lkml.org 
[lkml]   [2017]   [Jan]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH V2 2/5] phy: phy-exynos-pcie: Add support for Exynos PCIe phy
From
Date
Hi,

On Wednesday 04 January 2017 06:04 PM, Jaehoon Chung wrote:
> This patch supports to use Generic Phy framework for Exynos PCIe phy.
> When Exynos that supported the pcie want to use the PCIe,
> it needs to control the phy resgister.
> But it should be more complex to control in their own PCIe device drivers.
>
> Currently, there is an exynos5440 case to support the pcie.
> So this driver is based on Exynos5440 PCIe.
> In future, will support the Other exynos SoCs likes exynos5433, exynos7.

please re-write the commit message.
>
> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
> ---
> Changelog on V2:
> - Not include the codes relevant to pci-exynos.
> - Remove the getting child node.
>
> drivers/phy/Kconfig | 9 ++
> drivers/phy/Makefile | 1 +
> drivers/phy/phy-exynos-pcie.c | 280 ++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 290 insertions(+)
> create mode 100644 drivers/phy/phy-exynos-pcie.c
>
> diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
> index e8eb7f2..2dddef4 100644
> --- a/drivers/phy/Kconfig
> +++ b/drivers/phy/Kconfig
> @@ -331,6 +331,15 @@ config PHY_EXYNOS5_USBDRD
> This driver provides PHY interface for USB 3.0 DRD controller
> present on Exynos5 SoC series.
>
> +config PHY_EXYNOS_PCIE
> + bool "Exynos PCIe PHY driver"
> + depends on ARCH_EXYNOS && OF

include COMPILE_TEST
> + depends on PCI_EXYNOS

PCI_EXYNOS should depend on PHY_EXYNOS_PCIE if at all required. Or else do away
with this dependency.
> + select GENERIC_PHY
> + help
> + Enable PCIe PHY support for Exynos SoC series.
> + This driver provides PHY interface for Exynos PCIe controller.
> +
> config PHY_PISTACHIO_USB
> tristate "IMG Pistachio USB2.0 PHY driver"
> depends on MACH_PISTACHIO
> diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
> index 65eb2f4..081aeb4 100644
> --- a/drivers/phy/Makefile
> +++ b/drivers/phy/Makefile
> @@ -37,6 +37,7 @@ phy-exynos-usb2-$(CONFIG_PHY_EXYNOS4X12_USB2) += phy-exynos4x12-usb2.o
> phy-exynos-usb2-$(CONFIG_PHY_EXYNOS5250_USB2) += phy-exynos5250-usb2.o
> phy-exynos-usb2-$(CONFIG_PHY_S5PV210_USB2) += phy-s5pv210-usb2.o
> obj-$(CONFIG_PHY_EXYNOS5_USBDRD) += phy-exynos5-usbdrd.o
> +obj-$(CONFIG_PHY_EXYNOS_PCIE) += phy-exynos-pcie.o
> obj-$(CONFIG_PHY_QCOM_APQ8064_SATA) += phy-qcom-apq8064-sata.o
> obj-$(CONFIG_PHY_ROCKCHIP_USB) += phy-rockchip-usb.o
> obj-$(CONFIG_PHY_ROCKCHIP_INNO_USB2) += phy-rockchip-inno-usb2.o
> diff --git a/drivers/phy/phy-exynos-pcie.c b/drivers/phy/phy-exynos-pcie.c
> new file mode 100644
> index 0000000..b57f49b
> --- /dev/null
> +++ b/drivers/phy/phy-exynos-pcie.c
> @@ -0,0 +1,280 @@
> +/*
> + * Samsung EXYNOS SoC series PCIe PHY driver
> + *
> + * Phy provider for PCIe controller on Exynos SoC series
> + *
> + * Copyright (C) 2016 Samsung Electronics Co., Ltd.

2017?
> + * Jaehoon Chung <jh80.chung@samsung.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include <linux/delay.h>
> +#include <linux/io.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/of_platform.h>
> +#include <linux/platform_device.h>
> +#include <linux/phy/phy.h>
> +#include <linux/regmap.h>
> +
> +/* PCIe Purple registers */
> +#define PCIE_PHY_GLOBAL_RESET 0x000
> +#define PCIE_PHY_COMMON_RESET 0x004
> +#define PCIE_PHY_CMN_REG 0x008
> +#define PCIE_PHY_MAC_RESET 0x00c
> +#define PCIE_PHY_PLL_LOCKED 0x010
> +#define PCIE_PHY_TRSVREG_RESET 0x020
> +#define PCIE_PHY_TRSV_RESET 0x024

