Messages in this thread Patch in this message | | | From | Maxime Ripard <> | Subject | [PATCH v3 2/13] mmc: sunxi: Gate the clock when rate is 0 | Date | Mon, 16 Jan 2017 17:56:52 +0100 |
| |
The MMC core assumes that the code will gate the clock when the bus frequency is set to 0, which we've been ignoring so far.
Handle that.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> --- drivers/mmc/host/sunxi-mmc.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/mmc/host/sunxi-mmc.c b/drivers/mmc/host/sunxi-mmc.c index ab4324e6eb74..019f95e8e7c5 100644 --- a/drivers/mmc/host/sunxi-mmc.c +++ b/drivers/mmc/host/sunxi-mmc.c @@ -765,6 +765,9 @@ static int sunxi_mmc_clk_set_rate(struct sunxi_mmc_host *host, if (ret) return ret; + if (!ios->clock) + return 0; + /* 8 bit DDR requires a higher module clock */ if (ios->timing == MMC_TIMING_MMC_DDR52 && ios->bus_width == MMC_BUS_WIDTH_8) @@ -882,7 +885,7 @@ static void sunxi_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) mmc_writel(host, REG_GCTRL, rval); /* set up clock */ - if (ios->clock && ios->power_mode) { + if (ios->power_mode) { host->ferror = sunxi_mmc_clk_set_rate(host, ios); /* Android code had a usleep_range(50000, 55000); here */ } -- git-series 0.8.11
| |