lkml.org 
[lkml]   [2017]   [Oct]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH/RFC 1/5] dt-bindings: mfd: bd9571mwv: Document rohm,ddr-backup-power
On Tue, 10 Oct 2017, Geert Uytterhoeven wrote:

> Document the new optional "rohm,ddr-backup-power" property.
>
> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
> ---
> Documentation/devicetree/bindings/mfd/bd9571mwv.txt | 7 +++++++
> 1 file changed, 7 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/mfd/bd9571mwv.txt b/Documentation/devicetree/bindings/mfd/bd9571mwv.txt
> index 9ab216a851d5619b..7ea3f2db41d4e501 100644
> --- a/Documentation/devicetree/bindings/mfd/bd9571mwv.txt
> +++ b/Documentation/devicetree/bindings/mfd/bd9571mwv.txt
> @@ -25,6 +25,12 @@ Required properties:
> Each child node is defined using the standard
> binding for regulators.
>
> +Optional properties:
> + - rohm,ddr-backup-power : Value to use for DDR-Backup Power. This controls
> + which DDR rails need to be kept powered when backup
> + mode is enabled, cfr. the KEEPON_DDR* bits in the

Perhaps it's just me, but I'm confused by this line.

Can you word it another way?

> + documentation for the "BKUP Mode Cnt" register.
> +
> Example:
>
> pmic: pmic@30 {
> @@ -36,6 +42,7 @@ Example:
> #interrupt-cells = <2>;
> gpio-controller;
> #gpio-cells = <2>;
> + rohm,ddr-backup-power = <15>;

Can you explain what this means? Is it a mask, or does line 15 need
to be kept on? What is the range? Is 0 acceptable? Clarification
required please.

> regulators {
> dvfs: dvfs {

--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

\
 
 \ /
  Last update: 2017-10-13 10:56    [W:0.120 / U:0.068 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site