Messages in this thread | | | Subject | Re: [PATCH 0/3] ti,ads7950 device tree bindings | From | David Lechner <> | Date | Sun, 15 Jan 2017 17:44:57 -0600 |
| |
On 01/15/2017 07:58 AM, Jonathan Cameron wrote: > On 11/01/17 17:52, David Lechner wrote: >> This series adds device tree bindings for the TI ADS7950 family of A/DC chips. >> The series includes the bindings documentation and some fixes to the iio driver >> to make it work with the device tree bindings. >> >> FYI, the ads7950 driver has not made it into mainline yet, so no worries about >> breaking anyone with these changes. >> > And here's the bit I failed to read! > > As an extra point, could you confirm what /sys/bus/iio/iio\:deviceX/name for this > one reads? I have a feeling this is another case of what Lars has been pointing > out in other drivers this morning. That name should be the device part number.. >
cat /sys/bus/iio/devices/iio\:device0/name ads7957
This is the part number for the specific chip I am using. So, I am guessing that it is correct unless it is supposed to be upper case or something like that.
> Thanks, > > Jonathan >> David Lechner (3): >> DT/bindings: Add bindings for TI ADS7950 A/DC chips >> iio: adc: ti-ads7950: Drop "ti-" prefix from module name >> iio: adc: ti-ads7950: Change regulator matching string to "vref" >> >> .../devicetree/bindings/iio/adc/ti-ads7950.txt | 23 ++++++++++++++++ >> drivers/iio/adc/ti-ads7950.c | 32 +++++++++++----------- >> 2 files changed, 39 insertions(+), 16 deletions(-) >> create mode 100644 Documentation/devicetree/bindings/iio/adc/ti-ads7950.txt >> >
| |