lkml.org 
[lkml]   [2017]   [Jan]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCHv5 0/5] Support for Marvell switches with integrated CPUs
Date
Hi all,

On ven., janv. 27 2017, Chris Packham <chris.packham@alliedtelesis.co.nz> wrote:

> The 98DX3236, 98DX3336 and 98DX4251 are a set of switch ASICs with
> integrated CPUs. They CPU block is common within these product lines and
> (as far as I can tell/have been told) is based on the Armada XP. There
> are a few differences due to the fact they have to squeeze the CPU into
> the same package as the switch.
>
> I've rebased this series against linux-pinctrl/devel to get access to
> mvebu_mmio_mpp_ctrl. Everything else still applies cleanly to
> v4.10.0-rc5.

Just to let you know that I plan to apply the 3 arm patch once Chris
will have sent the new series with the minor fixes I asked on patch 3.

I already applied them in the for-next branch to benefit of some build
test coverage.

Stephen,

you gave your Acked-by on the first patch, but don't you plan to apply
it on the clk branch?

If you really want I can apply on mvebu but there is no build
dependencies, so the order the patches will be merged is not important.

Linus,

I expect you will apply the pinctrl patch on your tree as it depend of
code already there.

Thanks,

Gregory

>
> Chris Packham (4):
> clk: mvebu: support for 98DX3236 SoC
> Changes in v2:
> - Update devicetree binding documentation for new compatible string
> Changes in v3:
> - Add 98dx3236 support to mvebu/clk-corediv.c rather than creating a new
> driver.
> - Document mv98dx3236-corediv-clock binding
> Changes in v4:
> - None
> Changes in v5:
> - Collect ack from Rob
> - Remove explicit initialisation of fields to 0 in mv98dx3236_coreclks
> - Register dummy clock provider for marvell,mv98dx3236-cpu-clock
> arm: mvebu: support for SMP on 98DX3336 SoC
> Changes in v2:
> - Document new enable-method value
> - Correct some references from 98DX4521 to 98DX3236
> Changes in v3:
> - Simplify mv98dx3236_resume_init by using of_io_request_and_map()
> Changes in v4:
> - integrate changes into platsmp.c instead of new init call
> - avoid duplicated code.
> - fix error return
> - Collect ack from Rob
> Changes in v5:
> - Remove useless casts (thanks to Stephen Boyd)
> arm: mvebu: Add device tree for 98DX3236 SoCs
> Changes in v2:
> - Update devicetree binding documentation to reflect that 98DX3336 and
> 984251 are supersets of 98DX3236.
> - disable crypto block
> - disable sdio for 98DX3236, enable for 98DX4251
> Changes in v3:
> - fix typo 4521 -> 4251
> - document prestera bindings
> - rework corediv-clock binding
> - add label to packet processor node
> - add new compatible string for DFX server
> Changes in v4:
> - Collect ack from Rob
> Changes in v5:
> - Fixup license text. Add labels to nodes.
> arm: mvebu: Add device tree for db-dxbc2 and db-xc3-24g4xg boards
> Changes in v5:
> - update license text
> - use node labels
>
> Kalyan Kinthada (1):
> pinctrl: mvebu: pinctrl driver for 98DX3236 SoC
> Changes in v2:
> - include sdio support for the 98DX4251
> Changes in v3:
> - None
> Changes in v4:
> - Correct some discrepencies between binding and driver.
> - Collect acks from Rob and Sebastian
> Changes in v5:
> - Update bindings to reflect "gpo" pins
> - Use mvebu_mmio_mpp_ctrl instead of armada_xp_mpp_ctrl (note this is reliant
> on changes queued in linux-pinctrl)
>
> Documentation/devicetree/bindings/arm/cpus.txt | 1 +
