lkml.org 
[lkml]   [2017]   [Oct]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
Subjecti2c-omap.c vs. qemu: too much work in one irq (and broken boot)
Hi!

I'm trying to get qemu emulation of Nokia N900 to work, but
unfortunately i2c-omap.c breaks boot in the emulator (real hardware
works ok).

[ 0.837524] omap2-onenand omap2-onenand: initializing on CS0, phys
base 0x01000000, virtual base d00c0000, freq 66 MHz
[ 0.838958] Muxed OneNAND 256MB 1.8V 16-bit (0x40)
[ 0.839752] OneNAND version = 0x0121
[ 0.842102] Scanning device for bad blocks
[ 1.012451] 6 ofpart partitions found on MTD device omap2-onenand
[ 1.013153] Creating 6 MTD partitions on "omap2-onenand":
[ 1.014007] 0x000000000000-0x000000020000 : "bootloader"
[ 1.018066] 0x000000020000-0x000000080000 : "config"
[ 1.020660] 0x000000080000-0x0000000c0000 : "log"
[ 1.022827] 0x0000000c0000-0x0000002c0000 : "kernel"
[ 1.025848] 0x0000002c0000-0x0000004c0000 : "initfs"
[ 1.028106] 0x0000004c0000-0x000010000000 : "rootfs"
[ 1.047668] omap_i2c 48070000.i2c: addr: 0x004b, len: 2, flags:
0x0, stop: 1
[ 1.048828] omap_i2c 48070000.i2c: IRQ (ISR = 0x0010)
[ 1.049530] omap_i2c 48070000.i2c: IRQ (ISR = 0x0010)
[ 1.050018] omap_i2c 48070000.i2c: IRQ (ISR = 0x0010)
[ 1.050476] omap_i2c 48070000.i2c: IRQ (ISR = 0x0010)
[ 1.050872] omap_i2c 48070000.i2c: IRQ (ISR = 0x0010)
[ 1.051422] omap_i2c 48070000.i2c: IRQ (ISR = 0x0010)
[ 1.052001] omap_i2c 48070000.i2c: IRQ (ISR = 0x0010)
[ 1.052398] omap_i2c 48070000.i2c: IRQ (ISR = 0x0010)
[ 1.052825] omap_i2c 48070000.i2c: IRQ (ISR = 0x0010)
[ 1.053222] omap_i2c 48070000.i2c: IRQ (ISR = 0x0010)
[ 1.053619] omap_i2c 48070000.i2c: IRQ (ISR = 0x0010)
[ 1.054016] omap_i2c 48070000.i2c: IRQ (ISR = 0x0010)
[ 1.054412] omap_i2c 48070000.i2c: IRQ (ISR = 0x0010)
[ 1.054840] omap_i2c 48070000.i2c: IRQ (ISR = 0x0010)
...

After 100 messages I get "Too much work in one IRQ" message, and then
repeat. I tried just disabling omap_i2c in the dts, but 1) its not
easy 2) I'd lose quite fundamental functionality.

Ideas welcome.

Best regards,
Pavel

PS: If anyone is interested, this is why working qemu would be useful:
https://wiki.postmarketos.org/wiki/Nokia_N900_(nokia-rx51) . There's a
lot of work to be done in the userspace, and swapping SD cards is kind
of slow.
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2017-10-01 22:42    [W:0.044 / U:0.040 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site