot: Total of 4 processors activated (25603.06 BogoMIPS)
[ 0.028391] devtmpfs: initialized
[ 0.029433] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.029433] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.029433] xor: measuring software checksum speed
[ 0.039005] prefetch64-sse: 3864.000 MB/sec
[ 0.049004] generic_sse: 3632.000 MB/sec
[ 0.049008] xor: using function: prefetch64-sse (3864.000 MB/sec)
[ 0.049128] NET: Registered protocol family 16
[ 0.049586] cpuidle: using governor ladder
[ 0.049586] cpuidle: using governor menu
[ 0.049586] PCCT header not found.
[ 0.049586] node 0 link 0: io port [b000, ffff]
[ 0.049586] TOM: 00000000d0000000 aka 3328M
[ 0.049586] Fam 10h mmconf [mem 0xe0000000-0xe00fffff]
[ 0.049586] node 0 link 0: mmio [a0000, bffff]
[ 0.049586] node 0 link 0: mmio [d0000000, dfffffff]
[ 0.049586] node 0 link 0: mmio [f0000000, fe02ffff]
[ 0.049586] node 0 link 0: mmio [e0000000, e04fffff] ==> [e0100000, e04fffff]
[ 0.049586] TOM2: 0000000130000000 aka 4864M
[ 0.049586] bus: [bus 00-04] on node 0 link 0
[ 0.049586] bus: 00 [io 0x0000-0xffff]
[ 0.049586] bus: 00 [mem 0x000a0000-0x000bffff]
[ 0.049586] bus: 00 [mem 0xd0000000-0xdfffffff]
[ 0.049586] bus: 00 [mem 0xe0500000-0xffffffff]
[ 0.049586] bus: 00 [mem 0xe0100000-0xe04fffff]
[ 0.049586] bus: 00 [mem 0x130000000-0xfcffffffff]
[ 0.050258] ACPI: bus type PCI registered
[ 0.050391] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.050396] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.050432] PCI: Using configuration type 1 for base access
[ 0.055023] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.072024] raid6: sse2x1 gen() 1171 MB/s
[ 0.089028] raid6: sse2x1 xor() 1082 MB/s
[ 0.106009] raid6: sse2x2 gen() 2027 MB/s
[ 0.123009] raid6: sse2x2 xor() 1800 MB/s
[ 0.140004] raid6: sse2x4 gen() 2410 MB/s
[ 0.157027] raid6: sse2x4 xor() 1173 MB/s
[ 0.157029] raid6: using algorithm sse2x4 gen() 2410 MB/s
[ 0.157031] raid6: .... xor() 1173 MB/s, rmw enabled
[ 0.157034] raid6: using intx1 recovery algorithm
[ 0.157140] ACPI: Added _OSI(Module Device)
[ 0.157142] ACPI: Added _OSI(Processor Device)
[ 0.157144] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.157146] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.168692] ACPI: Interpreter enabled
[ 0.168707] ACPI: (supports S0 S5)
[ 0.168711] ACPI: Using IOAPIC for interrupt routing
[ 0.168895] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.183926] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.183939] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.183950] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.184285] PCI host bridge to bus 0000:00
[ 0.184291] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.184296] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.184301] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.184306] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[ 0.184310] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xffffffff window]
[ 0.184315] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.184335] pci 0000:00:00.0: [1022:9600] type 00 class 0x060000
[ 0.184358] pci 0000:00:00.0: [Firmware Bug]: reg 0x1c: invalid BAR (can't size)
[ 0.184611] pci 0000:00:02.0: [1022:9603] type 01 class 0x060400
[ 0.184679] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.184909] pci 0000:00:09.0: [1022:9608] type 01 class 0x060400
[ 0.184971] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
[ 0.185162] pci 0000:00:0a.0: [1022:9609] type 01 class 0x060400
[ 0.185224] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[ 0.185444] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
[ 0.185474] pci 0000:00:11.0: reg 0x10: [io 0xff00-0xff07]
[ 0.185487] pci 0000:00:11.0: reg 0x14: [io 0xfe00-0xfe03]
[ 0.185500] pci 0000:00:11.0: reg 0x18: [io 0xfd00-0xfd07]
[ 0.185513] pci 0000:00:11.0: reg 0x1c: [io 0xfc00-0xfc03]
[ 0.185525] pci 0000:00:11.0: reg 0x20: [io 0xfb00-0xfb0f]
[ 0.185539] pci 0000:00:11.0: reg 0x24: [mem 0xfe02f000-0xfe02f3ff]
[ 0.185803] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[ 0.185826] pci 0000:00:12.0: reg 0x10: [mem 0xfe02e000-0xfe02efff]
[ 0.186102] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310
[ 0.186127] pci 0000:00:12.1: reg 0x10: [mem 0xfe02d000-0xfe02dfff]
[ 0.186398] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[ 0.186426] pci 0000:00:12.2: reg 0x10: [mem 0xfe02c000-0xfe02c0ff]
[ 0.186524] pci 0000:00:12.2: supports D1 D2
[ 0.186528] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.186702] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[ 0.186726] pci 0000:00:13.0: reg 0x10: [mem 0xfe02b000-0xfe02bfff]
[ 0.186997] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310
[ 0.187027] pci 0000:00:13.1: reg 0x10: [mem 0xfe02a000-0xfe02afff]
[ 0.187300] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[ 0.187327] pci 0000:00:13.2: reg 0x10: [mem 0xfe029000-0xfe0290ff]
[ 0.187425] pci 0000:00:13.2: supports D1 D2
[ 0.187428] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.187624] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[ 0.187930] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