> .../bindings/arm/marvell/98dx3236-resume-ctrl.txt | 16 ++
> .../devicetree/bindings/arm/marvell/98dx3236.txt | 23 ++
> .../bindings/clock/mvebu-corediv-clock.txt | 1 +
> .../devicetree/bindings/clock/mvebu-cpu-clock.txt | 1 +
> .../devicetree/bindings/net/marvell,prestera.txt | 50 ++++
> .../pinctrl/marvell,armada-98dx3236-pinctrl.txt | 46 ++++
> arch/arm/boot/dts/armada-xp-98dx3236.dtsi | 254 +++++++++++++++++++++
> arch/arm/boot/dts/armada-xp-98dx3336.dtsi | 76 ++++++
> arch/arm/boot/dts/armada-xp-98dx4251.dtsi | 90 ++++++++
> arch/arm/boot/dts/db-dxbc2.dts | 151 ++++++++++++
> arch/arm/boot/dts/db-xc3-24g4xg.dts | 142 ++++++++++++
> arch/arm/mach-mvebu/platsmp.c | 86 +++++++
> drivers/clk/mvebu/armada-xp.c | 39 ++++
> drivers/clk/mvebu/clk-corediv.c | 23 ++
> drivers/clk/mvebu/clk-cpu.c | 8 +
> drivers/pinctrl/mvebu/pinctrl-armada-xp.c | 156 +++++++++++++
> 17 files changed, 1163 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/arm/marvell/98dx3236-resume-ctrl.txt
> create mode 100644 Documentation/devicetree/bindings/arm/marvell/98dx3236.txt
> create mode 100644 Documentation/devicetree/bindings/net/marvell,prestera.txt
> create mode 100644 Documentation/devicetree/bindings/pinctrl/marvell,armada-98dx3236-pinctrl.txt
> create mode 100644 arch/arm/boot/dts/armada-xp-98dx3236.dtsi
> create mode 100644 arch/arm/boot/dts/armada-xp-98dx3336.dtsi
> create mode 100644 arch/arm/boot/dts/armada-xp-98dx4251.dtsi
> create mode 100644 arch/arm/boot/dts/db-dxbc2.dts
> create mode 100644 arch/arm/boot/dts/db-xc3-24g4xg.dts
>
> interdiff to v4:
>
> diff --git a/Documentation/devicetree/bindings/clock/mvebu-corediv-clock.txt b/Documentation/devicetree/bindings/clock/mvebu-corediv-clock.txt
> index 520562a7dc2a..c7b4e3a6b2c6 100644
> @@ -85,7 +86,7 @@
> by address and length of the PMU DFS registers
> - #clock-cells : should be set to 1.
> diff --git a/drivers/clk/mvebu/armada-xp.c b/drivers/clk/mvebu/armada-xp.c
> -index b3094315a3c0..0413bf8284e0 100644
> +index b3094315a3c0..890a863ae0d0 100644
> --- a/drivers/clk/mvebu/armada-xp.c
> +++ b/drivers/clk/mvebu/armada-xp.c
> return 250000000;
> @@ -118,9 +119,6 @@
> +static const struct coreclk_soc_desc mv98dx3236_coreclks = {
> + .get_tclk_freq = mv98dx3236_get_tclk_freq,
> + .get_cpu_freq = mv98dx3236_get_cpu_freq,
> -+ .get_clk_ratio = NULL,
> -+ .ratios = NULL,
> -+ .num_ratios = 0,
> +};
> +
> /*
> @@ -200,53 +198,16 @@
> +CLK_OF_DECLARE(mv98dx3236_corediv_clk, "marvell,mv98dx3236-corediv-clock",
> + mv98dx3236_corediv_clk_init);
> diff --git a/drivers/clk/mvebu/clk-cpu.c b/drivers/clk/mvebu/clk-cpu.c
> -index 5837eb8a212f..3b8f0e14fa01 100644
> +index 5837eb8a212f..044892b6534d 100644
> --- a/drivers/clk/mvebu/clk-cpu.c
> +++ b/drivers/clk/mvebu/clk-cpu.c
> - .set_rate = clk_cpu_set_rate,
> - };
> -
> --static void __init of_cpu_clk_setup(struct device_node *node)
> -+/* Add parameter to allow this to support different clock operations. */
> -+static void __init _of_cpu_clk_setup(struct device_node *node,
> -+ const struct clk_ops *cpu_clk_ops)
> - {
> - struct cpu_clk *cpuclk;
> - void __iomem *clock_complex_base = of_iomap(node, 0);
> - cpuclk[cpu].hw.init = &init;
>
> - init.name = cpuclk[cpu].clk_name;
> -- init.ops = &cpu_ops;
> -+ init.ops = cpu_clk_ops;
> - init.flags = 0;
> - init.parent_names = &cpuclk[cpu].parent_name;
> - init.num_parents = 1;
> - iounmap(clock_complex_base);
> - }
> -
> -+/* Use this function to call the generic setup with the correct
> -+ * clock operation
