lkml.org 
[lkml]   [2017]   [Jan]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [RESEND RFC 3/3] mmc: sdhci: Add more debug info in case of data error
From
Date
On 10/01/17 08:41, Ritesh Harjani wrote:
> print error log message and dump sdhc registers for debugging
> purpose in case of data errors (except when tuning commands
> generate CRC/timeout/end bit errors).

It is a bit ugly and probably only useful during driver development, so I am
not at all enthusiastic about this.

>
> Signed-off-by: Ritesh Harjani <riteshh@codeaurora.org>
> Signed-off-by: Asutosh Das <asutoshd@codeaurora.org>
> ---
> drivers/mmc/host/sdhci.c | 21 +++++++++++++++++++--
> 1 file changed, 19 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
> index 73a8918..2e51e49 100644
> --- a/drivers/mmc/host/sdhci.c
> +++ b/drivers/mmc/host/sdhci.c
> @@ -2616,9 +2616,26 @@ static void sdhci_data_irq(struct sdhci_host *host, u32 intmask)
> host->ops->adma_workaround(host, intmask);
> }
>
> - if (host->data->error)
> + if (host->data->error) {
> + bool pr_msg = true;
> +
> + if (intmask & (SDHCI_INT_DATA_CRC | SDHCI_INT_DATA_TIMEOUT |
> + SDHCI_INT_DATA_END_BIT)) {
> + command = SDHCI_GET_CMD(sdhci_readw(host,
> + SDHCI_COMMAND));
> + if (command == MMC_SEND_TUNING_BLOCK_HS200 ||
> + command == MMC_SEND_TUNING_BLOCK)
> + pr_msg = false;
> + }
> + if (pr_msg) {
> + pr_err("%s: data txfr (0x%08x) error: %d\n",
> + mmc_hostname(host->mmc), intmask,
> + host->data->error);
> + sdhci_dumpregs(host);
> + }
> +
> sdhci_finish_data(host);
> - else {
> + } else {
> if (intmask & (SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL))
> sdhci_transfer_pio(host);
>
>

\
 
 \ /
  Last update: 2017-01-19 13:00    [W:0.114 / U:0.144 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site