lkml.org 
[lkml]   [2017]   [Jan]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [lkp-robot] [rcu] b332151a29: kernel_BUG_at_mm/slab.c
On 2017-01-19 09:02:16 [+0800], kernel test robot wrote:
> test-description: Trinity is a linux system call fuzz tester.

you don't even get to fire up trinity. With and without the patch you
crash very early.

> +-----------------------------------------------------+------------+------------+
> | | d5f6ab9c11 | b332151a29 |
> +-----------------------------------------------------+------------+------------+
> | boot_successes | 0 | 0 |
> | boot_failures | 6 | 8 |
> | WARNING:at_include/linux/kref.h:#kobject_get | 6 | 8 |
> | WARNING:at_arch/x86/mm/dump_pagetables.c:#note_page | 2 | 2 |
> | kernel_BUG_at_mm/slab.c | 0 | 4 |
> | invalid_opcode:#[##]PREEMPT_SMP | 0 | 4 |
> | Kernel_panic-not_syncing:Fatal_exception | 0 | 6 |
> | BUG:unable_to_handle_kernel | 0 | 2 |
> | Oops | 0 | 2 |
> +-----------------------------------------------------+------------+------------+

There is no successful boot. The pattern changes with patch in question
applied.

> [ 8.044624] sd 0:0:0:0: [sda] Synchronizing SCSI cache
> [ 8.055721] slab: double free detected in cache 'kmalloc-32', objp 8af558c0
> [ 8.057138] ------------[ cut here ]------------
> [ 8.058085] kernel BUG at mm/slab.c:2624!
> [ 8.059255] invalid opcode: 0000 [#1] PREEMPT SMP

yes. With and without the patch there is a lot of wrong stuff like
complains about a kobject initialized again. This leads to a double free
at some point.

What happens is the following: CONFIG_SCSI_DEBUG is enabled which adds a
dummy host controller with a dummy disk. This gets probed during boot.
Since you also enabled CONFIG_DEBUG_TEST_DRIVER_REMOVE it gets removed
and re-added. The request_queue in genhd disk is re-used while the disk
is added for the second time:

[ 1.314404] scsi host0: scsi_debug: version 1.86 [20160430]
[ 1.314404] dev_size_mb=8, opts=0x0, submit_queues=1, statistics=0
[ 1.315994] scsi 0:0:0:0: Direct-Access Linux scsi_debug 0186 PQ: 0 ANSI: 7
[ 1.351052] sd 0:0:0:0: [sda] 16384 512-byte logical blocks: (8.39 MB/8.00 MiB)
[ 1.355916] sd 0:0:0:0: [sda] Write Protect is off
[ 1.356838] sd 0:0:0:0: [sda] Mode Sense: 73 00 10 08
[ 1.364455] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ 1.437642] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.438413] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 1.445868] sd 0:0:0:0: [sda] 16384 512-byte logical blocks: (8.39 MB/8.00 MiB)
[ 1.450819] sd 0:0:0:0: [sda] Write Protect is off
[ 1.451853] sd 0:0:0:0: [sda] Mode Sense: 73 00 10 08
[ 1.459636] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ 1.471446] kobject (beb87d44): tried to init an initialized object, something is seriously wrong.

Since you also need CONFIG_SCSI_MQ_DEFAULT enabled I assume the MQ block
code is buggy here.
But commit b332151a29 in Paul's tree innocent.

Sebastian

\
 
 \ /
  Last update: 2017-01-20 17:02    [W:0.051 / U:1.988 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site