> -+ */
> -+static void __init of_cpu_clk_setup(struct device_node *node)
> -+{
> -+ _of_cpu_clk_setup(node, &cpu_ops);
> -+}
> -+
> CLK_OF_DECLARE(armada_xp_cpu_clock, "marvell,armada-xp-cpu-clock",
> of_cpu_clk_setup);
> +
> -+/* Define the clock and operations for the mv98dx3236 - it cannot perform
> -+ * any operations.
> -+ */
> -+static const struct clk_ops mv98dx3236_cpu_ops = {
> -+ .recalc_rate = NULL,
> -+ .round_rate = NULL,
> -+ .set_rate = NULL,
> -+};
> -+
> +static void __init of_mv98dx3236_cpu_clk_setup(struct device_node *node)
> +{
> -+ _of_cpu_clk_setup(node, &mv98dx3236_cpu_ops);
> ++ of_clk_add_provider(node, of_clk_src_simple_get, NULL);
> +}
> +
> +CLK_OF_DECLARE(mv98dx3236_cpu_clock, "marvell,mv98dx3236-cpu-clock",
> @@ -285,7 +247,7 @@
> "qcom,gcc-msm8660"
> diff --git a/Documentation/devicetree/bindings/arm/marvell/98dx3236-resume-ctrl.txt b/Documentation/devicetree/bindings/arm/marvell/98dx3236-resume-ctrl.txt
> new file mode 100644
> -index 000000000000..8082ba872edd
> +index 000000000000..26eb9d3aa630
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/arm/marvell/98dx3236-resume-ctrl.txt
> +Resume Control
> @@ -304,10 +266,8 @@
> + compatible = "marvell,98dx3336-resume-ctrl";
> + reg = <0x20980 0x10>;
> +};
> -+
> -+
> diff --git a/arch/arm/mach-mvebu/platsmp.c b/arch/arm/mach-mvebu/platsmp.c
> -index 46c742d3bd41..59be3ca0464f 100644
> +index 46c742d3bd41..a5b464497e1a 100644
> --- a/arch/arm/mach-mvebu/platsmp.c
> +++ b/arch/arm/mach-mvebu/platsmp.c
>
> @@ -327,7 +287,7 @@
> +static const struct of_device_id of_mv98dx3236_resume_table[] = {
> + {
> + .compatible = "marvell,98dx3336-resume-ctrl",
> -+ .data = (void *)&mv98dx3336_resume_controller,
> ++ .data = &mv98dx3336_resume_controller,
> + },
> + { /* end of list */ },
> +};
> @@ -337,7 +297,7 @@
> + const struct of_device_id *match;
> + struct device_node *np;
> + void __iomem *base;
> -+ struct resume_controller *rc;
> ++ const struct resume_controller *rc;
> +
> + WARN_ON(hw_cpu != 1);
> +
> @@ -347,7 +307,7 @@
> + return -ENODEV;
> +
> + base = of_io_request_and_map(np, 0, of_node_full_name(np));
> -+ rc = (struct resume_controller *)match->data;
> ++ rc = match->data;
> + of_node_put(np);
> + if (IS_ERR(base))
> + return PTR_ERR(base);
> @@ -411,15 +371,17 @@
> diff --git a/Documentation/devicetree/bindings/pinctrl/marvell,armada-98dx3236-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/marvell,armada-98dx3236-pinctrl.txt
> new file mode 100644
> -index 000000000000..d4e6ecdfc853
> +index 000000000000..97aef67ee769
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pinctrl/marvell,armada-98dx3236-pinctrl.txt
> +* Marvell 98dx3236 pinctrl driver for mpp
> @@ -435,41 +397,41 @@
> +
> +name pins functions
> +================================================================================
> -+mpp0 0 gpio, spi0(mosi), dev(ad8)
> ++mpp0 0 gpo, spi0(mosi), dev(ad8)
> +mpp1 1 gpio, spi0(miso), dev(ad9)
> -+mpp2 2 gpio, spi0(sck), dev(ad10)
> ++mpp2 2 gpo, spi0(sck), dev(ad10)
> +mpp3 3 gpio, spi0(cs0), dev(ad11)
> +mpp4 4 gpio, spi0(cs1), smi(mdc), dev(cs0)
> +mpp5 5 gpio, pex(rsto), sd0(cmd), dev(bootcs)
> -+mpp6 6 gpio, sd0(clk), dev(a2)
> ++mpp6 6 gpo, sd0(clk), dev(a2)
> +mpp7 7 gpio, sd0(d0), dev(ale0)
> +mpp8 8 gpio, sd0(d1), dev(ale1)
> +mpp9 9 gpio, sd0(d2), dev(ready0)
> +mpp10 10 gpio, sd0(d3), dev(ad12)
> +mpp11 11 gpio, uart1(rxd), uart0(cts), dev(ad13)
> -+mpp12 12 gpio, uart1(txd), uart0(rts), dev(ad14)
