lkml.org 
[lkml]   [2017]   [Jan]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 13/24] drm/rockchip: dw-mipi-dsi: fix escape clock rate
Date
This clock rate is derived from the PHY PLL, so it should be calculated
dynamically. Use the same calculation as the vendor kernel to derive
the escape clock speed.

Signed-off-by: John Keeping <john@metanate.com>
Reviewed-by: Chris Zhong <zyw@rock-chips.com>
---
v3:
- Improve the commit message a bit
- Add Chris' Reviewed-by
Unchanged in v2

drivers/gpu/drm/rockchip/dw-mipi-dsi.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/rockchip/dw-mipi-dsi.c b/drivers/gpu/drm/rockchip/dw-mipi-dsi.c
index 290282e86d16..c2e0ba96e0a0 100644
--- a/drivers/gpu/drm/rockchip/dw-mipi-dsi.c
+++ b/drivers/gpu/drm/rockchip/dw-mipi-dsi.c
@@ -710,11 +710,13 @@ static void dw_mipi_dsi_disable(struct dw_mipi_dsi *dsi)

static void dw_mipi_dsi_init(struct dw_mipi_dsi *dsi)
{
+ u32 esc_clk_division = (dsi->lane_mbps >> 3) / 20 + 1;
+
dsi_write(dsi, DSI_PWR_UP, RESET);
dsi_write(dsi, DSI_PHY_RSTZ, PHY_DISFORCEPLL | PHY_DISABLECLK
| PHY_RSTZ | PHY_SHUTDOWNZ);
dsi_write(dsi, DSI_CLKMGR_CFG, TO_CLK_DIVIDSION(10) |
- TX_ESC_CLK_DIVIDSION(7));
+ TX_ESC_CLK_DIVIDSION(esc_clk_division));
}

static void dw_mipi_dsi_dpi_config(struct dw_mipi_dsi *dsi,
--
2.11.0.197.gb556de5.dirty
\
 
 \ /
  Last update: 2017-01-29 15:48    [W:0.417 / U:0.488 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site