lkml.org 
[lkml]   [2017]   [Oct]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH net-next] net: dsa: set random switch address
Date
Hi Florian,

Florian Fainelli <f.fainelli@gmail.com> writes:

> On 10/12/2017 03:10 PM, Vivien Didelot wrote:
>> An Ethernet switch may support having a MAC address, which can be used
>> as the switch's source address in transmitted full-duplex Pause frames.
>>
>> If a DSA switch supports the related .set_addr operation, the DSA core
>> sets the master's MAC address on the switch.
>>
>> This won't make sense anymore in a multi-CPU ports system, because there
>> won't be a unique master device assigned to a switch tree.
>
> Thus far, everything you have said is true, but why we should do it,
> that is: what if we don't, needs to be explained. Does that create a
> problem with the generation of pause frames throughout the switch fabric?
>
>>
>> To fix this, assign a random MAC address to the switch chip instead.
>
> Maybe this is something that should be removed entirely from the DSA
> core and pushed into the individual switch drivers instead. dsa_loop
> implements it for code coverage, but that does not do anything.
>
> set_addr is confusing in that you may think it could be used to program
> the switch with the MAC address of the CPU/management port such that you
> can disable MAC address learning on said port, but in fact, that's not
> how it is used.

You are correct. So what I can do is assign a random MAC address in the
Marvell driver, remove the .set_addr implementation of mv88e6xxx and
dsa_loop, and finally remove this code from DSA core completely.


Thanks,

Vivien

\
 
 \ /
  Last update: 2017-10-13 00:36    [W:0.085 / U:0.164 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site