lkml.org 
[lkml]   [2017]   [Oct]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 08/14] ARM: dts: at91: sama5d27_som1_ek: remove pull-up on SD/MMC lines
Date
From: Nicolas Ferre <nicolas.ferre@microchip.com>

As the board have the proper pull-ups soldered on the data
and CMD lines we don't need them specified in the PADs. So remove
the "bias-pull-up" property and set "bias-disable".

Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
[claudiu.beznea@microchip.com: change subject to match the desired prefix]
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
---
arch/arm/boot/dts/at91-sama5d27_som1_ek.dts | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
index 651ed5d4defc..e72036fa8ddb 100644
--- a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
+++ b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
@@ -349,7 +349,7 @@
<PIN_PA7__SDMMC0_DAT5>,
<PIN_PA8__SDMMC0_DAT6>,
<PIN_PA9__SDMMC0_DAT7>;
- bias-pull-up;
+ bias-disable;
};

ck_cd_vddsel {
@@ -367,7 +367,7 @@
<PIN_PA19__SDMMC1_DAT1>,
<PIN_PA20__SDMMC1_DAT2>,
<PIN_PA21__SDMMC1_DAT3>;
- bias-pull-up;
+ bias-disable;
};

conf-ck_cd {
--
2.7.4
\
 
 \ /
  Last update: 2017-10-10 12:14    [W:0.064 / U:2.084 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site