Please use BIT() macro for bit definitions.
> +
> +/* PCIe PHY registers */
> +#define PCIE_PHY_IMPEDANCE 0x004
> +#define PCIE_PHY_PLL_DIV_0 0x008
> +#define PCIE_PHY_PLL_BIAS 0x00c
> +#define PCIE_PHY_DCC_FEEDBACK 0x014
> +#define PCIE_PHY_PLL_DIV_1 0x05c
> +#define PCIE_PHY_COMMON_POWER 0x064
> +#define PCIE_PHY_COMMON_PD_CMN BIT(3)
> +#define PCIE_PHY_TRSV0_EMP_LVL 0x084
> +#define PCIE_PHY_TRSV0_DRV_LVL 0x088
> +#define PCIE_PHY_TRSV0_RXCDR 0x0ac
> +#define PCIE_PHY_TRSV0_POWER 0x0c4
> +#define PCIE_PHY_TRSV0_PD_TSV BIT(7)
> +#define PCIE_PHY_TRSV0_LVCC 0x0dc
> +#define PCIE_PHY_TRSV1_EMP_LVL 0x144
> +#define PCIE_PHY_TRSV1_RXCDR 0x16c
> +#define PCIE_PHY_TRSV1_POWER 0x184
> +#define PCIE_PHY_TRSV1_PD_TSV BIT(7)
> +#define PCIE_PHY_TRSV1_LVCC 0x19c
> +#define PCIE_PHY_TRSV2_EMP_LVL 0x204
> +#define PCIE_PHY_TRSV2_RXCDR 0x22c
> +#define PCIE_PHY_TRSV2_POWER 0x244
> +#define PCIE_PHY_TRSV2_PD_TSV BIT(7)
> +#define PCIE_PHY_TRSV2_LVCC 0x25c
> +#define PCIE_PHY_TRSV3_EMP_LVL 0x2c4
> +#define PCIE_PHY_TRSV3_RXCDR 0x2ec
> +#define PCIE_PHY_TRSV3_POWER 0x304
> +#define PCIE_PHY_TRSV3_PD_TSV BIT(7)
> +#define PCIE_PHY_TRSV3_LVCC 0x31c
> +
> +struct exynos_pcie_phy_data {
> + struct phy_ops *ops;
> +};
> +
> +/* For Exynos pcie phy */
> +struct exynos_pcie_phy {
> + const struct exynos_pcie_phy_data *drv_data;
> + void __iomem *phy_base;
> + void __iomem *blk_base; /* For exynos5440 */
> +};
> +
> +static void exynos_pcie_phy_writel(void __iomem *base, u32 val, u32 offset)
> +{
> + writel(val, base + offset);
> +}
> +
> +static u32 exynos_pcie_phy_readl(void __iomem *base, u32 offset)
> +{
> + return readl(base + offset);
> +}
> +
> +/* For Exynos5440 specific functions */
> +static int exynos5440_pcie_phy_init(struct phy *phy)
> +{
> + struct exynos_pcie_phy *ep = phy_get_drvdata(phy);
> +
> + /* DCC feedback control off */
> + exynos_pcie_phy_writel(ep->phy_base, 0x29, PCIE_PHY_DCC_FEEDBACK);
> +
> + /* set TX/RX impedance */
> + exynos_pcie_phy_writel(ep->phy_base, 0xd5, PCIE_PHY_IMPEDANCE);
> +
> + /* set 50Mhz PHY clock */
> + exynos_pcie_phy_writel(ep->phy_base, 0x14, PCIE_PHY_PLL_DIV_0);
> + exynos_pcie_phy_writel(ep->phy_base, 0x12, PCIE_PHY_PLL_DIV_1);
> +
> + /* set TX Differential output for lane 0 */
> + exynos_pcie_phy_writel(ep->phy_base, 0x7f, PCIE_PHY_TRSV0_DRV_LVL);
> +
> + /* set TX Pre-emphasis Level Control for lane 0 to minimum */
> + exynos_pcie_phy_writel(ep->phy_base, 0x0, PCIE_PHY_TRSV0_EMP_LVL);
> +
> + /* set RX clock and data recovery bandwidth */
> + exynos_pcie_phy_writel(ep->phy_base, 0xe7, PCIE_PHY_PLL_BIAS);
> + exynos_pcie_phy_writel(ep->phy_base, 0x82, PCIE_PHY_TRSV0_RXCDR);
> + exynos_pcie_phy_writel(ep->phy_base, 0x82, PCIE_PHY_TRSV1_RXCDR);
> + exynos_pcie_phy_writel(ep->phy_base, 0x82, PCIE_PHY_TRSV2_RXCDR);
> + exynos_pcie_phy_writel(ep->phy_base, 0x82, PCIE_PHY_TRSV3_RXCDR);
> +
> + /* change TX Pre-emphasis Level Control for lanes */
> + exynos_pcie_phy_writel(ep->phy_base, 0x39, PCIE_PHY_TRSV0_EMP_LVL);
> + exynos_pcie_phy_writel(ep->phy_base, 0x39, PCIE_PHY_TRSV1_EMP_LVL);
> + exynos_pcie_phy_writel(ep->phy_base, 0x39, PCIE_PHY_TRSV2_EMP_LVL);
> + exynos_pcie_phy_writel(ep->phy_base, 0x39, PCIE_PHY_TRSV3_EMP_LVL);
> +
> + /* set LVCC */
> + exynos_pcie_phy_writel(ep->phy_base, 0x20, PCIE_PHY_TRSV0_LVCC);
> + exynos_pcie_phy_writel(ep->phy_base, 0xa0, PCIE_PHY_TRSV1_LVCC);
> + exynos_pcie_phy_writel(ep->phy_base, 0xa0, PCIE_PHY_TRSV2_LVCC);
> + exynos_pcie_phy_writel(ep->phy_base, 0xa0, PCIE_PHY_TRSV3_LVCC);

