lkml.org 
[lkml]   [2017]   [Jan]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 2/4] ARM: nommu: dynamic exception base address setting
From
Date
Hi,

On 18/01/17 20:38, afzal mohammed wrote:
> No-MMU dynamic exception base address configuration on CP15
> processors. In the case of low vectors, decision based on whether
> security extensions are enabled & whether remap vectors to RAM
> CONFIG option is selected.
>
> For no-MMU without CP15, current default value of 0x0 is retained.
>
> Signed-off-by: afzal mohammed <afzal.mohd.ma@gmail.com>
> ---
> arch/arm/mm/nommu.c | 64 +++++++++++++++++++++++++++++++++++++++++++++++++++--
> 1 file changed, 62 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/mm/nommu.c b/arch/arm/mm/nommu.c
> index 2740967727e2..db8e784f20f3 100644
> --- a/arch/arm/mm/nommu.c
> +++ b/arch/arm/mm/nommu.c
> @@ -11,6 +11,7 @@
> #include <linux/kernel.h>
>
> #include <asm/cacheflush.h>
> +#include <asm/cp15.h>
> #include <asm/sections.h>
> #include <asm/page.h>
> #include <asm/setup.h>
> @@ -22,6 +23,8 @@
>
> #include "mm.h"
>
> +unsigned long vectors_base;
> +
> #ifdef CONFIG_ARM_MPU
> struct mpu_rgn_info mpu_rgn_info;
>
> @@ -278,15 +281,72 @@ static void sanity_check_meminfo_mpu(void) {}
> static void __init mpu_setup(void) {}
> #endif /* CONFIG_ARM_MPU */
>
> +#ifdef CONFIG_CPU_CP15
> +#ifdef CONFIG_CPU_HIGH_VECTOR
> +static unsigned long __init setup_vectors_base(void)
> +{
> + unsigned long reg = get_cr();
> +
> + set_cr(reg | CR_V);
> + return 0xffff0000;
> +}
> +#else /* CONFIG_CPU_HIGH_VECTOR */
> +/*
> + * ID_PRF1 bits (CP#15 ID_PFR1)
> + */
> +#define ID_PFR1_SE (0x3 << 4) /* Security extension enable bits */

This bitfiled is 4 bits wide.

> +
> +/* Read processor feature register ID_PFR1 */
> +static unsigned long get_id_pfr1(void)
> +{
> + unsigned long val;
> +
> + asm("mrc p15, 0, %0, c0, c1, 1" : "=r" (val) : : "cc");
> + return val;
> +}
> +
> +/* Write exception base address to VBAR */
> +static void set_vbar(unsigned long val)
> +{
> + asm("mcr p15, 0, %0, c12, c0, 0" : : "r" (val) : "cc");
> +}
> +
> +static bool __init security_extensions_enabled(void)
> +{
> + return !!(get_id_pfr1() & ID_PFR1_SE);
> +}
> +
> +static unsigned long __init setup_vectors_base(void)
> +{
> + unsigned long base = 0, reg = get_cr();
> +
> + set_cr(reg & ~CR_V);
> + if (security_extensions_enabled()) {

You can use

cpuid_feature_extract(CPUID_EXT_PFR1, 4)

and add a comment explaining what we are looking for and why.

> + if (IS_ENABLED(CONFIG_REMAP_VECTORS_TO_RAM))
> + base = CONFIG_DRAM_BASE;
> + set_vbar(base);
> + } else if (IS_ENABLED(CONFIG_REMAP_VECTORS_TO_RAM)) {
> + if (CONFIG_DRAM_BASE != 0)
> + pr_err("Security extensions not enabled, vectors cannot be remapped to RAM, vectors base will be 0x00000000\n");
> + }
> +
> + return base;
> +}
> +#endif /* CONFIG_CPU_HIGH_VECTOR */
> +#endif /* CONFIG_CPU_CP15 */
> +
> void __init arm_mm_memblock_reserve(void)
> {
> #ifndef CONFIG_CPU_V7M
> +#ifdef CONFIG_CPU_CP15
> + vectors_base = setup_vectors_base();
> +#endif

alternatively it can be

unsigned long vector_base = IS_ENABLED(CONFIG_CPU_CP15) ? setup_vbar() : 0;


Thanks
Vladimir

> /*
> * Register the exception vector page.
> * some architectures which the DRAM is the exception vector to trap,
> * alloc_page breaks with error, although it is not NULL, but "0."
> */
> - memblock_reserve(CONFIG_VECTORS_BASE, 2 * PAGE_SIZE);
> + memblock_reserve(vectors_base, 2 * PAGE_SIZE);
> #else /* ifndef CONFIG_CPU_V7M */
> /*
> * There is no dedicated vector page on V7-M. So nothing needs to be
> @@ -310,7 +370,7 @@ void __init sanity_check_meminfo(void)
> */
> void __init paging_init(const struct machine_desc *mdesc)
> {
> - early_trap_init((void *)CONFIG_VECTORS_BASE);
> + early_trap_init((void *)vectors_base);
> mpu_setup();
> bootmem_init();
> }
>

\
 
 \ /
  Last update: 2017-01-19 15:00    [W:0.136 / U:0.428 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site