lkml.org 
[lkml]   [2017]   [Oct]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 01/10] mpt3sas: Processing of Cable Exception events
Date
Earlier Active Cable Exception event with reason code
"Cable Degraded (0x02))" was added only for Active Cable,
Now this event is extended to Passive cable too.
So re-arranged display message accordingly.

Also added Cable Exception Event even for SAS3008 & SAS3108 HBAs
(i.e. MPI 2.5 spec supporting HBAs) earlier this event was
enabled only for MPI 2.6 spec supporting HBA devices.

Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@broadcom.com>
---
drivers/scsi/mpt3sas/mpt3sas_base.c | 5 ++---
drivers/scsi/mpt3sas/mpt3sas_scsih.c | 20 +++++++++++---------
2 files changed, 13 insertions(+), 12 deletions(-)

diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c
index 8799990..844e29c 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_base.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_base.c
@@ -655,7 +655,7 @@ _base_display_event_data(struct MPT3SAS_ADAPTER *ioc,
desc = "Temperature Threshold";
break;
case MPI2_EVENT_ACTIVE_CABLE_EXCEPTION:
- desc = "Active cable exception";
+ desc = "Cable Event";
break;
}

@@ -5517,8 +5517,7 @@ mpt3sas_base_attach(struct MPT3SAS_ADAPTER *ioc)
_base_unmask_events(ioc, MPI2_EVENT_IR_OPERATION_STATUS);
_base_unmask_events(ioc, MPI2_EVENT_LOG_ENTRY_ADDED);
_base_unmask_events(ioc, MPI2_EVENT_TEMP_THRESHOLD);
- if (ioc->hba_mpi_version_belonged == MPI26_VERSION)
- _base_unmask_events(ioc, MPI2_EVENT_ACTIVE_CABLE_EXCEPTION);
+ _base_unmask_events(ioc, MPI2_EVENT_ACTIVE_CABLE_EXCEPTION);

r = _base_make_ioc_operational(ioc);
if (r)
diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
index 22998cb..9594166 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
@@ -8056,19 +8056,21 @@ mpt3sas_scsih_event_callback(struct MPT3SAS_ADAPTER *ioc, u8 msix_index,
(Mpi26EventDataActiveCableExcept_t *) mpi_reply->EventData;
switch (ActiveCableEventData->ReasonCode) {
case MPI26_EVENT_ACTIVE_CABLE_INSUFFICIENT_POWER:
- pr_notice(MPT3SAS_FMT "Receptacle ID %d: This active cable"
- " requires %d mW of power\n", ioc->name,
- ActiveCableEventData->ReceptacleID,
+ pr_notice(MPT3SAS_FMT
+ "Currently an active cable with ReceptacleID %d\n",
+ ioc->name, ActiveCableEventData->ReceptacleID);
+ pr_notice("cannot be powered and devices connected\n");
+ pr_notice("to this active cable will not be seen\n");
+ pr_notice("This active cable require %d mW of power\n",
ActiveCableEventData->ActiveCablePowerRequirement);
- pr_notice(MPT3SAS_FMT "Receptacle ID %d: Devices connected"
- " to this active cable will not be seen\n",
- ioc->name, ActiveCableEventData->ReceptacleID);
break;

case MPI26_EVENT_ACTIVE_CABLE_DEGRADED:
- pr_notice(MPT3SAS_FMT "ReceptacleID %d: This cable",
- ioc->name, ActiveCableEventData->ReceptacleID);
- pr_notice(" is not running at an optimal speed(12 Gb/s)\n");
+ pr_notice(MPT3SAS_FMT
+ "Currently a cable with ReceptacleID %d\n",
+ ioc->name, ActiveCableEventData->ReceptacleID);
+ pr_notice(
+ "is not running at optimal speed(12 Gb/s rate)\n");
break;
}

--
2.4.3
\
 
 \ /
  Last update: 2017-10-10 15:16    [W:0.146 / U:0.080 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site