lkml.org 
[lkml]   [2017]   [Jan]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 3/5] arm64: dts: sun50i: add MMC nodes
Hi,

On Tue, Jan 3, 2017 at 7:03 AM, Andre Przywara <andre.przywara@arm.com> wrote:

A commit message explaining the mmc controllers would be nice.

> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
> ---
> arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 67 +++++++++++++++++++++++++++
> 1 file changed, 67 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
> index e0dcab8..c680566 100644
> --- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
> @@ -150,6 +150,32 @@
> pins = "PB8", "PB9";
> function = "uart0";
> };
> +
> + mmc0_pins: mmc0@0 {
> + pins = "PF0", "PF1", "PF2", "PF3", "PF4", "PF5";
> + function = "mmc0";
> + drive-strength = <30>;
> + };
> +
> + mmc0_default_cd_pin: mmc0_cd_pin@0 {
> + pins = "PF6";
> + function = "gpio_in";
> + bias-pull-up;
> + };

We are starting to drop pinmux nodes for gpio usage.

> +
> + mmc1_pins: mmc1@0 {
> + pins = "PG0", "PG1", "PG2", "PG3", "PG4", "PG5";
> + function = "mmc1";
> + drive-strength = <30>;
> + };
> +
> + mmc2_pins: mmc2@0 {
> + pins = "PC1", "PC5", "PC6", "PC8", "PC9",
> + "PC10", "PC11", "PC12", "PC13", "PC14",
> + "PC15", "PC16";
> + function = "mmc2";
> + drive-strength = <30>;
> + };

Moreover I think you should split out the pinmux nodes to a separate patch.

> };
>
> uart0: serial@1c28000 {
> @@ -240,6 +266,47 @@
> #size-cells = <0>;
> };
>
> + mmc0: mmc@1c0f000 {
> + compatible = "allwinner,sun50i-a64-mmc",
> + "allwinner,sun5i-a13-mmc";

Given that sun5i doesn't support mmc delay timings, and the A64 has
calibration and delay timings, I wouldn't call them compatible.

Or are you claiming that for the A64 has a delay of 0 for the
currently supported speeds, so the calibration doesn't really
matter? If so this should be mentioned in the commit message.

> + reg = <0x01c0f000 0x1000>;
> + clocks = <&ccu 31>, <&ccu 75>;

The clock / reset index macros are in the tree now.
Please switch to them.

ChenYu

> + clock-names = "ahb", "mmc";
> + resets = <&ccu 8>;
> + reset-names = "ahb";
> + interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
> + status = "disabled";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> +
> + mmc1: mmc@1c10000 {
> + compatible = "allwinner,sun50i-a64-mmc",
> + "allwinner,sun5i-a13-mmc";
> + reg = <0x01c10000 0x1000>;
> + clocks = <&ccu 32>, <&ccu 76>;
> + clock-names = "ahb", "mmc";
> + resets = <&ccu 9>;
> + reset-names = "ahb";
> + interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
> + status = "disabled";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> +
> + mmc2: mmc@1c11000 {
> + compatible = "allwinner,sun50i-a64-emmc";
> + reg = <0x01c11000 0x1000>;
> + clocks = <&ccu 33>, <&ccu 77>;
> + clock-names = "ahb", "mmc";
> + resets = <&ccu 10>;
> + reset-names = "ahb";
> + interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
> + status = "disabled";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> +
> gic: interrupt-controller@1c81000 {
> compatible = "arm,gic-400";
> reg = <0x01c81000 0x1000>,
> --
> 2.8.2
>

\
 
 \ /
  Last update: 2017-01-03 04:09    [W:0.160 / U:0.148 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site