I'm starting to dis-like all this hard-coded hw params. All this should come
from dt. Define a dt binding like this for all hw params..
phy,tx-differential = <val, reg-offset, mask>

and have one API in phy-core to do all these settings.
> +
> + /* pulse for common reset */
> + exynos_pcie_phy_writel(ep->blk_base, 1, PCIE_PHY_COMMON_RESET);
> + udelay(500);

how did you get this delay value? Adding a comment might help.
> + exynos_pcie_phy_writel(ep->blk_base, 0, PCIE_PHY_COMMON_RESET);
> +
> + return 0;
> +}
> +
> +static int exynos5440_pcie_phy_power_on(struct phy *phy)
> +{
> + struct exynos_pcie_phy *ep = phy_get_drvdata(phy);
> + u32 val;
> +
> + exynos_pcie_phy_writel(ep->blk_base, 0, PCIE_PHY_COMMON_RESET);
> + exynos_pcie_phy_writel(ep->blk_base, 0, PCIE_PHY_CMN_REG);
> + exynos_pcie_phy_writel(ep->blk_base, 0, PCIE_PHY_TRSVREG_RESET);
> + exynos_pcie_phy_writel(ep->blk_base, 0, PCIE_PHY_TRSV_RESET);
> +
> + val = exynos_pcie_phy_readl(ep->phy_base, PCIE_PHY_COMMON_POWER);
> + val &= ~PCIE_PHY_COMMON_PD_CMN;
> + exynos_pcie_phy_writel(ep->phy_base, val, PCIE_PHY_COMMON_POWER);
> +
> + val = exynos_pcie_phy_readl(ep->phy_base, PCIE_PHY_TRSV0_POWER);
> + val &= ~PCIE_PHY_TRSV0_PD_TSV;
> + exynos_pcie_phy_writel(ep->phy_base, val, PCIE_PHY_TRSV0_POWER);
> +
> + val = exynos_pcie_phy_readl(ep->phy_base, PCIE_PHY_TRSV1_POWER);
> + val &= ~PCIE_PHY_TRSV1_PD_TSV;
> + exynos_pcie_phy_writel(ep->phy_base, val, PCIE_PHY_TRSV1_POWER);
> +
> + val = exynos_pcie_phy_readl(ep->phy_base, PCIE_PHY_TRSV2_POWER);
> + val &= ~PCIE_PHY_TRSV2_PD_TSV;
> + exynos_pcie_phy_writel(ep->phy_base, val, PCIE_PHY_TRSV2_POWER);
> +
> + val = exynos_pcie_phy_readl(ep->phy_base, PCIE_PHY_TRSV3_POWER);
> + val &= ~PCIE_PHY_TRSV3_PD_TSV;
> + exynos_pcie_phy_writel(ep->phy_base, val, PCIE_PHY_TRSV3_POWER);
> +
> + return 0;
> +}
> +
> +static int exynos5440_pcie_phy_power_off(struct phy *phy)
> +{
> + struct exynos_pcie_phy *ep = phy_get_drvdata(phy);
> + u32 val;
> +
> + while (exynos_pcie_phy_readl(ep->phy_base,
> + PCIE_PHY_PLL_LOCKED) == 0) {
> + val = exynos_pcie_phy_readl(ep->blk_base,
> + PCIE_PHY_PLL_LOCKED);
> + dev_info(&phy->dev, "PLL Locked: 0x%x\n", val);
> + }
> +
> + val = exynos_pcie_phy_readl(ep->phy_base, PCIE_PHY_COMMON_POWER);
> + val |= PCIE_PHY_COMMON_PD_CMN;
> + exynos_pcie_phy_writel(ep->phy_base, val, PCIE_PHY_COMMON_POWER);
> +
> + val = exynos_pcie_phy_readl(ep->phy_base, PCIE_PHY_TRSV0_POWER);
> + val |= PCIE_PHY_TRSV0_PD_TSV;
> + exynos_pcie_phy_writel(ep->phy_base, val, PCIE_PHY_TRSV0_POWER);
> +
> + val = exynos_pcie_phy_readl(ep->phy_base, PCIE_PHY_TRSV1_POWER);
> + val |= PCIE_PHY_TRSV1_PD_TSV;
> + exynos_pcie_phy_writel(ep->phy_base, val, PCIE_PHY_TRSV1_POWER);
> +
> + val = exynos_pcie_phy_readl(ep->phy_base, PCIE_PHY_TRSV2_POWER);
> + val |= PCIE_PHY_TRSV2_PD_TSV;
> + exynos_pcie_phy_writel(ep->phy_base, val, PCIE_PHY_TRSV2_POWER);
> +
> + val = exynos_pcie_phy_readl(ep->phy_base, PCIE_PHY_TRSV3_POWER);
> + val |= PCIE_PHY_TRSV3_PD_TSV;
> + exynos_pcie_phy_writel(ep->phy_base, val, PCIE_PHY_TRSV3_POWER);
> +
> + return 0;
> +}
> +
> +static int exynos5440_pcie_phy_reset(struct phy *phy)
> +{
> + struct exynos_pcie_phy *ep = phy_get_drvdata(phy);
> +
> + exynos_pcie_phy_writel(ep->blk_base, 0, PCIE_PHY_MAC_RESET);
> + exynos_pcie_phy_writel(ep->blk_base, 1, PCIE_PHY_GLOBAL_RESET);
> + exynos_pcie_phy_writel(ep->blk_base, 0, PCIE_PHY_GLOBAL_RESET);
> +
> + return 0;
> +}
> +
> +static struct phy_ops exynos5440_phy_ops = {
> + .init = exynos5440_pcie_phy_init,
> + .power_on = exynos5440_pcie_phy_power_on,
> + .power_off = exynos5440_pcie_phy_power_off,
> + .reset = exynos5440_pcie_phy_reset,

