lkml.org 
[lkml]   [2017]   [Jan]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4.4 29/42] ARM: dts: da850-evm: fix read access to SPI flash
Date
4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Fabien Parent <fparent@baylibre.com>

commit 43849785e1079f6606a31cb7fda92d1200849728 upstream.

Read access to the SPI flash are broken on da850-evm, i.e. the data
read is not what is actually programmed on the flash.
According to the datasheet for the M25P64 part present on the da850-evm,
if the SPI frequency is higher than 20MHz then the READ command is not
usable anymore and only the FAST_READ command can be used to read data.

This commit specifies in the DTS that we should use FAST_READ command
instead of the READ command.

Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Fabien Parent <fparent@baylibre.com>
[nsekhar@ti.com: subject line adjustment]
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: Olof Johansson <olof@lixom.net>

---
arch/arm/boot/dts/da850-evm.dts | 1 +
1 file changed, 1 insertion(+)

--- a/arch/arm/boot/dts/da850-evm.dts
+++ b/arch/arm/boot/dts/da850-evm.dts
@@ -85,6 +85,7 @@
#size-cells = <1>;
compatible = "m25p64";
spi-max-frequency = <30000000>;
+ m25p,fast-read;
reg = <0>;
partition@0 {
label = "U-Boot-SPL";

\
 
 \ /
  Last update: 2017-01-24 08:58    [W:0.225 / U:0.052 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site