lkml.org 
[lkml]   [2017]   [Oct]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH v2 06/14] ARM: dts: at91: sama5d27_som1_ek: add pinmuxing for pwm0
    Date
    Add pin muxing for pwm0 and set it as disabled since it is in conflict
    with the pins for leds.

    Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
    ---
    arch/arm/boot/dts/at91-sama5d27_som1_ek.dts | 6 ++++--
    1 file changed, 4 insertions(+), 2 deletions(-)

    diff --git a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
    index 6c4c976a99d1..339f4e71cf40 100644
    --- a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
    +++ b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
    @@ -136,7 +136,9 @@
    };

    pwm0: pwm@f802c000 {
    - status = "okay";
    + pinctrl-names = "default";
    + pinctrl-0 = <&pinctrl_mikrobus1_pwm &pinctrl_mikrobus2_pwm>;
    + status = "disabled"; /* Conflict with leds. */
    };

    flx1: flexcom@f8038000 {
    @@ -529,7 +531,7 @@
    compatible = "gpio-leds";
    pinctrl-names = "default";
    pinctrl-0 = <&pinctrl_led_gpio_default>;
    - status = "okay";
    + status = "okay"; /* Conflict with pwm0. */

    red {
    label = "red";
    --
    2.7.4
    \
     
     \ /
      Last update: 2017-10-10 12:11    [W:3.003 / U:0.092 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site