lkml.org 
[lkml]   [2017]   [Jan]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 1/2] arm64: dma_mapping: allow PCI host driver to limit DMA mask
From
Date
>> For OF platforms, this is called via of_dma_configure(), that checks
>> dma-ranges of node that is *parent* for host bridge. Host bridge
>> currently does not control this at all.
>
> We need to think about this a bit. Is it actually the PCI host
> bridge that limits the ranges here, or the bus that it is connected
> to. In the latter case, the caller needs to be adapted to handle
> both.

In r-car case, I'm not sure what is the source of limitation at physical
level.

pcie-rcar driver configures ranges for PCIe inbound transactions based
on dma-ranges property in it's device tree node. In the current device
tree for this platform, that only contains one range and it is in lower
memory.

NVMe driver tries i/o to kmalloc()ed area. That returns 0x5xxxxxxxx
addresses here. As a quick experiment, I tried to add second range to
pcie-rcar's dma-ranges to cover 0x5xxxxxxxx area - but that did not make
DMA to high addresses working.

My current understanding is that host bridge hardware module can't
handle inbound transactions to PCI addresses above 4G - and this
limitations comes from host bridge itself.

I've read somewhere in the lists that pcie-rcar hardware is "32-bit" -
but I don't remember where, and don't know lowlevel details. Maybe
somebody from linux-renesas can elaborate?


>> In current device trees no dma-ranges is defined for nodes that are
>> parents to pci host bridges. This will make of_dma_configure() to fall
>> back to 32-bit size for all devices on all current platforms. Thus
>> applying this patch will immediately break 64-bit dma masks on all
>> hardware that supports it.
>
> No, it won't break it, it will just fall back to swiotlb for all the
> ones that are lacking the dma-ranges property. I think this is correct
> behavior.

I'd say - for all ones that have parents without dma-ranges property.

As of 4.10-rc2, I see only two definitions of wide parent dma-ranges
under arch/arm64/boot/dts/ - in amd/amd-seattle-soc.dtsi and
apm/apm-storm.dtsi

Are these the only arm64 platforms that can to DMA to high addresses?
I'm not arm64 expert but I'd be surprised if that's the case.


>> Also related: dma-ranges property used by several pci host bridges is
>> *not* compatible with "legacy" dma-ranges parsed by of_get_dma_range() -
>> former uses additional flags word at beginning.
>
> Can you elaborate? Do we have PCI host bridges that use wrongly formatted
> dma-ranges properties?

of_dma_get_range() expects <dma_addr cpu_addr size> format.

pcie-rcar.c, pci-rcar-gen2.c, pci-xgene.c and pcie-iproc.c from
drivers/pci/host/ all parse dma-ranges using of_pci_range_parser that
uses <flags pci-addr cpu-addr size> format - i.e. something different
from what of_dma_get_range() uses.


Nikita

\
 
 \ /
  Last update: 2017-01-04 15:34    [W:0.124 / U:0.164 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site