> ++mpp12 12 gpo, uart1(txd), uart0(rts), dev(ad14)
> +mpp13 13 gpio, intr(out), dev(ad15)
> +mpp14 14 gpio, i2c0(sck)
> +mpp15 15 gpio, i2c0(sda)
> -+mpp16 16 gpio, dev(oe)
> -+mpp17 17 gpio, dev(clk)
> ++mpp16 16 gpo, dev(oe)
> ++mpp17 17 gpo, dev(clkout)
> +mpp18 18 gpio, uart1(txd)
> +mpp19 19 gpio, uart1(rxd), dev(rb)
> -+mpp20 20 gpio, dev(we)
> -+mpp21 21 gpio, dev(ad0)
> -+mpp22 22 gpio, dev(ad1)
> -+mpp23 23 gpio, dev(ad2)
> -+mpp24 24 gpio, dev(ad3)
> -+mpp25 25 gpio, dev(ad4)
> -+mpp26 26 gpio, dev(ad5)
> -+mpp27 27 gpio, dev(ad6)
> -+mpp28 28 gpio, dev(ad7)
> -+mpp29 29 gpio, dev(a0)
> -+mpp30 30 gpio, dev(a1)
> ++mpp20 20 gpo, dev(we0)
> ++mpp21 21 gpo, dev(ad0)
> ++mpp22 22 gpo, dev(ad1)
> ++mpp23 23 gpo, dev(ad2)
> ++mpp24 24 gpo, dev(ad3)
> ++mpp25 25 gpo, dev(ad4)
> ++mpp26 26 gpo, dev(ad5)
> ++mpp27 27 gpo, dev(ad6)
> ++mpp28 28 gpo, dev(ad7)
> ++mpp29 29 gpo, dev(a0)
> ++mpp30 30 gpo, dev(a1)
> +mpp31 31 gpio, slv_smi(mdc), smi(mdc), dev(we1)
> +mpp32 32 gpio, slv_smi(mdio), smi(mdio), dev(cs1)
> diff --git a/drivers/pinctrl/mvebu/pinctrl-armada-xp.c b/drivers/pinctrl/mvebu/pinctrl-armada-xp.c
> -index e4ea71a9d985..554eeae8cd21 100644
> +index 63e1bd506983..61cbc138703e 100644
> --- a/drivers/pinctrl/mvebu/pinctrl-armada-xp.c
> +++ b/drivers/pinctrl/mvebu/pinctrl-armada-xp.c
> V_MV78460 = BIT(2),
> @@ -495,8 +457,8 @@
> + MPP_VAR_FUNCTION(0x2, "spi0", "miso", V_98DX3236_PLUS),
> + MPP_VAR_FUNCTION(0x4, "dev", "ad9", V_98DX3236_PLUS)),
> + MPP_MODE(2,
> -+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_98DX3236_PLUS),
> -+ MPP_VAR_FUNCTION(0x2, "spi0", "csk", V_98DX3236_PLUS),
> ++ MPP_VAR_FUNCTION(0x0, "gpo", NULL, V_98DX3236_PLUS),
> ++ MPP_VAR_FUNCTION(0x2, "spi0", "sck", V_98DX3236_PLUS),
> + MPP_VAR_FUNCTION(0x4, "dev", "ad10", V_98DX3236_PLUS)),
> + MPP_MODE(3,
> + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_98DX3236_PLUS),
> @@ -511,7 +473,7 @@
> + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_98DX3236_PLUS),
> + MPP_VAR_FUNCTION(0x1, "pex", "rsto", V_98DX3236_PLUS),
> + MPP_VAR_FUNCTION(0x2, "sd0", "cmd", V_98DX4251),
> -+ MPP_VAR_FUNCTION(0x4, "dev", "bootcs0", V_98DX3236_PLUS)),
> ++ MPP_VAR_FUNCTION(0x4, "dev", "bootcs", V_98DX3236_PLUS)),
> + MPP_MODE(6,
> + MPP_VAR_FUNCTION(0x0, "gpo", NULL, V_98DX3236_PLUS),
> + MPP_VAR_FUNCTION(0x2, "sd0", "clk", V_98DX4251),
> @@ -563,7 +525,8 @@
> + MPP_VAR_FUNCTION(0x3, "uart1", "txd", V_98DX3236_PLUS)),
> + MPP_MODE(19,
> + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_98DX3236_PLUS),
> -+ MPP_VAR_FUNCTION(0x3, "uart1", "rxd", V_98DX3236_PLUS)),
> ++ MPP_VAR_FUNCTION(0x3, "uart1", "rxd", V_98DX3236_PLUS),
> ++ MPP_VAR_FUNCTION(0x4, "dev", "rb", V_98DX3236_PLUS)),
> + MPP_MODE(20,
> + MPP_VAR_FUNCTION(0x0, "gpo", NULL, V_98DX3236_PLUS),
> + MPP_VAR_FUNCTION(0x4, "dev", "we0", V_98DX3236_PLUS)),
> @@ -630,11 +593,11 @@
> };
>
> +static struct mvebu_mpp_ctrl mv98dx3236_mpp_controls[] = {
> -+ MPP_FUNC_CTRL(0, 32, NULL, armada_xp_mpp_ctrl),
> ++ MPP_FUNC_CTRL(0, 32, NULL, mvebu_mmio_mpp_ctrl),
> +};
> +
> +static struct pinctrl_gpio_range mv98dx3236_mpp_gpio_ranges[] = {
> -+ MPP_GPIO_RANGE(0, 0, 0, 32),
> ++ MPP_GPIO_RANGE(0, 0, 0, 32),
> +};
> +
> static int armada_xp_pinctrl_suspend(struct platform_device *pdev,
> @@ -767,7 +731,7 @@
> +};
> diff --git a/arch/arm/boot/dts/armada-xp-98dx3236.dtsi b/arch/arm/boot/dts/armada-xp-98dx3236.dtsi
> new file mode 100644
> -index 000000000000..4b7b2fe3b682
