Messages in this thread | | | Date | Fri, 27 Jan 2017 11:03:04 +0000 | From | Lee Jones <> | Subject | Re: [STLinux Kernel] [PATCH 7/8] ARM: dts: STiH407-family: Use new Pinctrl groups |
| |
On Wed, 25 Jan 2017, Peter Griffin wrote:
> Hi Lee, > > On Tue, 24 Jan 2017, Lee Jones wrote: > > > Having just defined some new Pinctrl groups for when when HW flow- > > control is {en,dis}abled, let's reference them for use within the > > driver. > > > > Signed-off-by: Lee Jones <lee.jones@linaro.org> > > Same as previous comment, your enabling hw flow control for all > stih407 family boards. I've not checked the schematics for them > but as hw flow control is dependent on board wiring, IMO this > should be added in board specific file.
Fair shout.
On the B2120 UART0 is hooked up to the Smart Card Reader.
Will fix.
> > --- > > arch/arm/boot/dts/stih407-family.dtsi | 5 +++-- > > 1 file changed, 3 insertions(+), 2 deletions(-) > > > > diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi > > index c8b2944..9789978 100644 > > --- a/arch/arm/boot/dts/stih407-family.dtsi > > +++ b/arch/arm/boot/dts/stih407-family.dtsi > > @@ -222,8 +222,9 @@ > > compatible = "st,asc"; > > reg = <0x9830000 0x2c>; > > interrupts = <GIC_SPI 122 IRQ_TYPE_NONE>; > > - pinctrl-names = "default"; > > - pinctrl-0 = <&pinctrl_serial0>; > > + pinctrl-names = "default", "manual-rts"; > > + pinctrl-0 = <&pinctrl_serial0_flowctrl>; > > + pinctrl-1 = <&pinctrl_serial0>; > > clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>; > > > > status = "disabled";
-- Lee Jones Linaro STMicroelectronics Landing Team Lead Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog
| |