[ 0.187956] pci 0000:00:14.1: reg 0x10: [io 0x0000-0x0007]
[ 0.187969] pci 0000:00:14.1: reg 0x14: [io 0x0000-0x0003]
[ 0.187981] pci 0000:00:14.1: reg 0x18: [io 0x0000-0x0007]
[ 0.187993] pci 0000:00:14.1: reg 0x1c: [io 0x0000-0x0003]
[ 0.188014] pci 0000:00:14.1: reg 0x20: [io 0xfa00-0xfa0f]
[ 0.188039] pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.188043] pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.188047] pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.188050] pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.188287] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[ 0.188319] pci 0000:00:14.2: reg 0x10: [mem 0xfe024000-0xfe027fff 64bit]
[ 0.188402] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.188606] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[ 0.188893] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[ 0.189124] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
[ 0.189305] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
[ 0.189479] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
[ 0.189652] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
[ 0.189831] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
[ 0.190128] pci 0000:01:00.0: [1002:6739] type 00 class 0x030000
[ 0.190158] pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.190174] pci 0000:01:00.0: reg 0x18: [mem 0xfddc0000-0xfdddffff 64bit]
[ 0.190186] pci 0000:01:00.0: reg 0x20: [io 0xee00-0xeeff]
[ 0.190205] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[ 0.190265] pci 0000:01:00.0: supports D1 D2
[ 0.190354] pci 0000:01:00.1: [1002:aa88] type 00 class 0x040300
[ 0.190384] pci 0000:01:00.1: reg 0x10: [mem 0xfddfc000-0xfddfffff 64bit]
[ 0.190477] pci 0000:01:00.1: supports D1 D2
[ 0.193064] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.193074] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
[ 0.193079] pci 0000:00:02.0: bridge window [mem 0xfdd00000-0xfddfffff]
[ 0.193086] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.193213] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[ 0.193249] pci 0000:02:00.0: reg 0x10: [io 0xde00-0xdeff]
[ 0.193283] pci 0000:02:00.0: reg 0x18: [mem 0xfdcff000-0xfdcfffff 64bit]
[ 0.193320] pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[ 0.193428] pci 0000:02:00.0: supports D1 D2
[ 0.193432] pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.193528] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.193542] pci 0000:00:09.0: PCI bridge to [bus 02]
[ 0.193548] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff]
[ 0.193553] pci 0000:00:09.0: bridge window [mem 0xfdc00000-0xfdcfffff]
[ 0.193559] pci 0000:00:09.0: bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref]
[ 0.193635] pci 0000:03:00.0: [11ab:4364] type 00 class 0x020000
[ 0.193666] pci 0000:03:00.0: reg 0x10: [mem 0xfdffc000-0xfdffffff 64bit]
[ 0.193679] pci 0000:03:00.0: reg 0x18: [io 0xce00-0xceff]
[ 0.193717] pci 0000:03:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[ 0.193783] pci 0000:03:00.0: supports D1 D2
[ 0.193787] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.196057] pci 0000:00:0a.0: PCI bridge to [bus 03]
[ 0.196066] pci 0000:00:0a.0: bridge window [io 0xc000-0xcfff]
[ 0.196071] pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff]
[ 0.196077] pci 0000:00:0a.0: bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
[ 0.196266] pci 0000:00:14.4: PCI bridge to [bus 04] (subtractive decode)
[ 0.196273] pci 0000:00:14.4: bridge window [io 0xb000-0xbfff]
[ 0.196279] pci 0000:00:14.4: bridge window [mem 0xfda00000-0xfdafffff]
[ 0.196286] pci 0000:00:14.4: bridge window [mem 0xfd900000-0xfd9fffff pref]
[ 0.196291] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.196295] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.196300] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.196303] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
[ 0.196307] pci 0000:00:14.4: bridge window [mem 0xd0000000-0xffffffff window] (subtractive decode)
[ 0.196334] pci_bus 0000:00: on NUMA node 0
[ 0.197181] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.197384] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.197539] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.197658] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.197809] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.197960] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.198117] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.198269] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.199909] ACPI: Enabled 1 GPEs in block 00 to 1F
[ 0.200089] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[ 0.200089] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.200089] pci 0000:01:00.0: vgaarb: bridge control possible
[ 0.200089] vgaarb: loaded
[ 0.200227] SCSI subsystem initialized
[ 0.200257] libata version 3.00 loaded.
[ 0.200257] ACPI: bus type USB registered
[ 0.200257] usbcore: registered new interface driver usbfs
[ 0.200257] usbcore: registered new interface driver hub
[ 0.200257] usbcore: registered new device driver usb
[ 0.200257] Advanced Linux Sound Architecture Driver Initialized.
