lkml.org 
[lkml]   [2017]   [Jan]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH] ARM: davinci: da850-evm: fix read access to SPI flash
Date
Fabien Parent <fparent@baylibre.com> writes:

> Read access to the SPI flash are broken on da850-evm, i.e. the data
> read is not what is actually programmed on the flash.
> According to the datasheet for the M25P64 part present on the da850-evm,
> if the SPI frequency is higher than 20MHz then the READ command is not
> usable anymore and only the FAST_READ command can be used to read data.
>
> This commit specifies in the DTS that we should use FAST_READ command
> instead of the READ command.
>
> Signed-off-by: Fabien Parent <fparent@baylibre.com>

Tested on da850-evm on top of v4.10-rc3. This gets the DT boot
functionatliy in line with the legacy (board-file) boot.

Tested-by: Kevin Hilman <khilman@baylibre.com>

Kevin

\
 
 \ /
  Last update: 2017-01-18 01:25    [W:0.042 / U:0.196 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site