lkml.org 
[lkml]   [2017]   [Jan]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2,9/9] irqchip/ls-scfg-msi: add MSI affinity support
From
Date
On 05/01/17 08:10, Minghuan Lian wrote:
> For LS1046a and LS1043a v1.1, the MSI controller has 4 MSIRs and 4
> CPUs. A GIC SPI interrupt of MSIR can be associated with a CPU.
> When changing MSI interrupt affinity, this MSI will be moved to the
> corresponding MSIR and MSI message data will be changed according to
> MSIR. when requesting a MSI, the bits of all 4 MSIR will be reserved.
> The parameter 'msi_affinity_flag' is provide to change this mode.
> "lsmsi=no-affinity" will disable affinity, all MSI can only be
> associated with CPU 0.
>
> Signed-off-by: Minghuan Lian <Minghuan.Lian@nxp.com>
> ---
> v2-v1:
> - None
>
> drivers/irqchip/irq-ls-scfg-msi.c | 75 ++++++++++++++++++++++++++++++++++++---
> 1 file changed, 70 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/irqchip/irq-ls-scfg-msi.c b/drivers/irqchip/irq-ls-scfg-msi.c
> index dc19569..753fe39 100644
> --- a/drivers/irqchip/irq-ls-scfg-msi.c
> +++ b/drivers/irqchip/irq-ls-scfg-msi.c
> @@ -40,6 +40,7 @@ struct ls_scfg_msir {
> unsigned int gic_irq;
> unsigned int bit_start;
> unsigned int bit_end;
> + unsigned int srs; /* Shared interrupt register select */
> void __iomem *reg;
> };
>
> @@ -70,6 +71,19 @@ struct ls_scfg_msi {
> .chip = &ls_scfg_msi_irq_chip,
> };
>
> +static int msi_affinity_flag = 1;
> +
> +static int __init early_parse_ls_scfg_msi(char *p)
> +{
> + if (p && strncmp(p, "no-affinity", 11) == 0)
> + msi_affinity_flag = 0;
> + else
> + msi_affinity_flag = 1;
> +
> + return 0;
> +}
> +early_param("lsmsi", early_parse_ls_scfg_msi);

What is the point of this option? If feels like an unnecessary complexity.

> +
> static void ls_scfg_msi_compose_msg(struct irq_data *data, struct msi_msg *msg)
> {
> struct ls_scfg_msi *msi_data = irq_data_get_irq_chip_data(data);
> @@ -77,12 +91,43 @@ static void ls_scfg_msi_compose_msg(struct irq_data *data, struct msi_msg *msg)
> msg->address_hi = upper_32_bits(msi_data->msiir_addr);
> msg->address_lo = lower_32_bits(msi_data->msiir_addr);
> msg->data = data->hwirq;
> +
> + if (msi_affinity_flag) {
> + u32 msir_index;
> +
> + msir_index = cpumask_first(data->common->affinity);
> + if (msir_index >= msi_data->msir_num)
> + msir_index = 0;

How can this happen?

> +
> + msg->data |= msir_index;

How do you guarantee that the low bits were clear? Please document the
way you encode your MSI payload.

> + }
> }
>
> static int ls_scfg_msi_set_affinity(struct irq_data *irq_data,
> const struct cpumask *mask, bool force)
> {
> - return -EINVAL;
> + struct ls_scfg_msi *msi_data = irq_data_get_irq_chip_data(irq_data);
> + u32 cpu;
> +
> + if (!msi_affinity_flag)
> + return -EINVAL;
> +
> + if (!force)
> + cpu = cpumask_any_and(mask, cpu_online_mask);
> + else
> + cpu = cpumask_first(mask);
> +
> + if (cpu >= msi_data->msir_num)
> + return -EINVAL;
> +
> + if (msi_data->msir[cpu].gic_irq <= 0) {
> + pr_warn("cannot bind the irq to cpu%d\n", cpu);

Please don't. Returning an error is enough. If you really want to have
something, turn it into a proper debug message.

> + return -EINVAL;
> + }
> +
> + cpumask_copy(irq_data->common->affinity, mask);
> +
> + return IRQ_SET_MASK_OK;
> }
>
> static struct irq_chip ls_scfg_msi_parent_chip = {
> @@ -158,7 +203,7 @@ static void ls_scfg_msi_irq_handler(struct irq_desc *desc)
>
> for_each_set_bit_from(pos, &val, size) {
> hwirq = ((msir->bit_end - pos) << msi_data->cfg->ibs_shift) |
> - msir->index;
> + msir->srs;
> virq = irq_find_mapping(msi_data->parent, hwirq);
> if (virq)
> generic_handle_irq(virq);
> @@ -221,10 +266,19 @@ static int ls_scfg_msi_setup_hwirq(struct ls_scfg_msi *msi_data, int index)
> ls_scfg_msi_irq_handler,
> msir);
>
> + if (msi_affinity_flag) {
> + /* Associate MSIR interrupt to the cpu */
> + irq_set_affinity(msir->gic_irq, get_cpu_mask(index));
> + msir->srs = 0; /* This value is determined by the CPU */
> + } else
> + msir->srs = index;
> +
> /* Release the hwirqs corresponding to this MSIR */
> - for (i = 0; i < msi_data->cfg->msir_irqs; i++) {
> - hwirq = i << msi_data->cfg->ibs_shift | msir->index;
> - bitmap_clear(msi_data->used, hwirq, 1);
> + if (!msi_affinity_flag || msir->index == 0) {
> + for (i = 0; i < msi_data->cfg->msir_irqs; i++) {
> + hwirq = i << msi_data->cfg->ibs_shift | msir->index;
> + bitmap_clear(msi_data->used, hwirq, 1);
> + }
> }
>
> return 0;
> @@ -316,6 +370,17 @@ static int ls_scfg_msi_probe(struct platform_device *pdev)
> bitmap_set(msi_data->used, 0, msi_data->irqs_num);
>
> msi_data->msir_num = of_irq_count(pdev->dev.of_node);
> +
> + if (msi_affinity_flag) {
> + u32 cpu_num;
> +
> + cpu_num = num_possible_cpus();
> + if (msi_data->msir_num >= cpu_num)
> + msi_data->msir_num = cpu_num;
> + else
> + msi_affinity_flag = 0;
> + }
> +
> msi_data->msir = devm_kcalloc(&pdev->dev, msi_data->msir_num,
> sizeof(*msi_data->msir),
> GFP_KERNEL);
>

This is a very confusing patch. Please get rid of this useless option
and document how you encode the routing in the hwirq.

Thanks,

M.
--
Jazz is not dead. It just smells funny...

\
 
 \ /
  Last update: 2017-01-05 18:06    [W:1.538 / U:0.104 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site