[ 0.200257] PCI: Using ACPI for IRQ routing
[ 0.210954] PCI: pci_cache_line_size set to 64 bytes
[ 0.211046] e820: reserve RAM buffer [mem 0x00097800-0x0009ffff]
[ 0.211050] e820: reserve RAM buffer [mem 0xcff81000-0xcfffffff]
[ 0.211501] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.211511] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[ 0.213147] clocksource: Switched to clocksource hpet
[ 0.213265] FS-Cache: Loaded
[ 0.213362] CacheFiles: Loaded
[ 0.213404] pnp: PnP ACPI init
[ 0.214555] pnp 00:00: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
[ 0.214570] pnp 00:00: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:02:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
[ 0.214579] pnp 00:00: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:03:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
[ 0.214665] system 00:00: [io 0x4100-0x411f] has been reserved
[ 0.214670] system 00:00: [io 0x0228-0x022f] has been reserved
[ 0.214675] system 00:00: [io 0x040b] has been reserved
[ 0.214679] system 00:00: [io 0x04d6] has been reserved
[ 0.214683] system 00:00: [io 0x0c00-0x0c01] has been reserved
[ 0.214687] system 00:00: [io 0x0c14] has been reserved
[ 0.214691] system 00:00: [io 0x0c50-0x0c52] has been reserved
[ 0.214695] system 00:00: [io 0x0c6c-0x0c6d] has been reserved
[ 0.214699] system 00:00: [io 0x0c6f] has been reserved
[ 0.214703] system 00:00: [io 0x0cd0-0x0cd1] has been reserved
[ 0.214707] system 00:00: [io 0x0cd2-0x0cd3] has been reserved
[ 0.214710] system 00:00: [io 0x0cd4-0x0cdf] has been reserved
[ 0.214715] system 00:00: [io 0x4000-0x40fe] has been reserved
[ 0.214719] system 00:00: [io 0x4210-0x4217] has been reserved
[ 0.214723] system 00:00: [io 0x0b10-0x0b1f] has been reserved
[ 0.214729] system 00:00: [mem 0xfee00400-0xfee00fff window] has been reserved
[ 0.214738] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.215204] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.215355] system 00:02: [io 0x04d0-0x04d1] has been reserved
[ 0.215361] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.216650] pnp 00:03: [dma 4]
[ 0.216755] pnp 00:03: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.217157] system 00:04: [mem 0x000f0000-0x000fffff] could not be reserved
[ 0.217163] system 00:04: [mem 0xfed00000-0xfed000ff] has been reserved
[ 0.217168] system 00:04: [mem 0xcffe0000-0xcfffffff] could not be reserved
[ 0.217173] system 00:04: [mem 0xffff0000-0xffffffff] has been reserved
[ 0.217177] system 00:04: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.217182] system 00:04: [mem 0x00100000-0xcffdffff] could not be reserved
[ 0.217187] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.217191] system 00:04: [mem 0xfee00000-0xfee00fff] could not be reserved
[ 0.217196] system 00:04: [mem 0xfff80000-0xfffeffff] has been reserved
[ 0.217202] system 00:04: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.217226] pnp: PnP ACPI: found 5 devices
[ 0.226493] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.226541] pci 0000:01:00.0: BAR 6: assigned [mem 0xfdd00000-0xfdd1ffff pref]
[ 0.226547] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.226552] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
[ 0.226558] pci 0000:00:02.0: bridge window [mem 0xfdd00000-0xfddfffff]
[ 0.226563] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.226572] pci 0000:02:00.0: BAR 6: assigned [mem 0xfdc00000-0xfdc1ffff pref]
[ 0.226576] pci 0000:00:09.0: PCI bridge to [bus 02]
[ 0.226581] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff]
[ 0.226586] pci 0000:00:09.0: bridge window [mem 0xfdc00000-0xfdcfffff]
[ 0.226591] pci 0000:00:09.0: bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref]
[ 0.226599] pci 0000:03:00.0: BAR 6: assigned [mem 0xfdf00000-0xfdf1ffff pref]
[ 0.226602] pci 0000:00:0a.0: PCI bridge to [bus 03]
[ 0.226606] pci 0000:00:0a.0: bridge window [io 0xc000-0xcfff]
[ 0.226612] pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff]
[ 0.226616] pci 0000:00:0a.0: bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
[ 0.226624] pci 0000:00:14.4: PCI bridge to [bus 04]
[ 0.226663] pci 0000:00:14.4: bridge window [io 0xb000-0xbfff]
[ 0.226670] pci 0000:00:14.4: bridge window [mem 0xfda00000-0xfdafffff]
[ 0.226676] pci 0000:00:14.4: bridge window [mem 0xfd900000-0xfd9fffff pref]
[ 0.226688] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.226692] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.226696] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.226700] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff window]
[ 0.226703] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xffffffff window]
[ 0.226707] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.226711] pci_bus 0000:01: resource 1 [mem 0xfdd00000-0xfddfffff]
[ 0.226715] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.226719] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
[ 0.226722] pci_bus 0000:02: resource 1 [mem 0xfdc00000-0xfdcfffff]
[ 0.226726] pci_bus 0000:02: resource 2 [mem 0xfdb00000-0xfdbfffff 64bit pref]
[ 0.226730] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
[ 0.226733] pci_bus 0000:03: resource 1 [mem 0xfdf00000-0xfdffffff]
[ 0.226737] pci_bus 0000:03: resource 2 [mem 0xfde00000-0xfdefffff 64bit pref]
[ 0.226741] pci_bus 0000:04: resource 0 [io 0xb000-0xbfff]
[ 0.226744] pci_bus 0000:04: resource 1 [mem 0xfda00000-0xfdafffff]
[ 0.226748] pci_bus 0000:04: resource 2 [mem 0xfd900000-0xfd9fffff pref]
[ 0.226752] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7 window]
[ 0.226755] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff window]
[ 0.226759] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.226763] pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000dffff window]
[ 0.226767] pci_bus 0000:04: resource 8 [mem 0xd0000000-0xffffffff window]
[ 0.226948] NET: Registered protocol family 2
[ 0.227296] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.227486] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.227823] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.227932] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.227996] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.228203] NET: Registered protocol family 1
[ 0.228502] RPC: Registered named UNIX socket transport module.
[ 0.228504] RPC: Registered udp transport module.
[ 0.228506] RPC: Registered tcp transport module.
[ 0.228508] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.232191] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.232209] PCI: CLS 64 bytes, default 64
[ 0.232641] PCI-DMA: Disabling AGP.
[ 0.232853] PCI-DMA: aperture base @ c4000000 size 65536 KB
[ 0.232854] PCI-DMA: using GART IOMMU.
