lkml.org 
[lkml]   [2017]   [Jan]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH] Revert "mmc: dw_mmc-rockchip: add runtime PM support"
Hi,

On Fri, 20 Jan 2017 15:08:57 +0900, Jaehoon Chung wrote:
> On 01/17/2017 10:38 PM, Romain Perier wrote:
> > In my case I can reproduce the issue on the rock2 and the firefly-rk3288. A workaround is to
> >
> > comment the line ".pm = <&pm_ops_foo>" .
>
> Sorry for late. I'm checking runtime PM for this.
> After that, i will decide whether revert or not.

I hit this problem on Rock2 when trying 4.10-rc4. The following patch
fixes it for me.

I'm not sure if this is safe in general or whether it should be guarded
by a quirk that is enabled for RK3288.

-- >8 --
Subject: [PATCH] mmc: dw_mmc: restore CIU state on resume

At least on RK3288, asserting SDMMC_CTRL_RESET causes the CIU to reset
and disable the clock. We need to send SDMMC_CMD_UPD_CLK after doing
this in order to avoid the MMC host hanging.

Signed-off-by: John Keeping <john@metanate.com>
---
drivers/mmc/host/dw_mmc.c | 4 ++++
1 file changed, 4 insertions(+)

diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
index b44306b886cb..e7504dabcfb6 100644
--- a/drivers/mmc/host/dw_mmc.c
+++ b/drivers/mmc/host/dw_mmc.c
@@ -3311,6 +3311,7 @@ int dw_mci_runtime_resume(struct device *dev)
{
int i, ret = 0;
struct dw_mci *host = dev_get_drvdata(dev);
+ u32 sdmmc_cmd_bits = SDMMC_CMD_UPD_CLK | SDMMC_CMD_PRV_DAT_WAIT;

if (host->cur_slot &&
(mmc_can_gpio_cd(host->cur_slot->mmc) ||
@@ -3357,6 +3358,9 @@ int dw_mci_runtime_resume(struct device *dev)
if (slot->mmc->pm_flags & MMC_PM_KEEP_POWER) {
dw_mci_set_ios(slot->mmc, &slot->mmc->ios);
dw_mci_setup_bus(slot, true);
+ } else {
+ /* restore CIU */
+ mci_send_cmd(slot, sdmmc_cmd_bits, 0);
}
}

--
2.11.0.197.gb556de5.dirty
\
 
 \ /
  Last update: 2017-01-23 12:25    [W:0.072 / U:0.368 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site