Messages in this thread | | | Date | Tue, 24 Jan 2017 21:28:47 +0100 | From | Andrew Lunn <> | Subject | Re: [PATCH net-next v6 4/4] phy: marvell: Add support for the PHY embedded in the topaz switch |
| |
On Tue, Jan 24, 2017 at 09:10:26PM +0100, Gregory CLEMENT wrote: > The PHY with the ID 0x1410C00
:-(
I don't have a better reference, but Linux/Documentation/devicetree/bindings/net/phy.txt says:
22 If the phy's identifier is known then the list may contain an entry 23 of the form: "ethernet-phy-idAAAA.BBBB" where 24 AAAA - The value of the 16 bit Phy Identifier 1 register as 25 4 hex digits. This is the chip vendor OUI bits 3:18 26 BBBB - The value of the 16 bit Phy Identifier 2 register as 27 4 hex digits. This is the chip vendor OUI bits 19:24, 28 followed by 10 bits of a vendor specific ID.
So the lower 10 bits of 0x1410C00 are 0. So we know it is a Marvell PHY from the OUI, but the vendor specific bits are all 0.
Please take a look at:
https://marc.info/?l=linux-netdev&m=148495522620757&w=1
and
https://marc.info/?l=linux-netdev&m=148495510320714&w=1
Maybe i should submit these two independently, so you can extend it for the 88E6341 family.
Andrew
| |