[ 0.232859] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 0.238923] LVT offset 1 assigned for vector 0x400
[ 0.238939] IBS: LVT offset 1 assigned
[ 0.239213] perf: AMD IBS detected (0x0000001f)
[ 0.241716] audit: initializing netlink subsys (disabled)
[ 0.241803] audit: type=2000 audit(1507482232.241:1): state=initialized audit_enabled=0 res=1
[ 0.242101] workingset: timestamp_bits=46 max_order=20 bucket_order=0
[ 0.245540] zbud: loaded
[ 0.247106] NFS: Registering the id_resolver key type
[ 0.247120] Key type id_resolver registered
[ 0.247122] Key type id_legacy registered
[ 0.247128] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 0.248001] fuse init (API version 7.26)
[ 0.251583] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.251588] io scheduler noop registered
[ 0.251591] io scheduler deadline registered (default)
[ 0.251593] io scheduler mq-deadline registered
[ 0.251595] io scheduler kyber registered
[ 0.251665] io scheduler bfq registered
[ 0.253415] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.253422] ACPI: Power Button [PWRB]
[ 0.253522] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.253525] ACPI: Power Button [PWRF]
[ 0.254644] ACPI: Invalid passive threshold
[ 0.254993] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 0.255306] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.255309] ACPI: Thermal Zone [THRM] (45 C)
[ 0.255783] Non-volatile memory driver v1.3
[ 0.255785] Linux agpgart interface v0.103
[ 0.259697] loop: module loaded
[ 0.259779] SCSI Media Changer driver v0.25
[ 0.259835] ahci 0000:00:11.0: version 3.0
[ 0.260554] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 0.260562] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio ccc
[ 0.262375] scsi host0: ahci
[ 0.262699] scsi host1: ahci
[ 0.262946] scsi host2: ahci
[ 0.263188] scsi host3: ahci
[ 0.263443] scsi host4: ahci
[ 0.263716] scsi host5: ahci
[ 0.263843] ata1: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 24
[ 0.263848] ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 24
[ 0.263852] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 24
[ 0.263856] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 24
[ 0.263860] ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f300 irq 24
[ 0.263864] ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f380 irq 24
[ 0.266556] scsi host6: pata_atiixp
[ 0.266821] scsi host7: pata_atiixp
[ 0.266895] ata7: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14
[ 0.266899] ata8: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15
[ 0.266955] sky2: driver version 1.30
[ 0.267179] sky2 0000:03:00.0: Yukon-2 EC Ultra chip revision 3
[ 0.267608] sky2 0000:03:00.0 eth0: addr 00:18:37:04:39:c2
[ 0.267661] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 0.267672] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 0.268184] r8169 0000:02:00.0 eth1: RTL8168b/8111b at 0xffffc90000035000, 00:08:54:52:28:41, XID 10000000 IRQ 26
[ 0.268190] r8169 0000:02:00.0 eth1: jumbo features [frames: 4080 bytes, tx checksumming: ko]
[ 0.268237] usbcore: registered new interface driver cdc_ether
[ 0.268252] usbcore: registered new interface driver cdc_eem
[ 0.268268] usbcore: registered new interface driver rndis_host
[ 0.268283] usbcore: registered new interface driver cdc_subset
[ 0.268306] usbcore: registered new interface driver cdc_ncm
[ 0.268317] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.268330] ehci-pci: EHCI PCI platform driver
[ 0.268677] QUIRK: Enable AMD PLL fix
[ 0.268707] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 0.268722] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 0.268731] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 0.268734] ehci-pci 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround
[ 0.268791] ehci-pci 0000:00:12.2: debug port 1
[ 0.268860] ehci-pci 0000:00:12.2: irq 17, io mem 0xfe02c000
[ 0.275117] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 0.275230] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.275234] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.275238] usb usb1: Product: EHCI Host Controller
[ 0.275242] usb usb1: Manufacturer: Linux 4.13.0+ ehci_hcd
[ 0.275245] usb usb1: SerialNumber: 0000:00:12.2
[ 0.275598] hub 1-0:1.0: USB hub found
[ 0.275612] hub 1-0:1.0: 6 ports detected
[ 0.276398] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 0.276412] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 0.276420] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 0.276423] ehci-pci 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround
[ 0.276483] ehci-pci 0000:00:13.2: debug port 1
[ 0.276558] ehci-pci 0000:00:13.2: irq 19, io mem 0xfe029000
[ 0.283117] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 0.283231] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.283235] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.283239] usb usb2: Product: EHCI Host Controller
[ 0.283242] usb usb2: Manufacturer: Linux 4.13.0+ ehci_hcd
[ 0.283245] usb usb2: SerialNumber: 0000:00:13.2
[ 0.283593] hub 2-0:1.0: USB hub found
[ 0.283608] hub 2-0:1.0: 6 ports detected
[ 0.283930] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.283935] ohci-pci: OHCI PCI platform driver
[ 0.284352] ohci-pci 0000:00:12.0: OHCI PCI host controller
[ 0.284366] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
[ 0.284424] ohci-pci 0000:00:12.0: irq 16, io mem 0xfe02e000
[ 0.340254] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.340260] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.340263] usb usb3: Product: OHCI PCI host controller
[ 0.340267] usb usb3: Manufacturer: Linux 4.13.0+ ohci_hcd
[ 0.340270] usb usb3: SerialNumber: 0000:00:12.0
[ 0.340623] hub 3-0:1.0: USB hub found
[ 0.340675] hub 3-0:1.0: 3 ports detected
[ 0.341308] ohci-pci 0000:00:12.1: OHCI PCI host controller
[ 0.341322] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4
[ 0.341363] ohci-pci 0000:00:12.1: irq 16, io mem 0xfe02d000
