lkml.org 
[lkml]   [2017]   [Jan]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RFC v2 4/5] DT bindings documentation for Synopsys UDC platform driver
Date
This patch adds device tree bindings documentation for Synopsys
USB device controller platform driver.

Signed-off-by: Raviteja Garimella <raviteja.garimella@broadcom.com>
---
.../devicetree/bindings/usb/snps,dw-ahb-udc.txt | 27 ++++++++++++++++++++++
1 file changed, 27 insertions(+)
create mode 100644 Documentation/devicetree/bindings/usb/snps,dw-ahb-udc.txt

diff --git a/Documentation/devicetree/bindings/usb/snps,dw-ahb-udc.txt b/Documentation/devicetree/bindings/usb/snps,dw-ahb-udc.txt
new file mode 100644
index 0000000..0c18327
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/snps,dw-ahb-udc.txt
@@ -0,0 +1,27 @@
+Synopsys USB Device controller.
+
+The device node is used for Synopsys Designware Cores AHB
+Subsystem Device Controller (UDC).
+
+This device node is used by UDCs integrated it Broadcom's
+Northstar2 and Cygnus SoC's.
+
+Required properties:
+ - compatible: should be "snps,dw-ahb-udc"
+ - reg: Offset and length of UDC register set
+ - interrupts: description of interrupt line
+ - phys: phandle to phy node.
+ - extcon: phandle to the extcon device. This is optional and
+ not required for those that don't require extcon support.
+ Extcon support will be required if the UDC is connected to
+ a Dual Role Device Phy that supports both Host and Device
+ mode based on the external cable.
+
+Example:
+ udc_dwc: usb@664e0000 {
+ compatible = "snps,dw-ahb-udc";
+ reg = <0x664e0000 0x2000>;
+ interrupts = <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&usbdrd_phy>;
+ extcon = <&usbdrd_phy>";
+ };
--
2.1.0
\
 
 \ /
  Last update: 2017-01-17 09:16    [W:0.113 / U:0.208 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site