lkml.org 
[lkml]   [2017]   [Jan]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH 2/2] PCI: lock each enable/disable num_vfs operation in sysfs
On Wed, Jan 04, 2017 at 04:00:20PM +0000, Tantilov, Emil S wrote:
>>On Tue, Jan 03, 2017 at 04:48:31PM -0800, Emil Tantilov wrote:
>>>Enabling/disabling SRIOV via sysfs by echo-ing multiple values
>>>simultaneously:
>>>
>>>echo 63 > /sys/class/net/ethX/device/sriov_numvfs&
>>>echo 63 > /sys/class/net/ethX/device/sriov_numvfs
>>>
>>>sleep 5
>>>
>>>echo 0 > /sys/class/net/ethX/device/sriov_numvfs&
>>>echo 0 > /sys/class/net/ethX/device/sriov_numvfs
>>>
>>>Results in the following bug:
>>>
>>>kernel BUG at drivers/pci/iov.c:495!
>>>invalid opcode: 0000 [#1] SMP
>>>CPU: 1 PID: 8050 Comm: bash Tainted: G W 4.9.0-rc7-net-next #2092
>>>RIP: 0010:[<ffffffff813b1647>]
>>> [<ffffffff813b1647>] pci_iov_release+0x57/0x60
>>>
>>>Call Trace:
>>> [<ffffffff81391726>] pci_release_dev+0x26/0x70
>>> [<ffffffff8155be6e>] device_release+0x3e/0xb0
>>> [<ffffffff81365ee7>] kobject_cleanup+0x67/0x180
>>> [<ffffffff81365d9d>] kobject_put+0x2d/0x60
>>> [<ffffffff8155bc27>] put_device+0x17/0x20
>>> [<ffffffff8139c08a>] pci_dev_put+0x1a/0x20
>>> [<ffffffff8139cb6b>] pci_get_dev_by_id+0x5b/0x90
>>> [<ffffffff8139cca5>] pci_get_subsys+0x35/0x40
>>> [<ffffffff8139ccc8>] pci_get_device+0x18/0x20
>>> [<ffffffff8139ccfb>] pci_get_domain_bus_and_slot+0x2b/0x60
>>> [<ffffffff813b09e7>] pci_iov_remove_virtfn+0x57/0x180
>>> [<ffffffff813b0b95>] pci_disable_sriov+0x65/0x140
>>> [<ffffffffa00a1af7>] ixgbe_disable_sriov+0xc7/0x1d0 [ixgbe]
>>> [<ffffffffa00a1e9d>] ixgbe_pci_sriov_configure+0x3d/0x170 [ixgbe]
>>> [<ffffffff8139d28c>] sriov_numvfs_store+0xdc/0x130
>>>...
>>>RIP [<ffffffff813b1647>] pci_iov_release+0x57/0x60
>>>
>>>Use the existing mutex lock to protect each enable/disable operation.
>>>
>>>CC: Alexander Duyck <alexander.h.duyck@intel.com>
>>>Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
>>
>>Emil, It's going to change semantics of pci_enable_sriov() and pci_disable_sriov().
>>They can be invoked when writing to the sysfs entry, or loading PF's
>>driver. With the change applied, the lock (pf->sriov->lock) isn't acquired and released
>>in the PF's driver loading path.
>
>The enablement of SRIOV on driver load is done via deprecated module parameter.
>Perhaps we can just remove it, although there are probably still people that use it
>and may not be happy if we get rid of it.
>

Yeah, some drivers are still using the interface. So we cannot affect it until
it can be droped.

>>I think the reasonable way would be adding a flag in "struct sriov", to
>>indicate someone is accessing the IOV capability through sysfs file. With this, the
>>code returns with "-EBUSY" immediately for contenders. With it, nothing is going
>>to be changed in PF's driver loading path.
>
>Flag is what I initially had in mind, but did not want to add extra locking if we
>can make use of the existing.
>

The problem is sriov->lock wasn't introduced to protect the whole IOV capability.
Instead, it protects the allocation of virtual bus (if needed). In your patch,
it will be used to protect the whole IOV capability, ensure accessing the IOV
capability exclusively. So the usage of this lock is changed.

code extracted from pci.h:

struct pci_sriov {
:
struct mutex lock; /* lock for VF bus */
:
}

The lock was introduced by commit d1b054da8 ("PCI: initialize and release SR-IOV
capability"). If I'm correct enough, I don't think this lock is needed when
pci_enable_sriov() or pci_disable_sriov() are called in driver because of module
parameters. I don't see the usage case calling pci_disable_sriov() while previous
pci_enable_sriov() isn't finished yet. Also, it's not needed in EEH subsystem.
So I think the lock can be dropped, then it can be used to protect sysfs path.

