[lkml]   [2017]   [Oct]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Patch in this message
Subject[PATCH v2] ASoC: Intel: Skylake: Decrease loglevel for topology loading
In case of failure in loading customize topology firmware, dfw_sst.bin
gets loaded. However, current log provides this message as error even
after successfully falling back to default topology "dfw_sst.bin".

Hence to convey proper message, changing log level and message.

Signed-off-by: Chintan Patel <>
Changes in v2:
Addressing review comments from Takashi Iwai by changing
loglevel as info

sound/soc/intel/skylake/skl-topology.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/soc/intel/skylake/skl-topology.c b/sound/soc/intel/skylake/skl-topology.c
index 22f768ca3c73..12f383fd7c39 100644
--- a/sound/soc/intel/skylake/skl-topology.c
+++ b/sound/soc/intel/skylake/skl-topology.c
@@ -3404,7 +3404,7 @@ int skl_tplg_init(struct snd_soc_platform *platform, struct hdac_ext_bus *ebus)

ret = request_firmware(&fw, skl->tplg_name, bus->dev);
if (ret < 0) {
- dev_err(bus->dev, "tplg fw %s load failed with %d\n",
+ dev_info(bus->dev, "tplg fw %s load failed with %d, falling back to dfw_sst.bin",
skl->tplg_name, ret);
ret = request_firmware(&fw, "dfw_sst.bin", bus->dev);
if (ret < 0) {
 \ /
  Last update: 2017-10-12 18:44    [W:0.020 / U:6.484 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site