> +index 000000000000..9461128fae24
> --- /dev/null
> +++ b/arch/arm/boot/dts/armada-xp-98dx3236.dtsi
> +/*
> @@ -785,17 +749,17 @@
> + * published by the Free Software Foundation; either version 2 of the
> + * License, or (at your option) any later version.
> + *
> -+ * This file is distributed in the hope that it will be useful
> ++ * This file is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> -+ * Or, alternatively
> ++ * Or, alternatively,
> + *
> + * b) Permission is hereby granted, free of charge, to any person
> + * obtaining a copy of this software and associated documentation
> + * files (the "Software"), to deal in the Software without
> -+ * restriction, including without limitation the rights to use
> ++ * restriction, including without limitation the rights to use,
> + * copy, modify, merge, publish, distribute, sublicense, and/or
> + * sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following
> @@ -804,11 +768,11 @@
> + * The above copyright notice and this permission notice shall be
> + * included in all copies or substantial portions of the Software.
> + *
> -+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
> ++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> -+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
> ++ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + * OTHER DEALINGS IN THE SOFTWARE.
> @@ -851,9 +815,9 @@
> + MBUS_ID(0x08, 0x00) 0 0 0xac000000 0x100000>;
> +
> + /*
> -+ * 98DX3236 has 1 x1 PCIe unit Gen2.0: One unit can be
> ++ * 98DX3236 has 1 x1 PCIe unit Gen2.0
> + */
> -+ pcie-controller {
> ++ pciec: pcie-controller@82000000 {
> + compatible = "marvell,armada-xp-pcie";
> + status = "disabled";
> + device_type = "pci";
> @@ -870,7 +834,7 @@
> + 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */
> + 0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */>;
> +
> -+ pcie@1,0 {
> ++ pcie1: pcie@1,0 {
> + device_type = "pci";
> + assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
> + reg = <0x0800 0 0 0 0>;
> @@ -967,7 +931,7 @@
> + };
> + };
> +
> -+ dfx-registers {
> ++ dfxr: dfx-registers@ac000000 {
> + compatible = "simple-bus";
> + #address-cells = <1>;
> + #size-cells = <1>;
> @@ -987,7 +951,7 @@
> + };
> + };
> +
> -+ switch {
> ++ switch: switch@a8000000 {
> + compatible = "simple-bus";
> + #address-cells = <1>;
> + #size-cells = <1>;
> @@ -1026,7 +990,7 @@
> +};
> diff --git a/arch/arm/boot/dts/armada-xp-98dx3336.dtsi b/arch/arm/boot/dts/armada-xp-98dx3336.dtsi
> new file mode 100644
> -index 000000000000..a9b0f47f8df9
> +index 000000000000..e1580afdc260
> --- /dev/null
> +++ b/arch/arm/boot/dts/armada-xp-98dx3336.dtsi
> +/*
> @@ -1044,17 +1008,17 @@
> + * published by the Free Software Foundation; either version 2 of the
> + * License, or (at your option) any later version.
> + *
> -+ * This file is distributed in the hope that it will be useful
> ++ * This file is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> -+ * Or, alternatively
> ++ * Or, alternatively,
> + *
> + * b) Permission is hereby granted, free of charge, to any person
> + * obtaining a copy of this software and associated documentation
> + * files (the "Software"), to deal in the Software without
> -+ * restriction, including without limitation the rights to use
> ++ * restriction, including without limitation the rights to use,
> + * copy, modify, merge, publish, distribute, sublicense, and/or
> + * sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following