>>Also, there are some minor comments as below and I guess most of them won't
>>be applied if you take my suggestion eventually. However, I'm trying to make
>>the comments complete.
>
>Thanks a lot for reviewing!
>
>>
>>>---
>>> drivers/pci/pci-sysfs.c | 24 +++++++++++++++++-------
>>> 1 file changed, 17 insertions(+), 7 deletions(-)
>>>
>>>diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c
>>>index 0666287..5b54cf5 100644
>>>--- a/drivers/pci/pci-sysfs.c
>>>+++ b/drivers/pci/pci-sysfs.c
>>>@@ -472,7 +472,9 @@ static ssize_t sriov_numvfs_store(struct device *dev,
>>> const char *buf, size_t count)
>>> {
>>> struct pci_dev *pdev = to_pci_dev(dev);
>>>+ struct pci_sriov *iov = pdev->sriov;
>>> int ret;
>>>+
>>
>>Unnecessary change.
>>
>>> u16 num_vfs;
>>>
>>> ret = kstrtou16(buf, 0, &num_vfs);
>>>@@ -482,38 +484,46 @@ static ssize_t sriov_numvfs_store(struct device
>>*dev,
>>> if (num_vfs > pci_sriov_get_totalvfs(pdev))
>>> return -ERANGE;
>>>
>>>+ mutex_lock(&iov->dev->sriov->lock);
>>>+
>>> if (num_vfs == pdev->sriov->num_VFs)
>>>- return count; /* no change */
>>>+ goto exit;
>>>
>>> /* is PF driver loaded w/callback */
>>> if (!pdev->driver || !pdev->driver->sriov_configure) {
>>> dev_info(&pdev->dev, "Driver doesn't support SRIOV
>>configuration via sysfs\n");
>>>- return -ENOSYS;
>>>+ ret = -EINVAL;
>>>+ goto exit;
>>
>>Why we need change the error code here?
>
>checkpatch was complaining about the use of the ENOSYS error code being specific
>and even though it was not my patch introducing it I had to change it to shut it up.
>

Right, it's reserved for attempt to call nonexisting syscall, but I think ENOENT
might be more indicative than EINVAL in this specific case?

>>> }
>>>
>>> if (num_vfs == 0) {
>>> /* disable VFs */
>>> ret = pdev->driver->sriov_configure(pdev, 0);
>>>- if (ret < 0)
>>>- return ret;
>>>- return count;
>>>+ goto exit;
>>> }
>>>
>>> /* enable VFs */
>>> if (pdev->sriov->num_VFs) {
>>> dev_warn(&pdev->dev, "%d VFs already enabled. Disable before enabling %d VFs\n",
>>> pdev->sriov->num_VFs, num_vfs);
>>>- return -EBUSY;
>>>+ ret = -EBUSY;
>>>+ goto exit;
>>> }
>>>
>>> ret = pdev->driver->sriov_configure(pdev, num_vfs);
>>> if (ret < 0)
>>>- return ret;
>>>+ goto exit;
>>>
>>> if (ret != num_vfs)
>>> dev_warn(&pdev->dev, "%d VFs requested; only %d enabled\n",
>>> num_vfs, ret);
>>>
>>>+exit:
>>>+ mutex_unlock(&iov->dev->sriov->lock);
>>>+
>>>+ if (ret < 0)
>>>+ return ret;
>>>+
>>> return count;
>>
>>The code might be clearer if @ret is returned here. In that case, We need
>>set it properly in error paths.
>
>I played with different ways to handle this and this seemed the least intrusive.
>

Ok, both should be fine.

Thanks,
Gavin

\
 
 \ /
  Last update: 2017-01-05 00:13    [W:0.155 / U:0.292 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site