lkml.org 
[lkml]   [2017]   [Jan]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3.12 135/235] net: stmmac: Fix race between stmmac_drv_probe and stmmac_open
Date
From: Florian Fainelli <f.fainelli@gmail.com>

3.12-stable review patch. If anyone has any objections, please let me know.

===============

[ Upstream commit 5701659004d68085182d2fd4199c79172165fa65 ]

There is currently a small window during which the network device registered by
stmmac can be made visible, yet all resources, including and clock and MDIO bus
have not had a chance to be set up, this can lead to the following error to
occur:

[ 473.919358] stmmaceth 0000:01:00.0 (unnamed net_device) (uninitialized):
stmmac_dvr_probe: warning: cannot get CSR clock
[ 473.919382] stmmaceth 0000:01:00.0: no reset control found
[ 473.919412] stmmac - user ID: 0x10, Synopsys ID: 0x42
[ 473.919429] stmmaceth 0000:01:00.0: DMA HW capability register supported
[ 473.919436] stmmaceth 0000:01:00.0: RX Checksum Offload Engine supported
[ 473.919443] stmmaceth 0000:01:00.0: TX Checksum insertion supported
[ 473.919451] stmmaceth 0000:01:00.0 (unnamed net_device) (uninitialized):
Enable RX Mitigation via HW Watchdog Timer
[ 473.921395] libphy: PHY stmmac-1:00 not found
[ 473.921417] stmmaceth 0000:01:00.0 eth0: Could not attach to PHY
[ 473.921427] stmmaceth 0000:01:00.0 eth0: stmmac_open: Cannot attach to
PHY (error: -19)
[ 473.959710] libphy: stmmac: probed
[ 473.959724] stmmaceth 0000:01:00.0 eth0: PHY ID 01410cc2 at 0 IRQ POLL
(stmmac-1:00) active
[ 473.959728] stmmaceth 0000:01:00.0 eth0: PHY ID 01410cc2 at 1 IRQ POLL
(stmmac-1:01)
[ 473.959731] stmmaceth 0000:01:00.0 eth0: PHY ID 01410cc2 at 2 IRQ POLL
(stmmac-1:02)
[ 473.959734] stmmaceth 0000:01:00.0 eth0: PHY ID 01410cc2 at 3 IRQ POLL
(stmmac-1:03)

Fix this by making sure that register_netdev() is the last thing being done,
which guarantees that the clock and the MDIO bus are available.

Fixes: 4bfcbd7abce2 ("stmmac: Move the mdio_register/_unregister in probe/remove")
Reported-by: Kweh, Hock Leong <hock.leong.kweh@intel.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 20 ++++++++++++--------
1 file changed, 12 insertions(+), 8 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 3b5459696310..4ce28987c3c1 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -2723,12 +2723,6 @@ struct stmmac_priv *stmmac_dvr_probe(struct device *device,
spin_lock_init(&priv->lock);
spin_lock_init(&priv->tx_lock);

- ret = register_netdev(ndev);
- if (ret) {
- pr_err("%s: ERROR %i registering the device\n", __func__, ret);
- goto error_netdev_register;
- }
-
priv->stmmac_clk = clk_get(priv->device, STMMAC_RESOURCE_NAME);
if (IS_ERR(priv->stmmac_clk)) {
pr_warn("%s: warning: cannot get CSR clock\n", __func__);
@@ -2759,13 +2753,23 @@ struct stmmac_priv *stmmac_dvr_probe(struct device *device,
}
}

+ ret = register_netdev(ndev);
+ if (ret) {
+ netdev_err(priv->dev, "%s: ERROR %i registering the device\n",
+ __func__, ret);
+ goto error_netdev_register;
+ }
+
return priv;

+error_netdev_register:
+ if (priv->pcs != STMMAC_PCS_RGMII &&
+ priv->pcs != STMMAC_PCS_TBI &&
+ priv->pcs != STMMAC_PCS_RTBI)
+ stmmac_mdio_unregister(ndev);
error_mdio_register:
clk_put(priv->stmmac_clk);
error_clk_get:
- unregister_netdev(ndev);
-error_netdev_register:
netif_napi_del(&priv->napi);
error_free_netdev:
free_netdev(ndev);
--
2.11.0
\
 
 \ /
  Last update: 2017-01-27 12:11    [W:0.643 / U:0.024 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site