lkml.org 
[lkml]   [2017]   [Jan]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: eMMC boot problem: switch to bus width 8 ddr failed
From
Date
On 2017/1/6 8:41, Clemens Gruber wrote:
> Hi,
>
> with the current mainline 4.10-rc2 kernel, I can no longer boot from
> the eMMC on my i.MX6Q board.
>
> Details:
> The eMMC is a Micron MTFC4GACAJCN-1M WT but as the i.MX6Q only supports
> eMMC 4.41 features and we did not implement voltage switching from 3.3V
> to 1.8V or lower, I did add no-1-8-v; (but none of the mmc-ddr or mmc-hs
> options) to the device tree. The bus-width is 8.
>
> With 4.9 the board booted fine, now with the current mainline 4.10 tree,
> I get the following (repeating) errors at boot:
>
> [ 4.326834] Waiting for root device /dev/mmcblk0p2...
> [ 14.563861] mmc0: Timeout waiting for hardware cmd interrupt.
> [ 14.569619] sdhci: =========== REGISTER DUMP (mmc0)===========
> [ 14.575461] sdhci: Sys addr: 0x4e726000 | Version: 0x00000002
> [ 14.581300] sdhci: Blk size: 0x00000200 | Blk cnt: 0x00000001
> [ 14.587140] sdhci: Argument: 0x00010000 | Trn mode: 0x00000013
> [ 14.592979] sdhci: Present: 0x01fd8009 | Host ctl: 0x00000031
> [ 14.598816] sdhci: Power: 0x00000002 | Blk gap: 0x00000080
> [ 14.604654] sdhci: Wake-up: 0x00000008 | Clock: 0x0000001f
> [ 14.610493] sdhci: Timeout: 0x0000008f | Int stat: 0x00000000
> [ 14.616332] sdhci: Int enab: 0x107f100b | Sig enab: 0x107f100b
> [ 14.622168] sdhci: AC12 err: 0x00000000 | Slot int: 0x00000003
> [ 14.628007] sdhci: Caps: 0x07eb0000 | Caps_1: 0x0000a007
> [ 14.633845] sdhci: Cmd: 0x00000d1a | Max curr: 0x00ffffff
> [ 14.639682] sdhci: Host ctl2: 0x00000000
> [ 14.643611] sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x4e6f7208
> [ 14.649447] sdhci: ===========================================
>
> This repeats a few times, then more information is shown at the bottom:
>
> [ 86.893859] mmc0: Timeout waiting for hardware cmd interrupt.
> [ 86.899615] sdhci: =========== REGISTER DUMP (mmc0)===========
> [ 86.905453] sdhci: Sys addr: 0x00000000 | Version: 0x00000002
> [ 86.911291] sdhci: Blk size: 0x00000200 | Blk cnt: 0x00000001
> [ 86.917129] sdhci: Argument: 0x00010000 | Trn mode: 0x00000013
> [ 86.922967] sdhci: Present: 0x01fd8009 | Host ctl: 0x00000031
> [ 86.928804] sdhci: Power: 0x00000002 | Blk gap: 0x00000080
> [ 86.934642] sdhci: Wake-up: 0x00000008 | Clock: 0x0000001f
> [ 86.940479] sdhci: Timeout: 0x0000008f | Int stat: 0x00000000
> [ 86.946316] sdhci: Int enab: 0x107f100b | Sig enab: 0x107f100b
> [ 86.952154] sdhci: AC12 err: 0x00000000 | Slot int: 0x00000003
> [ 86.957992] sdhci: Caps: 0x07eb0000 | Caps_1: 0x0000a007
> [ 86.963830] sdhci: Cmd: 0x00000d1a | Max curr: 0x00ffffff
> [ 86.969668] sdhci: Host ctl2: 0x00000000
> [ 86.973596] sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x00000000
> [ 86.979433] sdhci: ===========================================
> [ 86.986356] mmc0: switch to bus width 8 ddr failed
> [ 86.991163] mmc0: error -110 whilst initialising MMC card
> [ 97.773859] mmc0: Timeout waiting for hardware cmd interrupt.
>
> --
>
> After looking through the latest commits to mmc/core, I found the
> culprit:
> Commit e173f8911f091fa50ccf8cc1fa316dd5569bc470 ("mmc: core: Update
> CMD13 polling policy when switch to HS DDR mode")
>
> Reverting it fixes the problem. But I am unsure if that's the right
> course of action?
>
> Feel free to send me patches for testing!
>

I just look into both of sdhci and sdhci-esdhc-imx again, and seems the
code miss a bit, so could you also try this one?

drivers/mmc/core/mmc_ops.c
@@ -486,7 +486,8 @@ static int mmc_poll_for_busy(struct mmc_card *card,
unsigned int timeout_ms,
busy = host->ops->card_busy(host);
} else {
err = mmc_send_status(card, &status);
- if (retry_crc_err && err == -EILSEQ) {
+ if (retry_crc_err && (err == -EILSEQ ||
+ err == -ETIMEDOUT)) {
busy = true;
} else if (err) {
return err;




> Regards,
> Clemens
> --
> To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>


--
Best Regards
Shawn Lin

\
 
 \ /
  Last update: 2017-01-06 04:02    [W:0.335 / U:0.048 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site