add .owner
> +};
> +
> +static const struct exynos_pcie_phy_data exynos5440_pcie_phy_data = {
> + .ops = &exynos5440_phy_ops,

why do you need a wrapper for phy_ops?
> +};
> +
> +static const struct of_device_id exynos_pcie_phy_match[] = {
> + {
> + .compatible = "samsung,exynos5440-pcie-phy",
> + .data = &exynos5440_pcie_phy_data,
> + },
> + {},
> +};
> +MODULE_DEVICE_TABLE(of, exynos_pcie_phy_match);
> +
> +static int exynos_pcie_phy_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct exynos_pcie_phy *exynos_phy;
> + struct phy *generic_phy;
> + struct phy_provider *phy_provider;
> + struct resource *res;
> + const struct exynos_pcie_phy_data *drv_data;
> +
> + drv_data = of_device_get_match_data(dev);
> + if (!drv_data)
> + return -ENODEV;
> +
> + exynos_phy = devm_kzalloc(dev, sizeof(*exynos_phy), GFP_KERNEL);
> + if (!exynos_phy)
> + return -ENOMEM;
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + exynos_phy->phy_base = devm_ioremap_resource(dev, res);
> + if (IS_ERR(exynos_phy->phy_base))
> + return PTR_ERR(exynos_phy->phy_base);
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
> + exynos_phy->blk_base = devm_ioremap_resource(dev, res);
> + if (IS_ERR(exynos_phy->phy_base))
> + return PTR_ERR(exynos_phy->phy_base);
> +
> + exynos_phy->drv_data = drv_data;
> +
> + generic_phy = devm_phy_create(dev, dev->of_node, drv_data->ops);
> + if (IS_ERR(generic_phy)) {
> + dev_err(dev, "failed to create PHY\n");
> + return PTR_ERR(generic_phy);
> + }
> +
> + phy_set_drvdata(generic_phy, exynos_phy);
> + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
> +
> + return PTR_ERR_OR_ZERO(phy_provider);
> +}
> +
> +static struct platform_driver exynos_pcie_phy_driver = {
> + .probe = exynos_pcie_phy_probe,
> + .driver = {
> + .of_match_table = exynos_pcie_phy_match,
> + .name = "exynos_pcie_phy",
> + }
> +};
> +module_platform_driver(exynos_pcie_phy_driver);
>
Thanks
Kishon

\
 
 \ /
  Last update: 2017-01-16 09:38    [W:0.243 / U:0.556 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site