lkml.org 
[lkml]   [2017]   [Jan]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
SubjectRE: [RFC PATCH] usb: host: xhci: plat: add support for otg_set_host() call
Date
Ping !!

-----Original Message-----
From: Manish Narani [mailto:manish.narani@xilinx.com]
Sent: Thursday, December 15, 2016 1:24 PM
To: mathias.nyman@intel.com; gregkh@linuxfoundation.org; linux-usb@vger.kernel.org; linux-kernel@vger.kernel.org
Cc: Anurag Kumar Vulisha <anuragku@xilinx.com>; Punnaiah Choudary Kalluri <punnaia@xilinx.com>; Anirudha Sarangi <anirudh@xilinx.com>; Manish Narani <MNARANI@xilinx.com>
Subject: [RFC PATCH] usb: host: xhci: plat: add support for otg_set_host() call

This patch will add support for OTG host initialization. This will help OTG drivers to populate their host subsystem.

Signed-off-by: Manish Narani <mnarani@xilinx.com>
---
drivers/usb/host/xhci-plat.c | 39 +++++++++++++++++++++++++++++++++++++++
1 file changed, 39 insertions(+)

diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c index ddfab30..aa08bdd 100644
--- a/drivers/usb/host/xhci-plat.c
+++ b/drivers/usb/host/xhci-plat.c
@@ -19,6 +19,7 @@
#include <linux/usb/phy.h>
#include <linux/slab.h>
#include <linux/acpi.h>
+#include <linux/usb/otg.h>

#include "xhci.h"
#include "xhci-plat.h"
@@ -144,6 +145,37 @@ static const struct of_device_id usb_xhci_of_match[] = { MODULE_DEVICE_TABLE(of, usb_xhci_of_match); #endif

+static int usb_otg_set_host(struct device *dev, struct usb_hcd *hcd,
+bool yes) {
+ int ret = 0;
+
+ hcd->usb_phy = usb_get_phy(USB_PHY_TYPE_USB3);
+ if (!IS_ERR_OR_NULL(hcd->usb_phy) && hcd->usb_phy->otg) {
+ dev_dbg(dev, "%s otg support available\n", __func__);
+ if (yes) {
+ if (otg_set_host(hcd->usb_phy->otg, &hcd->self)) {
+ dev_err(dev, "%s otg_set_host failed\n",
+ __func__);
+ usb_put_phy(hcd->usb_phy);
+ goto disable_phy;
+ }
+ } else {
+ ret = otg_set_host(hcd->usb_phy->otg, NULL);
+ usb_put_phy(hcd->usb_phy);
+ goto disable_phy;
+ }
+
+ } else
+ goto disable_phy;
+
+ return 0;
+
+disable_phy:
+ hcd->usb_phy = NULL;
+
+ return ret;
+}
+
static int xhci_plat_probe(struct platform_device *pdev) {
const struct of_device_id *match;
@@ -255,6 +287,11 @@ static int xhci_plat_probe(struct platform_device *pdev)
if (ret)
goto dealloc_usb2_hcd;

+ ret = usb_otg_set_host(&pdev->dev, hcd, 1);
+ if (ret)
+ goto dealloc_usb2_hcd;
+
+
return 0;


@@ -283,6 +320,8 @@ static int xhci_plat_remove(struct platform_device *dev)
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
struct clk *clk = xhci->clk;

+ usb_otg_set_host(&dev->dev, hcd, 0);
+
usb_remove_hcd(xhci->shared_hcd);
usb_phy_shutdown(hcd->usb_phy);

--
2.1.1


This email and any attachments are intended for the sole use of the named recipient(s) and contain(s) confidential information that may be proprietary, privileged or copyrighted under applicable law. If you are not the intended recipient, do not read, copy, or forward this email message or any attachments. Delete this email message and any attachments immediately.

\
 
 \ /
  Last update: 2017-01-02 07:30    [W:0.071 / U:0.192 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site