lkml.org 
[lkml]   [2017]   [Oct]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v7 1/4] firmware: scm: Add new SCM call API for switching memory ownership
On Fri 21 Jul 03:49 PDT 2017, Avaneesh Kumar Dwivedi wrote:

> Two different processors on a SOC need to switch memory ownership
> during load/unload. To enable this, second level memory map table
> need to be updated, which is done by secure layer.
> This patch adds the interface for making secure monitor call for
> memory ownership switching request.
>

As I reported to you a while back I finally managed to use this to get
the modem on db820c up and running (with "all" IPCROUTER services
showing up). So let's try to resurrect and get this merged!


In addition I've successfully used this patch in extending the rmtfs
shared memory driver to allow setting up the ownership of that memory.

[..]
> diff --git a/drivers/firmware/qcom_scm.c b/drivers/firmware/qcom_scm.c
> index bb16510..009a42d 100644
> --- a/drivers/firmware/qcom_scm.c
> +++ b/drivers/firmware/qcom_scm.c
> @@ -40,6 +40,18 @@ struct qcom_scm {
> struct reset_controller_dev reset;
> };
>
> +struct qcom_scm_current_perm_info {
> + __le32 vmid;
> + __le32 perm;
> + __le64 ctx;
> + __le32 ctx_size;
> +};

I learned the hard way that this struct is supposed to be 24 bytes, so
please add a __le32 padding; at the end of this.

[..]
> +int qcom_scm_assign_mem(phys_addr_t mem_addr, size_t mem_sz, int srcvm,
> + struct qcom_scm_vmperm *newvm, int dest_cnt)
> +{

It turns out that the standard way of calling this (shown by the
remoteproc and rmtfs-memory driver implementations) is:

ret = qcom_scm_assign_mem(mem, len, curr_vm, perms, sizeof(perms));
if (ret < 0)
fail();
curr_vm = ret;

I therefor suggest that we make one more adjustment to the prototype in
the form of taking srcvm as a pointer. And as this is now a bitmask it
should be made an unsigned int. I.e.

int qcom_scm_assign_mem(phys_addr_t mem_addr, size_t mem_sz, unsigned int srcvm,
struct qcom_scm_vmperm *newvm, int dest_cnt)

> + struct qcom_scm_current_perm_info *destvm;
> + struct qcom_scm_mem_map_info *mem;
> + phys_addr_t memory_phys;
> + phys_addr_t dest_phys;
> + phys_addr_t src_phys;
> + size_t mem_all_sz;
> + size_t memory_sz;
> + size_t dest_sz;
> + size_t src_sz;
> + int next_vm;
> + __le32 *src;
> + void *ptr;
> + int ret;
> + int len;
> + int i;
> +
> + src_sz = hweight_long(srcvm) * sizeof(*src);
> + memory_sz = sizeof(*mem);
> + dest_sz = dest_cnt * sizeof(*destvm);
> + mem_all_sz = src_sz + memory_sz + dest_sz;

ALIGN(x + y + z, 64) <= ALIGN(x, 64) + ALIGN(y, 64) + ALIGN(z, 64)

So please replace this with:

ptr_sz = ALIGN(src_sz, SZ_64) + ALIGN(memory_sz, SZ_64) +
ALIGN(dest_sz, SZ_64);

(renaming the variable to ptr_sz saves you some line wraps as well)

> +
> + ptr = dma_alloc_coherent(__scm->dev, ALIGN(mem_all_sz, SZ_64),
> + &src_phys, GFP_KERNEL);
> +
> + if (!ptr)
> + return -ENOMEM;
> +
> + /* Fill source vmid detail */
> + src = ptr;
> + len = hweight_long(srcvm);
> + for (i = 0; i < len; i++) {
> + src[i] = cpu_to_le32(ffs(srcvm) - 1);
> + srcvm ^= 1 << (ffs(srcvm) - 1);
> + }
> +
> + /* Fill details of mem buff to map */
> + mem = ptr + ALIGN(src_sz, SZ_64);
> + memory_phys = src_phys + ALIGN(src_sz, SZ_64);
> + mem[0].mem_addr = cpu_to_le64(mem_addr);
> + mem[0].mem_size = cpu_to_le64(mem_sz);
> +
> + next_vm = 0;
> + /* Fill details of next vmid detail */
> + destvm = ptr + ALIGN(memory_sz, SZ_64) + ALIGN(src_sz, SZ_64);
> + dest_phys = memory_phys + ALIGN(memory_sz, SZ_64);

For clarity it would be nice if you keep the math for virtual and
physical addresses the same; so add another variable "ptr_phys" and
replace this with:
dest_phys = ptr_phys + ALIGN(src_sz, 64) + ALIGN(memory_sz, 64);

> + for (i = 0; i < dest_cnt; i++) {
> + destvm[i].vmid = cpu_to_le32(newvm[i].vmid);
> + destvm[i].perm = cpu_to_le32(newvm[i].perm);
> + destvm[i].ctx = 0;
> + destvm[i].ctx_size = 0;
> + next_vm |= BIT(newvm[i].vmid);
> + }
> +
> + ret = __qcom_scm_assign_mem(__scm->dev, memory_phys, memory_sz,
> + src_phys, src_sz, dest_phys, dest_sz);
> + dma_free_coherent(__scm->dev, ALIGN(mem_all_sz, SZ_64),
> + ptr, src_phys);
> + if (ret != 0) {
> + dev_err(__scm->dev,
> + "Assign memory protection call failed %d.\n", ret);
> + return -EINVAL;
> + } else {
> + return next_vm;
> + }

Replace this with:

if (ret) {
dev_err(__scm->dev,
"Assign memory protection call failed %d.\n", ret);
return -EINVAL;
}

*srcvm = next_vm;
return 0;


> +}
> +EXPORT_SYMBOL(qcom_scm_assign_mem);
> +

Regards,
Bjorn

\
 
 \ /
  Last update: 2017-10-12 20:12    [W:0.090 / U:0.072 seconds]
©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site