> @@ -1063,16 +1027,16 @@
> + * The above copyright notice and this permission notice shall be
> + * included in all copies or substantial portions of the Software.
> + *
> -+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
> ++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> -+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
> ++ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + * OTHER DEALINGS IN THE SOFTWARE.
> + *
> -+ * Contains definitions specific to the 98dx3336 SoC that are not
> ++ * Contains definitions specific to the 98dx3236 SoC that are not
> + * common to all Armada XP SoCs.
> + */
> +
> @@ -1107,7 +1071,7 @@
> +};
> diff --git a/arch/arm/boot/dts/armada-xp-98dx4251.dtsi b/arch/arm/boot/dts/armada-xp-98dx4251.dtsi
> new file mode 100644
> -index 000000000000..446e6e65ec59
> +index 000000000000..4b0533a4ccb7
> --- /dev/null
> +++ b/arch/arm/boot/dts/armada-xp-98dx4251.dtsi
> +/*
> @@ -1125,17 +1089,17 @@
> + * published by the Free Software Foundation; either version 2 of the
> + * License, or (at your option) any later version.
> + *
> -+ * This file is distributed in the hope that it will be useful
> ++ * This file is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> -+ * Or, alternatively
> ++ * Or, alternatively,
> + *
> + * b) Permission is hereby granted, free of charge, to any person
> + * obtaining a copy of this software and associated documentation
> + * files (the "Software"), to deal in the Software without
> -+ * restriction, including without limitation the rights to use
> ++ * restriction, including without limitation the rights to use,
> + * copy, modify, merge, publish, distribute, sublicense, and/or
> + * sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following
> @@ -1144,11 +1108,11 @@
> + * The above copyright notice and this permission notice shall be
> + * included in all copies or substantial portions of the Software.
> + *
> -+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
> ++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> -+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
> ++ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + * OTHER DEALINGS IN THE SOFTWARE.
> @@ -1213,15 +1177,15 @@
> diff --git a/arch/arm/boot/dts/db-dxbc2.dts b/arch/arm/boot/dts/db-dxbc2.dts
> new file mode 100644
> -index 000000000000..f56786cea5f8
> +index 000000000000..a8130805074e
> --- /dev/null
> +++ b/arch/arm/boot/dts/db-dxbc2.dts
> +/*
> @@ -1241,17 +1205,17 @@
> + * published by the Free Software Foundation; either version 2 of the
> + * License, or (at your option) any later version.
> + *
> -+ * This file is distributed in the hope that it will be useful
> ++ * This file is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> -+ * Or, alternatively
> ++ * Or, alternatively,
> + *
> + * b) Permission is hereby granted, free of charge, to any person
> + * obtaining a copy of this software and associated documentation
> + * files (the "Software"), to deal in the Software without
> -+ * restriction, including without limitation the rights to use
> ++ * restriction, including without limitation the rights to use,
> + * copy, modify, merge, publish, distribute, sublicense, and/or
> + * sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following
> @@ -1260,11 +1224,11 @@
> + * The above copyright notice and this permission notice shall be
> + * included in all copies or substantial portions of the Software.
> + *
