lkml.org 
[lkml]   [2017]   [Jan]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH v2] net: stmmac: fix maxmtu assignment to be within valid range
Date
> -----Original Message-----
> From: Kweh, Hock Leong
> Sent: Friday, January 06, 2017 6:08 PM
> To: David S. Miller <davem@davemloft.net>; Joao Pinto
> <Joao.Pinto@synopsys.com>; Giuseppe CAVALLARO <peppe.cavallaro@st.com>;
> seraphin.bonnaffe@st.com; Jarod Wilson <jarod@redhat.com>; Andy
> Shevchenko <andy.shevchenko@gmail.com>
> Cc: Alexandre TORGUE <alexandre.torgue@gmail.com>; Joachim Eastwood
> <manabian@gmail.com>; Niklas Cassel <niklas.cassel@axis.com>; Johan Hovold
> <johan@kernel.org>; pavel@ucw.cz; Kweh, Hock Leong
> <hock.leong.kweh@intel.com>; lars.persson@axis.com; netdev
> <netdev@vger.kernel.org>; LKML <linux-kernel@vger.kernel.org>
> Subject: [PATCH v2] net: stmmac: fix maxmtu assignment to be within valid
> range
>
> From: "Kweh, Hock Leong" <hock.leong.kweh@intel.com>
>
> There is no checking valid value of maxmtu when getting it from device tree.
> This resolution added the checking condition to ensure the assignment is made
> within a valid range.
>
> Signed-off-by: Kweh, Hock Leong <hock.leong.kweh@intel.com>

I am going to submit V3.

> ---
> drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 8 +++++++-
> 1 file changed, 7 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> index 92ac006..4df555e 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> @@ -3345,8 +3345,14 @@ int stmmac_dvr_probe(struct device *device,
> ndev->max_mtu = JUMBO_LEN;
> else
> ndev->max_mtu = SKB_MAX_HEAD(NET_SKB_PAD +
> NET_IP_ALIGN);
> - if (priv->plat->maxmtu < ndev->max_mtu)
> +
> + if ((priv->plat->maxmtu < ndev->max_mtu) &&
> + (priv->plat->maxmtu >= ndev->min_mtu))
> ndev->max_mtu = priv->plat->maxmtu;
> + else if (priv->plat->maxmtu != 0)
> + netdev_warn(priv->dev,
> + "%s: warning: maxmtu having invalid value (%d)\n",
> + __func__, priv->plat->maxmtu);
>
> if (flow_ctrl)
> priv->flow_ctrl = FLOW_AUTO; /* RX/TX pause on */
> --
> 1.7.9.5

\
 
 \ /
  Last update: 2017-01-06 16:56    [W:0.093 / U:0.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site