lkml.org 
[lkml]   [2017]   [Jan]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 03/10] dt-bindings: perf: hisi: Add Devicetree bindings for Hisilicon SoC PMU
On Mon, Jan 02, 2017 at 01:49:21AM -0500, Anurup M wrote:
> 1) Device tree bindings for Hisilicon SoC PMU.
> 2) Add example for Hisilicon L3 cache and MN PMU.
> 3) Add child nodes of L3C and MN in djtag bindings example.
>
> Signed-off-by: Anurup M <anurup.m@huawei.com>
> Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
> ---
> .../devicetree/bindings/arm/hisilicon/djtag.txt | 25 ++++++
> .../devicetree/bindings/arm/hisilicon/pmu.txt | 100 +++++++++++++++++++++
> 2 files changed, 125 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/arm/hisilicon/pmu.txt
>
> diff --git a/Documentation/devicetree/bindings/arm/hisilicon/djtag.txt b/Documentation/devicetree/bindings/arm/hisilicon/djtag.txt
> index bbe8b45..653fdb7 100644
> --- a/Documentation/devicetree/bindings/arm/hisilicon/djtag.txt
> +++ b/Documentation/devicetree/bindings/arm/hisilicon/djtag.txt
> @@ -27,6 +27,31 @@ Example 1: Djtag for CPU die
> hisi-scl-id = <0x02>;
>
> /* All connecting components will appear as child nodes */
> +
> + pmul3c0 {
> + compatible = "hisilicon,hip05-pmu-l3c-v1";
> + hisi-module-id = <0x04 0x02>;
> + };
> +
> + pmul3c1 {
> + compatible = "hisilicon,hip05-pmu-l3c-v1";
> + hisi-module-id = <0x04 0x04>;
> + };
> +
> + pmul3c2 {
> + compatible = "hisilicon,hip05-pmu-l3c-v1";
> + hisi-module-id = <0x04 0x01>;
> + };
> +
> + pmul3c3 {
> + compatible = "hisilicon,hip05-pmu-l3c-v1";
> + hisi-module-id = <0x04 0x08>;
> + };
> +
> + pmumn0 {
> + compatible = "hisilicon,hip05-pmu-mn-v1";
> + hisi-module-id = <0x0b>;
> + };
> };
>
> Example 2: Djtag for IO die
> diff --git a/Documentation/devicetree/bindings/arm/hisilicon/pmu.txt b/Documentation/devicetree/bindings/arm/hisilicon/pmu.txt
> new file mode 100644
> index 0000000..fceef8d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/arm/hisilicon/pmu.txt
> @@ -0,0 +1,100 @@
> +Hisilicon SoC HiP05/06/07 ARMv8 PMU
> +===================================
> +
> +The Hisilicon SoC chips like HiP05/06/07 etc. consist of various independent
> +system device PMUs such as L3 cache (L3C) and Miscellaneous Nodes(MN). These
> +PMU devices are independent and have hardware logic to gather statistics and
> +performance information.
> +
> +HiSilicon SoC chip is encapsulated by multiple CPU and IO dies. The CPU die
> +is called as Super CPU cluster (SCCL) which includes 16 cpu-cores. Every SCCL
> +in HiP05/06/07 chips are further grouped as CPU clusters (CCL) which includes
> +4 cpu-cores each.
> +e.g. In the case of HiP05/06/07, each SCCL has 1 L3 cache and 1 MN PMU device.
> +The L3 cache is further grouped as 4 L3 cache banks in a SCCL.
> +
> +The Hisilicon SoC PMU DT node bindings for uncore PMU devices are as below.
> +For PMU devices like L3 cache. MN etc. which are accessed using the djtag,
> +the parent node will be the djtag node of the corresponding CPU die (SCCL).
> +
> +L3 cache
> +---------
> +The L3 cache is dedicated for each SCCL. Each SCCL in HiP05/06/07 chips have 4
> +L3 cache banks. Each L3 cache bank have separate DT nodes.
> +
> +Required properties:
> +
> + - compatible : This value should be as follows
> + (a) "hisilicon,hip05-pmu-l3c-v1" for v1 hw in HiP05 chipset
> + (b) "hisilicon,hip06-pmu-l3c-v1" for v1 hw in HiP06 chipset
> + (c) "hisilicon,hip07-pmu-l3c-v2" for v2 hw in HiP07 chipset
> +
> + - hisi-module-id : This property is a combination of two values in the below order.

Vendor prefix: hisilicon,module-id

> + a) Module ID: The module identifier for djtag.
> + b) Instance or Bank ID: This will identify the L3 cache bank
> + or instance.
> +
> +Optional properties:
> +
> + - interrupt-parent : A phandle indicating which interrupt controller
> + this PMU signals interrupts to.
> +
> + - interrupts : Interrupt line used by this L3 cache bank.
> +
> + *The counter overflow IRQ is not supported in v1 hardware (HiP05/06).
> +
> +Miscellaneous Node
> +------------------
> +The MN is dedicated for each SCCL and hence there are separate DT nodes for MN
> +for each SCCL.
> +
> +Required properties:
> +
> + - compatible : This value should be as follows
> + (a) "hisilicon,hip05-pmu-mn-v1" for v1 hw in HiP05 chipset
> + (b) "hisilicon,hip06-pmu-mn-v1" for v1 hw in HiP06 chipset
> + (c) "hisilicon,hip07-pmu-mn-v2" for v2 hw in HiP07 chipset
> +
> + - hisi-module-id : Module ID to input for djtag.

ditto

> +
> +Optional properties:
> +
> + - interrupt-parent : A phandle indicating which interrupt controller
> + this PMU signals interrupts to.
> +
> + - interrupts : Interrupt line used by this PMU.
> +
> + *The counter overflow IRQ is not supported in v1 hardware (HiP05/06).
> +
> +Example:
> +
> + djtag0: djtag@80010000 {
> + compatible = "hisilicon,hip05-djtag-v1";
> + reg = <0x0 0x80010000 0x0 0x10000>;
> + scl-id = <0x02>;
> +
> + pmul3c0 {
> + compatible = "hisilicon,hip05-pmu-l3c-v1";
> + hisi-module-id = <0x04 0x02>;
> + };
> +
> + pmul3c1 {
> + compatible = "hisilicon,hip05-pmu-l3c-v1";
> + hisi-module-id = <0x04 0x04>;
> + };
> +
> + pmul3c2 {
> + compatible = "hisilicon,hip05-pmu-l3c-v1";
> + hisi-module-id = <0x04 0x01>;
> + };
> +
> + pmul3c3 {
> + compatible = "hisilicon,hip05-pmu-l3c-v1";
> + hisi-module-id = <0x04 0x08>;
> + };
> +
> + pmumn0 {
> + compatible = "hisilicon,hip05-pmu-mn-v1";
> + hisi-module-id = <0x0b>;
> + };
> + };
> --
> 2.1.4
>

\
 
 \ /
  Last update: 2017-01-03 23:59    [W:0.050 / U:0.288 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site