> -+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
> ++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> -+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
> ++ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + * OTHER DEALINGS IN THE SOFTWARE.
> @@ -1295,66 +1259,58 @@
> + reg = <0 0x00000000 0 0x20000000>; /* 512 MB */
> + };
> +
> -+ soc {
> -+ ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
> -+ MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
> -+ MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000
> -+ MBUS_ID(0x03, 0x00) 0 0 0xa8000000 0x4000000
> -+ MBUS_ID(0x08, 0x00) 0 0 0xac000000 0x100000>;
> ++};
> +
> -+ devbus-bootcs {
> -+ status = "okay";
> ++&devbus_bootcs {
> ++ status = "okay";
> +
> -+ /* Device Bus parameters are required */
> ++ /* Device Bus parameters are required */
> +
> -+ /* Read parameters */
> -+ devbus,bus-width = <16>;
> -+ devbus,turn-off-ps = <60000>;
> -+ devbus,badr-skew-ps = <0>;
> -+ devbus,acc-first-ps = <124000>;
> -+ devbus,acc-next-ps = <248000>;
> -+ devbus,rd-setup-ps = <0>;
> -+ devbus,rd-hold-ps = <0>;
> -+
> -+ /* Write parameters */
> -+ devbus,sync-enable = <0>;
> -+ devbus,wr-high-ps = <60000>;
> -+ devbus,wr-low-ps = <60000>;
> -+ devbus,ale-wr-ps = <60000>;
> -+ };
> ++ /* Read parameters */
> ++ devbus,bus-width = <16>;
> ++ devbus,turn-off-ps = <60000>;
> ++ devbus,badr-skew-ps = <0>;
> ++ devbus,acc-first-ps = <124000>;
> ++ devbus,acc-next-ps = <248000>;
> ++ devbus,rd-setup-ps = <0>;
> ++ devbus,rd-hold-ps = <0>;
> ++
> ++ /* Write parameters */
> ++ devbus,sync-enable = <0>;
> ++ devbus,wr-high-ps = <60000>;
> ++ devbus,wr-low-ps = <60000>;
> ++ devbus,ale-wr-ps = <60000>;
> ++};
> +
> -+ internal-regs {
> -+ serial@12000 {
> -+ status = "okay";
> -+ };
> -+ serial@12100 {
> -+ status = "okay";
> -+ };
> ++&i2c0 {
> ++ clock-frequency = <100000>;
> ++ status = "okay";
> ++};
> +
> -+ i2c@11000 {
> -+ clock-frequency = <100000>;
> -+ status = "okay";
> -+ };
> ++&uart0 {
> ++ status = "okay";
> ++};
> +
> -+ mvsdio@d4000 {
> -+ pinctrl-0 = <&sdio_pins>;
> -+ pinctrl-names = "default";
> -+ status = "okay";
> -+ /* No CD or WP GPIOs */
> -+ broken-cd;
> -+ };
> ++&uart1 {
> ++ status = "okay";
> ++};
> +
> -+ nand@d0000 {
> -+ status = "okay";
> -+ num-cs = <1>;
> -+ marvell,nand-keep-config;
> -+ marvell,nand-enable-arbiter;
> -+ nand-on-flash-bbt;
> -+ nand-ecc-strength = <4>;
> -+ nand-ecc-step-size = <512>;
> -+ };
> -+ };
> -+ };
> ++&nand {
> ++ status = "okay";
> ++ num-cs = <1>;
> ++ marvell,nand-keep-config;
> ++ marvell,nand-enable-arbiter;
> ++ nand-on-flash-bbt;
> ++ nand-ecc-strength = <4>;
> ++ nand-ecc-step-size = <512>;
> ++};
> ++
> ++&sdio {
> ++ pinctrl-0 = <&sdio_pins>;
> ++ pinctrl-names = "default";
> ++ status = "okay";
> ++ /* No CD or WP GPIOs */
> ++ broken-cd;
> +};
> +
> +&spi0 {
> @@ -1385,7 +1341,7 @@
> +};
> diff --git a/arch/arm/boot/dts/db-xc3-24g4xg.dts b/arch/arm/boot/dts/db-xc3-24g4xg.dts
> new file mode 100644
> -index 000000000000..5eb89ffb9a7d
> +index 000000000000..4e07cb6ed800
> --- /dev/null
> +++ b/arch/arm/boot/dts/db-xc3-24g4xg.dts
> +/*
> @@ -1405,17 +1361,17 @@
> + * published by the Free Software Foundation; either version 2 of the
> + * License, or (at your option) any later version.
> + *
> -+ * This file is distributed in the hope that it will be useful
> ++ * This file is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> -+ * Or, alternatively
> ++ * Or, alternatively,
> + *