[ 0.397242] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.397248] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.397252] usb usb4: Product: OHCI PCI host controller
[ 0.397255] usb usb4: Manufacturer: Linux 4.13.0+ ohci_hcd
[ 0.397258] usb usb4: SerialNumber: 0000:00:12.1
[ 0.397625] hub 4-0:1.0: USB hub found
[ 0.397676] hub 4-0:1.0: 3 ports detected
[ 0.398318] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 0.398334] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 0.398400] ohci-pci 0000:00:13.0: irq 18, io mem 0xfe02b000
[ 0.443692] ata7.00: ATAPI: _NEC DV-5800A, 1.92, max UDMA/33
[ 0.454243] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.454249] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.454253] usb usb5: Product: OHCI PCI host controller
[ 0.454256] usb usb5: Manufacturer: Linux 4.13.0+ ohci_hcd
[ 0.454259] usb usb5: SerialNumber: 0000:00:13.0
[ 0.454616] hub 5-0:1.0: USB hub found
[ 0.454666] hub 5-0:1.0: 3 ports detected
[ 0.455262] ohci-pci 0000:00:13.1: OHCI PCI host controller
[ 0.455275] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6
[ 0.455326] ohci-pci 0000:00:13.1: irq 18, io mem 0xfe02a000
[ 0.465606] ata7.00: configured for UDMA/33
[ 0.511240] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.511246] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.511250] usb usb6: Product: OHCI PCI host controller
[ 0.511253] usb usb6: Manufacturer: Linux 4.13.0+ ohci_hcd
[ 0.511256] usb usb6: SerialNumber: 0000:00:13.1
[ 0.511599] hub 6-0:1.0: USB hub found
[ 0.511650] hub 6-0:1.0: 3 ports detected
[ 0.511889] usbcore: registered new interface driver uas
[ 0.511967] usbcore: registered new interface driver usb-storage
[ 0.512064] usbcore: registered new interface driver usbserial
[ 0.512104] udc-core: couldn't find an available UDC - added [g_ether] to list of pending drivers
[ 0.512157] i8042: PNP: No PS/2 controller found.
[ 0.512158] i8042: Probing ports directly.
[ 0.515351] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.515361] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.515651] mousedev: PS/2 mouse device common for all mice
[ 0.515920] rtc_cmos 00:01: RTC can wake from S4
[ 0.516139] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 0.516181] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.516194] i2c /dev entries driver
[ 0.516269] ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B08 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B07 (\SM00) (20170531/utaddress-247)
[ 0.516283] ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B08 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B0F (\SOR1) (20170531/utaddress-247)
[ 0.516293] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 0.516461] w83627ehf: Found W83627DHG chip at 0x290
[ 0.516479] ACPI Warning: SystemIO range 0x0000000000000295-0x0000000000000296 conflicts with OpRegion 0x0000000000000295-0x0000000000000296 (\SEN1) (20170531/utaddress-247)
[ 0.516489] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 0.517365] hidraw: raw HID events driver (C) Jiri Kosina
[ 0.517735] usbcore: registered new interface driver usbhid
[ 0.517737] usbhid: USB HID core driver
[ 0.518712] usbcore: registered new interface driver snd-usb-audio
[ 0.519226] NET: Registered protocol family 10
[ 0.520079] Segment Routing with IPv6
[ 0.520114] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 0.520403] NET: Registered protocol family 17
[ 0.520441] Key type dns_resolver registered
[ 0.521400] microcode: microcode updated early to new patch_level=0x010000c8
[ 0.521490] microcode: CPU0: patch_level=0x010000c8
[ 0.521521] microcode: CPU1: patch_level=0x010000c8
[ 0.521531] microcode: CPU2: patch_level=0x010000c8
[ 0.521559] microcode: CPU3: patch_level=0x010000c8
[ 0.521657] microcode: Microcode Update Driver: v2.2.
[ 0.521676] sched_clock: Marking stable (521641955, 0)->(634812655, -113170700)
[ 0.522160] zswap: loaded using pool lzo/zbud
[ 0.522890] acpi_cpufreq: overriding BIOS provided _PSD data
[ 0.523286] ALSA device list:
[ 0.523288] No soundcards found.
[ 0.526495] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC662 rev1: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[ 0.526500] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 0.526504] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 0.526508] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 0.526511] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0
[ 0.526514] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 0.526518] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
[ 0.526522] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
[ 0.526525] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
[ 0.538640] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input4
[ 0.547938] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input5
[ 0.548095] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
[ 0.548405] input: HDA ATI SB Line Out as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
[ 0.574822] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 0.574865] ata6: SATA link down (SStatus 0 SControl 300)
[ 0.574917] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 0.574965] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 0.575001] ata5: SATA link down (SStatus 0 SControl 300)
[ 0.575068] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 0.575563] ata2.00: ATA-9: WDC WD20EZRX-00DC0B0, 80.00A80, max UDMA/133
[ 0.575568] ata2.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 0.575711] ata1.00: NCQ Send/Recv Log not supported
[ 0.575717] ata1.00: ATA-9: Samsung SSD 840 Series, DXT0AB0Q, max UDMA/133
[ 0.575721] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 0.576074] ata1.00: NCQ Send/Recv Log not supported
[ 0.576081] ata1.00: configured for UDMA/133
[ 0.576126] ata2.00: configured for UDMA/133
[ 0.576453] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 840 AB0Q PQ: 0 ANSI: 5
