lkml.org 
[lkml]   [2017]   [Oct]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/4] dt-bindings: PCI: dra7xx: Add properties to enable x2 lane in dra7
Date
Add syscon properties required for configuring PCIe in x2 lane mode.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
---
Documentation/devicetree/bindings/pci/ti-pci.txt | 4 ++++
1 file changed, 4 insertions(+)

diff --git a/Documentation/devicetree/bindings/pci/ti-pci.txt b/Documentation/devicetree/bindings/pci/ti-pci.txt
index 82cb875e4cec..455cb74a475c 100644
--- a/Documentation/devicetree/bindings/pci/ti-pci.txt
+++ b/Documentation/devicetree/bindings/pci/ti-pci.txt
@@ -13,6 +13,10 @@ PCIe DesignWare Controller
- ti,hwmods : Name of the hwmod associated to the pcie, "pcie<X>",
where <X> is the instance number of the pcie from the HW spec.
- num-lanes as specified in ../designware-pcie.txt
+ - syscon-lane-conf : phandle/offset pair. Phandle to the system control module and the
+ register offset to specify 1 lane or 2 lane.
+ - syscon-lane-sel : phandle/offset pair. Phandle to the system control module and the
+ register offset to specify lane selection.

HOST MODE
=========
--
2.11.0
\
 
 \ /
  Last update: 2017-10-10 12:18    [W:0.074 / U:0.576 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site