> + * b) Permission is hereby granted, free of charge, to any person
> + * obtaining a copy of this software and associated documentation
> + * files (the "Software"), to deal in the Software without
> -+ * restriction, including without limitation the rights to use
> ++ * restriction, including without limitation the rights to use,
> + * copy, modify, merge, publish, distribute, sublicense, and/or
> + * sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following
> @@ -1424,11 +1380,11 @@
> + * The above copyright notice and this permission notice shall be
> + * included in all copies or substantial portions of the Software.
> + *
> -+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
> ++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> -+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
> ++ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + * OTHER DEALINGS IN THE SOFTWARE.
> @@ -1458,63 +1414,50 @@
> + device_type = "memory";
> + reg = <0 0x00000000 0 0x40000000>; /* 1 GB */
> + };
> ++};
> +
> -+ soc {
> -+ ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
> -+ MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
> -+ MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000
> -+ MBUS_ID(0x03, 0x00) 0 0 0xa8000000 0x4000000
> -+ MBUS_ID(0x08, 0x00) 0 0 0xac000000 0x100000>;
> -+
> -+ devbus-bootcs {
> -+ status = "okay";
> ++&devbus_bootcs {
> ++ status = "okay";
> +
> -+ /* Device Bus parameters are required */
> ++ /* Device Bus parameters are required */
> +
> -+ /* Read parameters */
> -+ devbus,bus-width = <16>;
> -+ devbus,turn-off-ps = <60000>;
> -+ devbus,badr-skew-ps = <0>;
> -+ devbus,acc-first-ps = <124000>;
> -+ devbus,acc-next-ps = <248000>;
> -+ devbus,rd-setup-ps = <0>;
> -+ devbus,rd-hold-ps = <0>;
> -+
> -+ /* Write parameters */
> -+ devbus,sync-enable = <0>;
> -+ devbus,wr-high-ps = <60000>;
> -+ devbus,wr-low-ps = <60000>;
> -+ devbus,ale-wr-ps = <60000>;
> -+ };
> ++ /* Read parameters */
> ++ devbus,bus-width = <16>;
> ++ devbus,turn-off-ps = <60000>;
> ++ devbus,badr-skew-ps = <0>;
> ++ devbus,acc-first-ps = <124000>;
> ++ devbus,acc-next-ps = <248000>;
> ++ devbus,rd-setup-ps = <0>;
> ++ devbus,rd-hold-ps = <0>;
> ++
> ++ /* Write parameters */
> ++ devbus,sync-enable = <0>;
> ++ devbus,wr-high-ps = <60000>;
> ++ devbus,wr-low-ps = <60000>;
> ++ devbus,ale-wr-ps = <60000>;
> ++};
> +
> -+ internal-regs {
> -+ serial@12000 {
> -+ status = "okay";
> -+ };
> -+ serial@12100 {
> -+ status = "okay";
> -+ };
> ++&uart0 {
> ++ status = "okay";
> ++};
> +
> -+ i2c@11000 {
> -+ clock-frequency = <100000>;
> -+ status = "okay";
> -+ };
> ++&uart1 {
> ++ status = "okay";
> ++};
> +
> -+ mvsdio@d4000 {
> -+ status = "disabled";
> -+ };
> ++&i2c0 {
> ++ clock-frequency = <100000>;
> ++ status = "okay";
> ++};
> +
> -+ nand@d0000 {
> -+ status = "okay";
> -+ num-cs = <1>;
> -+ marvell,nand-keep-config;
> -+ marvell,nand-enable-arbiter;
> -+ nand-on-flash-bbt;
> -+ nand-ecc-strength = <4>;
> -+ nand-ecc-step-size = <512>;
> -+ };
> -+ };
> -+ };
> ++&nand {
> ++ status = "okay";
> ++ num-cs = <1>;
> ++ marvell,nand-keep-config;
> ++ marvell,nand-enable-arbiter;
> ++ nand-on-flash-bbt;
> ++ nand-ecc-strength = <4>;
> ++ nand-ecc-step-size = <512>;
> +};
> +
> +&spi0 {
>
> --
> 2.11.0.24.ge6920cf
>

--
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com

\
 
 \ /
  Last update: 2017-01-27 17:49    [W:0.248 / U:0.348 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site