[ 0.577093] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 0.577133] ata1.00: Enabling discard_zeroes_data
[ 0.577350] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[ 0.577382] scsi 1:0:0:0: Direct-Access ATA WDC WD20EZRX-00D 0A80 PQ: 0 ANSI: 5
[ 0.577393] sd 0:0:0:0: [sda] Write Protect is off
[ 0.577399] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.577474] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.577859] ata1.00: Enabling discard_zeroes_data
[ 0.577951] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 0.578006] sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[ 0.578022] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[ 0.578064] sd 1:0:0:0: [sdb] Write Protect is off
[ 0.578070] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 0.578119] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.578548] sda: sda1 sda2 sda3 sda4
[ 0.579083] ata1.00: Enabling discard_zeroes_data
[ 0.579212] ata3.00: ATA-8: WDC WD20EARS-00MVWB0, 51.0AB51, max UDMA/133
[ 0.579216] ata3.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 0.579319] ata4.00: ATA-8: WDC WD20EARS-00MVWB0, 51.0AB51, max UDMA/133
[ 0.579323] ata4.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 0.579511] sd 0:0:0:0: [sda] Attached SCSI disk
[ 0.583258] ata3.00: configured for UDMA/133
[ 0.583314] ata4.00: configured for UDMA/133
[ 0.583624] scsi 2:0:0:0: Direct-Access ATA WDC WD20EARS-00M AB51 PQ: 0 ANSI: 5
[ 0.584293] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 0.584390] sd 2:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[ 0.584439] sd 2:0:0:0: [sdc] Write Protect is off
[ 0.584444] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 0.584515] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.584574] scsi 3:0:0:0: Direct-Access ATA WDC WD20EARS-00M AB51 PQ: 0 ANSI: 5
[ 0.585091] sd 3:0:0:0: Attached scsi generic sg3 type 0
[ 0.585169] sd 3:0:0:0: [sdd] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[ 0.585214] sd 3:0:0:0: [sdd] Write Protect is off
[ 0.585219] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 0.585280] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.587626] scsi 6:0:0:0: CD-ROM _NEC DV-5800A 1.92 PQ: 0 ANSI: 5
[ 0.601608] sr 6:0:0:0: [sr0] scsi3-mmc drive: 20x/48x cd/rw xa/form2 cdda tray
[ 0.601612] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 0.601913] sr 6:0:0:0: Attached scsi CD-ROM sr0
[ 0.602121] sr 6:0:0:0: Attached scsi generic sg4 type 5
[ 0.800108] usb 5-2: new low-speed USB device number 2 using ohci-pci
[ 0.967171] usb 5-2: New USB device found, idVendor=04d9, idProduct=0499
[ 0.967177] usb 5-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 0.980487] sdc: sdc1
[ 0.981594] sd 2:0:0:0: [sdc] Attached SCSI disk
[ 0.981804] input: HID 04d9:0499 as /devices/pci0000:00/0000:00:13.0/usb5/5-2/5-2:1.0/0003:04D9:0499.0001/input/input8
[ 0.982057] hid-generic 0003:04D9:0499.0001: input,hidraw0: USB HID v1.10 Mouse [HID 04d9:0499] on usb-0000:00:13.0-2/input0
[ 0.992811] sdd: sdd1
[ 0.993941] sd 3:0:0:0: [sdd] Attached SCSI disk
[ 1.179910] sdb: sdb1
[ 1.180962] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 1.180994] md: Skipping autodetection of RAID arrays. (raid=autodetect will force)
[ 1.184780] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[ 1.184804] VFS: Mounted root (ext4 filesystem) readonly on device 8:4.
[ 1.186149] devtmpfs: mounted
[ 1.188713] Freeing unused kernel memory: 852K
[ 1.188717] Write protecting the kernel read-only data: 12288k
[ 1.189971] Freeing unused kernel memory: 1164K
[ 1.204789] Freeing unused kernel memory: 1752K
[ 1.212825] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.248121] tsc: Refined TSC clocksource calibration: 3200.700 MHz
[ 1.248144] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2e22df9b73f, max_idle_ns: 440795309381 ns
[ 1.308543] systemd[1]: systemd 234 running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK -SYSVINIT +UTMP -LIBCRYPTSETUP +GCRYPT -GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD -IDN2 -IDN default-hierarchy=hybrid)
[ 1.308726] systemd[1]: Detected architecture x86-64.
[ 1.310106] systemd[1]: Set hostname to <graviton>.
[ 1.439945] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 1.440130] systemd[1]: Listening on Journal Audit Socket.
[ 1.440175] systemd[1]: Listening on udev Control Socket.
[ 1.440221] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 1.440569] systemd[1]: Set up automount data.automount.
[ 1.440620] systemd[1]: Listening on Journal Socket.
[ 1.440646] systemd[1]: Reached target Login Prompts.
[ 1.488303] EXT4-fs (sda4): re-mounted. Opts: discard
[ 1.537751] systemd-journald[130]: Received request to flush runtime journal from PID 1
[ 1.544127] usb 6-2: new low-speed USB device number 2 using ohci-pci
[ 1.601856] Adding 4194300k swap on /swapfile. Priority:-1 extents:7 across:5144572k SSFS
[ 1.709112] usb 6-2: New USB device found, idVendor=046a, idProduct=0021
[ 1.709115] usb 6-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.715042] r8169 0000:02:00.0 enp2s0: renamed from eth1
[ 1.718649] input: HID 046a:0021 as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2:1.0/0003:046A:0021.0002/input/input9
[ 1.721643] sky2 0000:03:00.0 enp3s0: renamed from eth0
[ 1.751413] r8169 0000:02:00.0 enp2s0: link down
[ 1.751457] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 1.757748] sky2 0000:03:00.0 enp3s0: enabling interface
[ 1.759022] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[ 1.770182] hid-generic 0003:046A:0021.0002: input,hidraw1: USB HID v1.11 Keyboard [HID 046a:0021] on usb-0000:00:13.1-2/input0
[ 1.771378] random: crng init done
[ 1.775440] input: HID 046a:0021 as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2:1.1/0003:046A:0021.0003/input/input10
[ 1.778607] [drm] radeon kernel modesetting enabled.
[ 1.779366] [drm] initializing kernel modesetting (BARTS 0x1002:0x6739 0x174B:0x174B 0x00).
