lkml.org 
[lkml]   [2017]   [Oct]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/2] ARM: dts: at91: disable the nxp,se97b SMBUS timeout on the TSE-850
Date
The I2C adapter driver is sometimes slow, causing the SCL line to
be stuck low for more than the stipulated SMBUS timeout of 25-35 ms.
This causes the client device to give up which in turn causes silent
corruption of data. So, disable the SMBUS timeout in the client device.

Signed-off-by: Peter Rosin <peda@axentia.se>
---
arch/arm/boot/dts/at91-tse850-3.dts | 1 +
1 file changed, 1 insertion(+)

diff --git a/arch/arm/boot/dts/at91-tse850-3.dts b/arch/arm/boot/dts/at91-tse850-3.dts
index 5f29010cdbd8..9b82cc8843e1 100644
--- a/arch/arm/boot/dts/at91-tse850-3.dts
+++ b/arch/arm/boot/dts/at91-tse850-3.dts
@@ -221,6 +221,7 @@
jc42@18 {
compatible = "nxp,se97b", "jedec,jc-42.4-temp";
reg = <0x18>;
+ smbus-timeout-disable;
};

dpot: mcp4651-104@28 {
--
2.11.0
\
 
 \ /
  Last update: 2017-10-13 11:27    [W:0.063 / U:2.724 seconds]
©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site