[ 1.779920] ATOM BIOS: BARTS
[ 1.780285] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[ 1.780287] radeon 0000:01:00.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF
[ 1.780290] [drm] Detected VRAM RAM=1024M, BAR=256M
[ 1.780291] [drm] RAM width 256bits DDR
[ 1.782641] [TTM] Zone kernel: Available graphics memory: 2022410 kiB
[ 1.782643] [TTM] Initializing pool allocator
[ 1.782646] [TTM] Initializing DMA pool allocator
[ 1.782667] [drm] radeon: 1024M of VRAM memory ready
[ 1.782668] [drm] radeon: 1024M of GTT memory ready.
[ 1.782677] [drm] Loading BARTS Microcode
[ 1.782682] [drm] Internal thermal controller with fan control
[ 1.782754] == power state 0 ==
[ 1.782754] ui class: none
[ 1.782755] internal class: boot
[ 1.782756] caps:
[ 1.782757] uvd vclk: 0 dclk: 0
[ 1.782758] power level 0 sclk: 10000 mclk: 15000 vddc: 950 vddci: 950
[ 1.782758] power level 1 sclk: 10000 mclk: 15000 vddc: 950 vddci: 950
[ 1.782759] power level 2 sclk: 10000 mclk: 15000 vddc: 950 vddci: 950
[ 1.782759] status: c r b
[ 1.782760] == power state 1 ==
[ 1.782761] ui class: performance
[ 1.782761] internal class: none
[ 1.782762] caps:
[ 1.782762] uvd vclk: 0 dclk: 0
[ 1.782763] power level 0 sclk: 10000 mclk: 15000 vddc: 950 vddci: 950
[ 1.782763] power level 1 sclk: 60000 mclk: 100000 vddc: 1100 vddci: 1100
[ 1.782764] power level 2 sclk: 77500 mclk: 100000 vddc: 1150 vddci: 1100
[ 1.782764] status:
[ 1.782765] == power state 2 ==
[ 1.782765] ui class: none
[ 1.782765] internal class: uvd
[ 1.782766] caps: video
[ 1.782767] uvd vclk: 54000 dclk: 40000
[ 1.782768] power level 0 sclk: 30000 mclk: 100000 vddc: 950 vddci: 1100
[ 1.782768] power level 1 sclk: 30000 mclk: 100000 vddc: 950 vddci: 1100
[ 1.782769] power level 2 sclk: 77500 mclk: 100000 vddc: 1150 vddci: 1100
[ 1.782769] status:
[ 1.782770] == power state 3 ==
[ 1.782770] ui class: none
[ 1.782770] internal class: uvd_mvc
[ 1.782771] caps: video
[ 1.782772] uvd vclk: 70000 dclk: 56000
[ 1.782772] power level 0 sclk: 60000 mclk: 100000 vddc: 1100 vddci: 1100
[ 1.782773] power level 1 sclk: 60000 mclk: 100000 vddc: 1100 vddci: 1100
[ 1.782773] power level 2 sclk: 77500 mclk: 100000 vddc: 1150 vddci: 1100
[ 1.782773] status:
[ 1.789764] [drm] radeon: dpm initialized
[ 1.789797] [drm] GART: num cpu pages 262144, num gpu pages 262144
[ 1.791716] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[ 1.810065] [drm] PCIE GART of 1024M enabled (table at 0x0000000000162000).
[ 1.810206] radeon 0000:01:00.0: WB enabled
[ 1.810209] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff880123fcbc00
[ 1.810210] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff880123fcbc0c
[ 1.810953] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc90001432118
[ 1.810956] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.810956] [drm] Driver supports precise vblank timestamp query.
[ 1.810957] radeon 0000:01:00.0: radeon: MSI limited to 32-bit
[ 1.811007] radeon 0000:01:00.0: radeon: using MSI.
[ 1.811047] [drm] radeon: irq initialized.
[ 1.827270] hid-generic 0003:046A:0021.0003: input,hidraw2: USB HID v1.11 Device [HID 046a:0021] on usb-0000:00:13.1-2/input1
[ 1.828302] [drm] ring test on 0 succeeded in 1 usecs
[ 1.828314] [drm] ring test on 3 succeeded in 6 usecs
[ 1.947544] md/raid:md127: device sdb1 operational as raid disk 2
[ 1.947546] md/raid:md127: device sdd1 operational as raid disk 1
[ 1.947547] md/raid:md127: device sdc1 operational as raid disk 0
[ 1.948620] md/raid:md127: raid level 5 active with 3 out of 3 devices, algorithm 2
[ 1.948667] md127: detected capacity change from 0 to 4000792444928
[ 2.005560] [drm] ring test on 5 succeeded in 2 usecs
[ 2.005570] [drm] UVD initialized successfully.
[ 2.005840] [drm] ib test on ring 0 succeeded in 0 usecs
[ 2.005941] [drm] ib test on ring 3 succeeded in 0 usecs
[ 2.119174] usb 2-6: new high-speed USB device number 4 using ehci-pci
[ 2.256169] clocksource: Switched to clocksource tsc
[ 2.293282] usb 2-6: New USB device found, idVendor=056d, idProduct=0000
[ 2.293286] usb 2-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.293287] usb 2-6: Product: USB HUB
[ 2.293289] usb 2-6: Manufacturer: EIZO
[ 2.293557] hub 2-6:1.0: USB hub found
[ 2.293653] hub 2-6:1.0: 3 ports detected
[ 2.580166] usb 2-6.2: new full-speed USB device number 5 using ehci-pci
[ 2.664258] [drm] ib test on ring 5 succeeded
[ 2.752114] usb 2-6.2: New USB device found, idVendor=05e1, idProduct=202a
[ 2.752116] usb 2-6.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.752117] usb 2-6.2: Product: USB Ear-Microphone
[ 2.752118] usb 2-6.2: Manufacturer: Generic
[ 2.752119] usb 2-6.2: SerialNumber: 0000000001
[ 2.793936] input: Generic USB Ear-Microphone as /devices/pci0000:00/0000:00:13.2/usb2/2-6/2-6.2/2-6.2:1.3/0003:05E1:202A.0004/input/input11
[ 2.845408] hid-generic 0003:05E1:202A.0004: input,hidraw3: USB HID v1.00 Device [Generic USB Ear-Microphone] on usb-0000:00:13.2-6.2/input3
[ 2.921154] usb 2-6.3: new full-speed USB device number 6 using ehci-pci
[ 3.069960] usb 2-6.3: New USB device found, idVendor=056d, idProduct=0002
[ 3.069963] usb 2-6.3: New USB device strings: Mfr=4, Product=14, SerialNumber=0
[ 3.069965] usb 2-6.3: Product: EIZO USB HID Monitor
[ 3.069967] usb 2-6.3: Manufacturer: EIZO
[ 3.407236] hid-generic 0003:056D:0002.0005: hiddev0,hidraw4: USB HID v1.10 Device [EIZO EIZO USB HID Monitor] on usb-0000:00:13.2-6.3/input0
[ 3.956803] [drm] Radeon Display Connectors
[ 3.956807] [drm] Connector 0:
[ 3.956808] [drm] DP-1
[ 3.956809] [drm] HPD4
[ 3.956814] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[ 3.956815] [drm] Encoders:
[ 3.956816] [drm] DFP1: INTERNAL_UNIPHY2
[ 3.956818] [drm] Connector 1:
[ 3.956819] [drm] HDMI-A-1
[ 3.956821] [drm] HPD3
[ 3.956824] [drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
[ 3.956825] [drm] Encoders:
[ 3.956826] [drm] DFP2: INTERNAL_UNIPHY2
[ 3.956827] [drm] Connector 2:
[ 3.956829] [drm] DVI-I-1
[ 3.956830] [drm] HPD6
[ 3.956833] [drm] DDC: 0x6470 0x6470 0x6474 0x6474 0x6478 0x6478 0x647c 0x647c
[ 3.956834] [drm] Encoders:
[ 3.956836] [drm] DFP3: INTERNAL_UNIPHY
[ 3.956837] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 3.956838] [drm] Connector 3:
[ 3.956839] [drm] DVI-D-1
[ 3.956841] [drm] HPD1
[ 3.956844] [drm] DDC: 0x6480 0x6480 0x6484 0x6484 0x6488 0x6488 0x648c 0x648c
[ 3.956845] [drm] Encoders:
[ 3.956846] [drm] DFP4: INTERNAL_UNIPHY1
[ 3.957139] switching from power state:
[ 3.957142] ui class: none
[ 3.957143] internal class: boot
[ 3.957147] caps:
[ 3.957150] uvd vclk: 0 dclk: 0
[ 3.957154] power level 0 sclk: 10000 mclk: 15000 vddc: 950 vddci: 950
[ 3.957161] power level 1 sclk: 10000 mclk: 15000 vddc: 950 vddci: 950
[ 3.957164] power level 2 sclk: 10000 mclk: 15000 vddc: 950 vddci: 950
[ 3.957165] status: c b
[ 3.957169] switching to power state:
[ 3.957171] ui class: performance
[ 3.957172] internal class: none
[ 3.957175] caps:
[ 3.957177] uvd vclk: 0 dclk: 0
[ 3.957180] power level 0 sclk: 10000 mclk: 15000 vddc: 950 vddci: 950
[ 3.957182] power level 1 sclk: 60000 mclk: 100000 vddc: 1100 vddci: 1100
[ 3.957185] power level 2 sclk: 77500 mclk: 100000 vddc: 1150 vddci: 1100
[ 3.957185] status: r
[ 4.026819] [drm] fb mappable at 0xD0363000
[ 4.026820] [drm] vram apper at 0xD0000000
[ 4.026821] [drm] size 7299072
[ 4.026821] [drm] fb depth is 24
[ 4.026821] [drm] pitch is 6912
[ 4.026936] fbcon: radeondrmfb (fb0) is primary device
[ 4.029530] switching from power state:
[ 4.029531] ui class: performance
[ 4.029531] internal class: none
[ 4.029532] caps:
[ 4.029533] uvd vclk: 0 dclk: 0
[ 4.029534] power level 0 sclk: 10000 mclk: 15000 vddc: 950 vddci: 950
[ 4.029535] power level 1 sclk: 60000 mclk: 100000 vddc: 1100 vddci: 1100
[ 4.029535] power level 2 sclk: 77500 mclk: 100000 vddc: 1150 vddci: 1100
[ 4.029536] status: c r
[ 4.029536] switching to power state:
[ 4.029537] ui class: performance
[ 4.029537] internal class: none
[ 4.029537] caps:
[ 4.029538] uvd vclk: 0 dclk: 0
[ 4.029538] power level 0 sclk: 10000 mclk: 15000 vddc: 950 vddci: 950
[ 4.029539] power level 1 sclk: 60000 mclk: 100000 vddc: 1100 vddci: 1100
[ 4.029540] power level 2 sclk: 77500 mclk: 100000 vddc: 1150 vddci: 1100
[ 4.029540] status: c r
[ 4.062546] Console: switching to colour frame buffer device 210x65
[ 4.067417] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[ 4.075264] [drm] Initialized radeon 2.50.0 20080528 for 0000:01:00.0 on minor 0
[ 7.567002] sky2 0000:03:00.0 enp3s0: Link is up at 1000 Mbps, full duplex, flow control both
[ 7.567051] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
[ 11.189182] radeon_dp_aux_transfer_native: 174 callbacks suppressed
\
 
 \ /
  Last update: 2017-10-13 13:40    [W:0.404 / U:0.108 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site